From 802a6e63f20b16a8d1ca0cf97db45a6e821a5ef3 Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Tue, 15 Nov 2005 16:49:38 +0000 Subject: Pull in common files from proxsmtp project. --- common/compat.c | 504 ------------- common/compat.h | 134 ---- common/smtppass.c | 2021 ----------------------------------------------------- common/smtppass.h | 281 -------- common/sock_any.c | 385 ---------- common/sock_any.h | 90 --- common/spio.c | 638 ----------------- common/sppriv.h | 77 -- common/stringx.c | 174 ----- common/stringx.h | 53 -- common/usuals.h | 78 --- 11 files changed, 4435 deletions(-) delete mode 100644 common/compat.c delete mode 100644 common/compat.h delete mode 100644 common/smtppass.c delete mode 100644 common/smtppass.h delete mode 100644 common/sock_any.c delete mode 100644 common/sock_any.h delete mode 100644 common/spio.c delete mode 100644 common/sppriv.h delete mode 100644 common/stringx.c delete mode 100644 common/stringx.h delete mode 100644 common/usuals.h diff --git a/common/compat.c b/common/compat.c deleted file mode 100644 index 40e4c73..0000000 --- a/common/compat.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * Copyright (c) 2004-2005, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - * - * PORTIONS FROM OPENBSD: ------------------------------------------------- - * - * Copyright (c) 1998 Todd C. Miller - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; - * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF - * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - - -#include "usuals.h" -#include "compat.h" - -#include -#include - -#ifndef HAVE_REALLOCF - -void* reallocf(void* ptr, size_t size) -{ - void* ret = realloc(ptr, size); - - if(!ret && size) - free(ptr); - - return ret; -} - -#endif - -#ifndef HAVE_STRLWR -char* strlwr(char* s) -{ - char* t = s; - while(*t) - { - *t = tolower(*t); - t++; - } - return s; -} -#endif - -#ifndef HAVE_STRUPR -char* strupr(char* s) -{ - char* t = s; - while(*t) - { - *t = toupper(*t); - t++; - } - return s; -} -#endif - -#ifndef HAVE_STRLCPY - -size_t strlcpy(char* dst, const char* src, size_t siz) -{ - char* d = dst; - const char* s = src; - size_t n = siz; - - /* Copy as many bytes as will fit */ - if(n != 0 && --n != 0) - { - do - { - if((*d++ = *s++) == 0) - break; - } - while(--n != 0); - } - - /* Not enough room in dst, add NUL and traverse rest of src */ - if(n == 0) - { - if(siz != 0) - *d = '\0'; /* NUL-terminate dst */ - while (*s++) - ; - } - - return s - src - 1; /* count does not include NUL */ -} - -#endif - -#ifndef HAVE_STRLCAT - -size_t strlcat(char* dst, const char* src, size_t siz) -{ - char* d = dst; - const char* s = src; - size_t n = siz; - size_t dlen; - - /* Find the end of dst and adjust bytes left but don't go past end */ - while(n-- != 0 && *d != '\0') - d++; - dlen = d - dst; - n = siz - dlen; - - if(n == 0) - return dlen + strlen(s); - while(*s != '\0') - { - if(n != 1) - { - *d++ = *s; - n--; - } - - s++; - } - - *d = '\0'; - - return dlen + (s - src); /* count does not include NUL */ -} - -#endif - -#ifndef HAVE_SETENV - -#include - -int setenv(const char* name, const char* value, int overwrite) -{ - char* t; - int r; - if(getenv(name) && !overwrite) - return 0; - t = (char*)malloc((strlen(name) + strlen(value) + 2) * sizeof(char)); - if(!t) return -1; - sprintf(t, "%s=%s", name, value); - r = putenv(t); - if(r != 0) - free(t); - return r; -} - -#endif - -#ifndef HAVE_DAEMON - -#include -#include -#include -#include -#include - -int daemon(int nochdir, int noclose) -{ - struct sigaction osa, sa; - int oerrno, fd, osa_ok; - pid_t newgrp; - - /* A SIGHUP may be thrown when the parent exits below. */ - sigemptyset(&sa.sa_mask); - sa.sa_handler = SIG_IGN; - sa.sa_flags = 0; - osa_ok = sigaction(SIGHUP, &sa, &osa); - - switch(fork()) - { - case -1: - return -1; - case 0: - break; - default: - _exit(0); - } - - newgrp = setsid(); - oerrno = errno; - if(osa_ok != -1) - sigaction(SIGHUP, &osa, NULL); - if(newgrp == -1) - { - errno = oerrno; - return -1; - } - if(!nochdir) - chdir("/"); - if(!noclose && (fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) - { - dup2(fd, STDIN_FILENO); - dup2(fd, STDOUT_FILENO); - dup2(fd, STDERR_FILENO); - if(fd > 2) - close(fd); - } - return 0; - -} - -#endif - -#ifndef HAVE_GETLINE - -ssize_t getline(char** lineptr, size_t* n, FILE* stream) -{ - return getdelim(lineptr, n, '\n', stream); -} - -#endif - -#ifndef HAVE_GETDELIM - -ssize_t getdelim(char** lineptr, size_t* n, int delim, FILE* stream) -{ - size_t written = 0; - int allocated, ch; - ssize_t ret = -1; - char* p; - - if(!n || !lineptr || !stream) - { - errno = EINVAL; - return -1; - } - - /* Track whether we allocated this or not */ - allocated = !(*lineptr); - -#ifdef HAVE_FLOCKFILE - /* Affects performance on Solaris. */ - flockfile(stream); -#endif - - for(;;) - { - if(!*lineptr) - *n = 0; - - /* Reallocate if we need more space */ - if(written == *n - 1) - { - *n = *n ? *n * 2 : 256; - if(!(p = (char*)realloc(*lineptr, *n))) - { - if(allocated && *lineptr) - free(*lineptr); - errno = ENOMEM; - ret = -1; - goto finally; - } - *lineptr = p; - } - - while(written < *n - 1) - { -#ifdef HAVE_FLOCKFILE - ch = getc_unlocked(stream); -#else - ch = fgetc(stream); -#endif - - if(ferror(stream)) - { - if(allocated && *lineptr) - free(*lineptr); - ret = -1; - goto finally; - } - - if(ch != EOF) - (*lineptr)[written++] = ch; - - /* Done, null terminate, return */ - if(ch == EOF || ch == delim) - { - (*lineptr)[written] = 0; - ret = written ? written : -1; - goto finally; - } - } - } -finally: - -#ifdef HAVE_FLOCKFILE - funlockfile(stream); -#endif - return ret; -} - -#endif - -#ifndef HAVE_ERR_H - -#include -#include -#include -#include - -extern char** __argv; - -static const char* calc_prog_name() -{ - static char prognamebuf[256]; - static int prepared = 0; - - if(!prepared) - { - const char* beg = strrchr(__argv[0], '\\'); - const char* temp = strrchr(__argv[0], '/'); - beg = (beg > temp) ? beg : temp; - beg = (beg) ? beg + 1 : __argv[0]; - - temp = strrchr(__argv[0], '.'); - temp = (temp > beg) ? temp : __argv[0] + strlen(__argv[0]); - - if((temp - beg) > 255) - temp = beg + 255; - - strncpy(prognamebuf, beg, temp - beg); - prognamebuf[temp - beg] = 0; - prepared = 1; - } - - return prognamebuf; -} - -static FILE* err_file; /* file to use for error output */ - -/* - * This is declared to take a `void *' so that the caller is not required - * to include first. However, it is really a `FILE *', and the - * manual page documents it as such. - */ -void err_set_file(void *fp) -{ - if (fp) - err_file = fp; - else - err_file = stderr; -} - -void err(int eval, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - verrc(eval, errno, fmt, ap); - va_end(ap); -} - -void verr(int eval, const char *fmt, va_list ap) -{ - verrc(eval, errno, fmt, ap); -} - -void errc(int eval, int code, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - verrc(eval, code, fmt, ap); - va_end(ap); -} - -void verrc(int eval, int code, const char *fmt, va_list ap) -{ - if (err_file == 0) - err_set_file((FILE *)0); - fprintf(err_file, "%s: ", calc_prog_name()); - if (fmt != NULL) { - vfprintf(err_file, fmt, ap); - fprintf(err_file, ": "); - } - fprintf(err_file, "%s\n", strerror(code)); - exit(eval); -} - -void errx(int eval, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - verrx(eval, fmt, ap); - va_end(ap); -} - -void verrx(int eval, const char *fmt, va_list ap) -{ - if (err_file == 0) - err_set_file((FILE *)0); - fprintf(err_file, "%s: ", calc_prog_name()); - if (fmt != NULL) - vfprintf(err_file, fmt, ap); - fprintf(err_file, "\n"); - exit(eval); -} - -void warn(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - vwarnc(errno, fmt, ap); - va_end(ap); -} - -void vwarn(const char *fmt, va_list ap) -{ - vwarnc(errno, fmt, ap); -} - -void warnc(int code, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - vwarnc(code, fmt, ap); - va_end(ap); -} - -void vwarnc(int code, const char *fmt, va_list ap) -{ - if (err_file == 0) - err_set_file((FILE *)0); - fprintf(err_file, "%s: ", calc_prog_name()); - if (fmt != NULL) - { - vfprintf(err_file, fmt, ap); - fprintf(err_file, ": "); - } - fprintf(err_file, "%s\n", strerror(code)); -} - -void warnx(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - vwarnx(fmt, ap); - va_end(ap); -} - -void vwarnx(const char *fmt, va_list ap) -{ - if(err_file == 0) - err_set_file((FILE*)0); - fprintf(err_file, "%s: ", calc_prog_name()); - if(fmt != NULL) - vfprintf(err_file, fmt, ap); - fprintf(err_file, "\n"); -} - -#endif - diff --git a/common/compat.h b/common/compat.h deleted file mode 100644 index 746cd4f..0000000 --- a/common/compat.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef _COMPAT_H_ -#define _COMPAT_H_ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include - -#ifndef HAVE_STDARG_H -#error ERROR: Must have a working stdarg.h header -#else -#include -#endif - -#ifndef HAVE_REALLOCF -void* reallocf(void* p, size_t sz); -#endif - -#include - -#if HAVE_ERR_MUTEX == 1 -# define MUTEX_TYPE PTHREAD_MUTEX_ERRORCHECK_NP -#else -# if HAVE_ERR_MUTEX == 2 -# define MUTEX_TYPE PTHREAD_MUTEX_ERRORCHECK -# else -# undef MUTEX_TYPE -# endif -#endif - -#ifndef HAVE_STRLWR -char* strlwr(char* s); -#endif - -#ifndef HAVE_STRUPR -char* strupr(char* s); -#endif - -#ifndef HAVE_STRLCAT -size_t strlcat(char *dst, const char *src, size_t size); -#endif - -#ifndef HAVE_STRLCPY -size_t strlcpy(char *dst, const char *src, size_t size); -#endif - -#ifndef HAVE_SETENV -int setenv(const char* name, const char* value, int overwrite); -#endif - -#ifndef HAVE_DAEMON -int daemon(int nochdir, int noclose); -#endif - -#ifndef HAVE_GETLINE -ssize_t getline(char** lineptr, size_t* n, FILE* stream); -#endif - -#ifndef HAVE_GETDELIM -ssize_t getdelim(char** lineptr, size_t* n, int delim, FILE* stream); -#endif - -#ifdef HAVE_ERR_H -#include -#else -#include -void err_set_file(void *fp); -void err_set_exit(void (*ef)(int)); -void err(int eval, const char *fmt, ...); -void verr(int eval, const char *fmt, va_list ap); -void errc(int eval, int code, const char *fmt, ...); -void verrc(int eval, int code, const char *fmt, va_list ap); -void errx(int eval, const char *fmt, ...); -void verrx(int eval, const char *fmt, va_list ap); -void warn(const char *fmt, ...); -void vwarn(const char *fmt, va_list ap); -void warnc(int code, const char *fmt, ...); -void vwarnc(int code, const char *fmt, va_list ap); -void warnx(const char *fmt, ...); -void vwarnx(const char *fmt, va_list ap); -#endif - -#ifdef HAVE_PATHS_H -#include -#endif - -#ifndef _PATH_DEVNULL -#define _PATH_DEVNULL "/dev/null" -#endif - -#ifndef _PATH_TMP -#define _PATH_TMP "/tmp" -#endif - -#endif /* _COMPAT_H_ */ diff --git a/common/smtppass.c b/common/smtppass.c deleted file mode 100644 index f8129ed..0000000 --- a/common/smtppass.c +++ /dev/null @@ -1,2021 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * Andreas Steinmetz - * Rubio Vaughan - * Olivier Beyssac - */ - -#define _GNU_SOURCE - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "usuals.h" - -#ifdef LINUX_TRANSPARENT_PROXY -#include -#endif - -#include "compat.h" -#include "sock_any.h" -#include "stringx.h" -#include "sppriv.h" - -/* ----------------------------------------------------------------------- - * STRUCTURES - */ - -typedef struct spthread -{ - pthread_t tid; /* Written to by the main thread */ - int fd; /* The file descriptor or -1 */ -} -spthread_t; - -/* ----------------------------------------------------------------------- - * DATA - */ - -#define CRLF "\r\n" - -#define SMTP_TOOLONG "500 Line too long" CRLF -#define SMTP_STARTBUSY "421 Server busy, too many connections" CRLF -#define SMTP_STARTFAILED "421 Local Error, cannot start thread" CRLF -#define SMTP_DATAINTERMED "354 Start mail input; end with ." CRLF -#define SMTP_FAILED "451 Local Error" CRLF -#define SMTP_NOTSUPP "502 Command not implemented" CRLF -#define SMTP_NOTAUTH "554 Insufficient authorization" CRLF -#define SMTP_OK "250 Ok" CRLF -#define SMTP_REJPREFIX "550 Content Rejected; " - -#define SMTP_DATA "DATA" CRLF -#define SMTP_NOOP "NOOP" CRLF -#define SMTP_XCLIENT "XCLIENT ADDR=%s" CRLF -#define SMTP_BANNER "220 smtp.passthru" CRLF -#define SMTP_HELO_RSP "250 smtp.passthru" CRLF -#define SMTP_EHLO_RSP "250-smtp.passthru" CRLF -#define SMTP_FEAT_RSP "250 XFILTERED" CRLF -#define SMTP_DELIMS "\r\n\t :" -#define SMTP_MULTI_DELIMS " -" - -#define ESMTP_PIPELINE "PIPELINING" -#define ESMTP_TLS "STARTTLS" -#define ESMTP_CHUNK "CHUNKING" -#define ESMTP_BINARY "BINARYMIME" -#define ESMTP_CHECK "CHECKPOINT" -#define ESMTP_XCLIENT "XCLIENT" -#define ESMTP_XEXCH50 "XEXCH50" - -#define HELO_CMD "HELO" -#define EHLO_CMD "EHLO" -#define FROM_CMD "MAIL FROM" -#define TO_CMD "RCPT TO" -#define DATA_CMD "DATA" -#define RSET_CMD "RSET" -#define STARTTLS_CMD "STARTTLS" -#define BDAT_CMD "BDAT" -#define XCLIENT_CMD "XCLIENT" - -#define DATA_END_SIG "." CRLF - -#define DATA_RSP "354" -#define OK_RSP "250" -#define START_RSP "220" - -#define RCVD_HEADER "Received:" - -/* The set of delimiters that can be present between config and value */ -#define CFG_DELIMS ": \t" - -/* Maximum length of the header argument */ -#define MAX_HEADER_LENGTH 1024 - -/* - * asctime_r manpage: "stores the string in a user-supplied buffer of - * length at least 26". We'll need some more bytes to put timezone - * information behind - */ -#define MAX_DATE_LENGTH 64 - -#define LINE_TOO_LONG(l) ((l) >= (SP_LINE_LENGTH - 2)) - -/* ----------------------------------------------------------------------- - * CONFIGURATION OPTIONS - * - * - Be sure that your configuration option needs to go into this - * file. More likely it'll go into clamsmtpd.c - * - When adding configuration options follow the instructions in - * clamsmtpd.c, except add option to spstate_t (sppriv.h) and parse in - * sp_parse_option (below) - */ - -#define CFG_MAXTHREADS "MaxConnections" -#define CFG_TIMEOUT "TimeOut" -#define CFG_OUTADDR "OutAddress" -#define CFG_LISTENADDR "Listen" -#define CFG_HEADER "Header" -#define CFG_TRANSPARENT "TransparentProxy" -#define CFG_DIRECTORY "TempDirectory" -#define CFG_KEEPALIVES "KeepAlives" -#define CFG_USER "User" -#define CFG_PIDFILE "PidFile" -#define CFG_XCLIENT "XClient" - -/* ----------------------------------------------------------------------- - * DEFAULT SETTINGS - */ - -#define DEFAULT_SOCKET "10025" -#define DEFAULT_PORT 10025 -#define DEFAULT_MAXTHREADS 64 -#define DEFAULT_TIMEOUT 180 -#define DEFAULT_KEEPALIVES 0 - -/* ----------------------------------------------------------------------- - * GLOBALS - */ - -spstate_t g_state; /* The state and configuration of the daemon */ -unsigned int g_unique_id = 0x00100000; /* For connection ids */ -pthread_mutex_t g_mutex; /* The main mutex */ -pthread_mutexattr_t g_mtxattr; - -/* ----------------------------------------------------------------------- - * FORWARD DECLARATIONS - */ - -static void on_quit(int signal); -static void drop_privileges(); -static void pid_file(int write); -static void connection_loop(int sock); -static void* thread_main(void* arg); -static int smtp_passthru(spctx_t* ctx); -static int make_connections(spctx_t* ctx, int client); -static int read_server_response(spctx_t* ctx); -static int parse_config_file(const char* configfile); -static char* parse_address(char* line); -static const char* get_successful_rsp(const char* line, int* cont); -static void do_server_noop(spctx_t* ctx); - -/* Used externally in some cases */ -int sp_parse_option(const char* name, const char* option); - -/* ---------------------------------------------------------------------------------- - * BASIC RUN FUNCTIONALITY - */ - -void sp_init(const char* name) -{ - int r; - - ASSERT(name); - - memset(&g_state, 0, sizeof(g_state)); - - sp_message(NULL, LOG_DEBUG, "%s (%s)", name, VERSION); - - /* Setup the defaults */ - g_state.debug_level = -1; - g_state.max_threads = DEFAULT_MAXTHREADS; - g_state.timeout.tv_sec = DEFAULT_TIMEOUT; - g_state.keepalives = DEFAULT_KEEPALIVES; - g_state.directory = _PATH_TMP; - g_state.name = name; - - /* We need the default to parse into a useable form, so we do this: */ - r = sp_parse_option(CFG_LISTENADDR, DEFAULT_SOCKET); - ASSERT(r == 1); - - /* Create the main mutex and condition variable */ - if(pthread_mutexattr_init(&g_mtxattr) != 0 || -#ifdef HAVE_ERR_MUTEX - pthread_mutexattr_settype(&g_mtxattr, MUTEX_TYPE) || -#endif - pthread_mutex_init(&g_mutex, &g_mtxattr) != 0) - errx(1, "threading problem. can't create mutex or condition var"); -} - -int sp_run(const char* configfile, const char* pidfile, int dbg_level) -{ - int sock; - int true = 1; - - ASSERT(configfile); - ASSERT(g_state.name); - - if(!(dbg_level == -1 || dbg_level <= LOG_DEBUG)) - errx(2, "invalid debug log level (must be between 1 and 4)"); - g_state.debug_level = dbg_level; - g_state.pidfile = pidfile; - - /* Now parse the configuration file */ - if(parse_config_file(configfile) == -1) - { - /* - * We used to do a check here before whether it was the default - * configuration file or not, but we can't do that any longer - * as it comes from the app. Usually lack of a configuration - * file will cause the following checks to fail - */ - warnx("configuration file not found: %s", configfile); - } - - /* This option has no default, but is required ... */ - if(g_state.outname == NULL && !g_state.transparent) - errx(2, "no " CFG_OUTADDR " specified."); - - /* ... unless we're in transparent proxy mode */ - else if(g_state.outname != NULL && g_state.transparent) - warnx("the " CFG_OUTADDR " option will be ignored when " CFG_TRANSPARENT " is enabled"); - - sp_messagex(NULL, LOG_DEBUG, "starting up (%s)...", VERSION); - - /* Drop privileges before daemonizing */ - drop_privileges(); - - /* When set to this we daemonize */ - if(g_state.debug_level == -1) - { - /* Fork a daemon nicely here */ - if(daemon(0, 0) == -1) - { - sp_message(NULL, LOG_ERR, "couldn't run as daemon"); - exit(1); - } - - sp_messagex(NULL, LOG_DEBUG, "running as a daemon"); - g_state.daemonized = 1; - - /* Open the system log */ - openlog(g_state.name, 0, LOG_MAIL); - } - - /* Handle some signals */ - signal(SIGPIPE, SIG_IGN); - signal(SIGHUP, SIG_IGN); - signal(SIGINT, on_quit); - signal(SIGTERM, on_quit); - - siginterrupt(SIGINT, 1); - siginterrupt(SIGTERM, 1); - - /* Create the socket */ - sock = socket(SANY_TYPE(g_state.listenaddr), SOCK_STREAM, 0); - if(sock < 0) - { - sp_message(NULL, LOG_CRIT, "couldn't open socket"); - exit(1); - } - - fcntl(sock, F_SETFD, fcntl(sock, F_GETFD, 0) | FD_CLOEXEC); - setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (void *)&true, sizeof(true)); - - /* Unlink the socket file if it exists */ - if(SANY_TYPE(g_state.listenaddr) == AF_UNIX) - unlink(g_state.listenname); - - if(bind(sock, &SANY_ADDR(g_state.listenaddr), SANY_LEN(g_state.listenaddr)) != 0) - { - sp_message(NULL, LOG_CRIT, "couldn't bind to address: %s", g_state.listenname); - exit(1); - } - - sp_messagex(NULL, LOG_DEBUG, "created socket: %s", g_state.listenname); - - /* Let 5 connections queue up */ - if(listen(sock, 5) != 0) - { - sp_message(NULL, LOG_CRIT, "couldn't listen on socket"); - exit(1); - } - - pid_file(1); - - sp_messagex(NULL, LOG_DEBUG, "accepting connections"); - - connection_loop(sock); - - pid_file(0); - - /* Our listen socket */ - close(sock); - - sp_messagex(NULL, LOG_DEBUG, "stopped processing"); - return 0; -} - -void sp_quit() -{ - /* The handler sets the flag and this also interrupts io */ - kill(getpid(), SIGTERM); -} - -int sp_is_quit() -{ - return g_state.quit ? 1 : 0; -} - -void sp_done() -{ - /* Close the mutex */ - pthread_mutex_destroy(&g_mutex); - pthread_mutexattr_destroy(&g_mtxattr); - - if(g_state._p) - free(g_state._p); - - memset(&g_state, 0, sizeof(g_state)); -} - -static void on_quit(int signal) -{ - g_state.quit = 1; -} - -static void drop_privileges() -{ - char* t; - struct passwd* pw; - uid_t uid; - - if(g_state.user) - { - if(geteuid() != 0) - { - sp_messagex(NULL, LOG_WARNING, "must be started as root to switch to user: %s", g_state.user); - return; - } - - uid = strtol(g_state.user, &t, 10); - if(!t[0]) /* successful parse */ - pw = getpwuid(uid); - else /* must be a name */ - pw = getpwnam(g_state.user); - - if(pw == NULL) - errx(1, "couldn't look up user: %s", g_state.user); - - if(setgid(pw->pw_gid) == -1 || - setuid(pw->pw_uid) == -1) - err(1, "unable to switch to user: %s (uid %d, gid %d)", g_state.user, pw->pw_uid, pw->pw_gid); - - /* A paranoia check */ - if(setreuid(-1, 0) == 0) - err(1, "unable to completely drop privileges"); - - sp_messagex(NULL, LOG_DEBUG, "switched to user %s (uid %d, gid %d)", g_state.user, pw->pw_uid, pw->pw_gid); - } - - if(geteuid() == 0) - sp_messagex(NULL, LOG_WARNING, "running as root is NOT recommended"); -} - - -static void pid_file(int write) -{ - if(!g_state.pidfile) - return; - - if(write) - { - FILE* f = fopen(g_state.pidfile, "w"); - if(f == NULL) - { - sp_message(NULL, LOG_ERR, "couldn't open pid file: %s", g_state.pidfile); - } - else - { - fprintf(f, "%d\n", (int)getpid()); - - if(ferror(f)) - sp_message(NULL, LOG_ERR, "couldn't write to pid file: %s", g_state.pidfile); - if(fclose(f) == EOF) - sp_message(NULL, LOG_ERR, "couldn't write to pid file: %s", g_state.pidfile); - - } - - sp_messagex(NULL, LOG_DEBUG, "wrote pid file: %s", g_state.pidfile); - } - - else - { - unlink(g_state.pidfile); - sp_messagex(NULL, LOG_DEBUG, "removed pid file: %s", g_state.pidfile); - } -} - -static void connection_loop(int sock) -{ - spthread_t* threads = NULL; - int fd, i, x, r; - - /* Create the thread buffers */ - threads = (spthread_t*)calloc(g_state.max_threads, sizeof(spthread_t)); - if(!threads) - { - sp_messagex(NULL, LOG_CRIT, "out of memory"); - return; - } - - /* Now loop and accept the connections */ - while(!sp_is_quit()) - { - fd = accept(sock, NULL, NULL); - if(fd == -1) - { - switch(errno) - { - case EINTR: - case EAGAIN: - break; - - case ECONNABORTED: - sp_message(NULL, LOG_ERR, "couldn't accept a connection"); - break; - - default: - sp_message(NULL, LOG_ERR, "couldn't accept a connection"); - break; - }; - - if(sp_is_quit()) - break; - - continue; - } - - /* Set timeouts on client */ - if(setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &(g_state.timeout), sizeof(g_state.timeout)) < 0 || - setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &(g_state.timeout), sizeof(g_state.timeout)) < 0) - sp_message(NULL, LOG_DEBUG, "couldn't set timeouts on incoming connection"); - - fcntl(fd, F_SETFD, fcntl(fd, F_GETFD, 0) | FD_CLOEXEC); - - /* Look for thread and also clean up others */ - for(i = 0; i < g_state.max_threads; i++) - { - /* Find a thread to run or clean up old threads */ - if(threads[i].tid != 0) - { - sp_lock(); - x = threads[i].fd; - sp_unlock(); - - if(x == -1) - { - sp_messagex(NULL, LOG_DEBUG, "cleaning up completed thread"); - pthread_join(threads[i].tid, NULL); - threads[i].tid = 0; - } -#ifdef _DEBUG - else - { - /* For debugging connection problems: */ - sp_messagex(NULL, LOG_DEBUG, "active connection thread: %x", (int)threads[i].tid); - } -#endif - } - - /* Start a new thread if neccessary */ - if(fd != -1 && threads[i].tid == 0) - { - threads[i].fd = fd; - r = pthread_create(&(threads[i].tid), NULL, thread_main, - (void*)(threads + i)); - if(r != 0) - { - errno = r; - sp_message(NULL, LOG_ERR, "couldn't create thread"); - - write(fd, SMTP_STARTFAILED, KL(SMTP_STARTFAILED)); - shutdown(fd, SHUT_RDWR); - close(fd); - fd = -1; - break; - } - - sp_messagex(NULL, LOG_DEBUG, "created thread for connection"); - fd = -1; - break; - } - } - - /* Check to make sure we have a thread */ - if(fd != -1) - { - sp_messagex(NULL, LOG_ERR, "too many connections open (max %d). sent 554 response", g_state.max_threads); - write(fd, SMTP_STARTBUSY, KL(SMTP_STARTBUSY)); - shutdown(fd, SHUT_RDWR); - close(fd); - fd = -1; - } - } - - sp_messagex(NULL, LOG_DEBUG, "waiting for threads to quit"); - - /* Quit all threads here */ - for(i = 0; i < g_state.max_threads; i++) - { - /* Clean up quit threads */ - if(threads[i].tid != 0) - { - if(threads[i].fd != -1) - { - sp_lock(); - fd = threads[i].fd; - threads[i].fd = -1; - sp_unlock(); - - shutdown(fd, SHUT_RDWR); - close(fd); - } - - pthread_join(threads[i].tid, NULL); - threads[i].tid = 0; - } - } - - free(threads); -} - -static spctx_t* init_thread(int fd) -{ - spctx_t* ctx; - - ctx = cb_new_context(); - if(ctx) - { - memset(ctx, 0, sizeof(*ctx)); - - spio_init(&(ctx->server), "SERVER"); - spio_init(&(ctx->client), "CLIENT"); - - sp_lock(); - /* Assign a unique id to the connection */ - ctx->id = g_unique_id++; - - /* We don't care about wraps, but we don't want zero */ - if(g_unique_id == 0) - g_unique_id++; - sp_unlock(); - - sp_messagex(ctx, LOG_DEBUG, "processing %d on thread %x", fd, (int)pthread_self()); - - /* Connect to the outgoing server ... */ - if(make_connections(ctx, fd) == -1) - { - cb_del_context(ctx); - ctx = NULL; - } - } - - return ctx; -} - -static void cleanup_context(spctx_t* ctx) -{ - ASSERT(ctx); - - if(ctx->cachefile) - { - fclose(ctx->cachefile); - ctx->cachefile = NULL; - } - - if(ctx->cachename[0]) - { - unlink(ctx->cachename); - ctx->cachename[0] = 0; - } - - if(ctx->recipients) - { - free(ctx->recipients); - ctx->recipients = NULL; - } - - if(ctx->sender) - { - free(ctx->sender); - ctx->sender = NULL; - } - - ctx->logline[0] = 0; -} - - -static void done_thread(spctx_t* ctx) -{ - ASSERT(ctx); - - spio_disconnect(ctx, &(ctx->client)); - spio_disconnect(ctx, &(ctx->server)); - - /* Clean up file stuff */ - cleanup_context(ctx); - cb_del_context(ctx); -} - -static void* thread_main(void* arg) -{ - spthread_t* thread = (spthread_t*)arg; - spctx_t* ctx = NULL; - int processing = 0; - int ret = 0; - int fd; - - ASSERT(thread); - - siginterrupt(SIGINT, 1); - siginterrupt(SIGTERM, 1); - - sp_lock(); - /* Get the client socket */ - fd = thread->fd; - sp_unlock(); - - /* Sometimes we get to this point and then quit is noted */ - if(sp_is_quit() || (ctx = init_thread(fd)) == NULL) - { - /* Special case. We don't have a context so clean up descriptor */ - close(fd); - - /* new_context() should have already logged reason */ - RETURN(-1); - } - - /* call the processor */ - processing = 1; - ret = smtp_passthru(ctx); - -cleanup: - - if(ctx) - { - /* Let the client know about fatal errors */ - if(!processing && ret == -1 && spio_valid(&(ctx->client))) - spio_write_data(ctx, &(ctx->client), SMTP_STARTFAILED); - - done_thread(ctx); - } - - /* mark this as done */ - sp_lock(); - thread->fd = -1; - sp_unlock(); - - return (void*)(ret == 0 ? 0 : 1); -} - -static int make_connections(spctx_t* ctx, int client) -{ - struct sockaddr_any peeraddr; - struct sockaddr_any addr; - struct sockaddr_any* outaddr; - char buf[MAXPATHLEN]; - const char* outname; - - ASSERT(client != -1); - - /* Setup the incoming connection. This also fills in peeraddr for us */ - spio_attach(ctx, &(ctx->client), client, &peeraddr); - sp_messagex(ctx, LOG_INFO, "accepted connection from: %s", ctx->client.peername); - - /* Create the server connection address */ - outaddr = &(g_state.outaddr); - outname = g_state.outname; - - /* For transparent proxying we have to discover the address to connect to */ - if(g_state.transparent) - { - memset(&addr, 0, sizeof(addr)); - SANY_LEN(addr) = sizeof(addr); - -#ifdef LINUX_TRANSPARENT_PROXY - if(getsockopt(ctx->client.fd, SOL_IP, SO_ORIGINAL_DST, &SANY_ADDR(addr), &SANY_LEN(addr)) == -1) -#else - if(getsockname(ctx->client.fd, &SANY_ADDR(addr), &SANY_LEN(addr)) == -1) -#endif - { - sp_message(ctx, LOG_ERR, "couldn't get source address for transparent proxying"); - return -1; - } - - /* Check address types */ - if(sock_any_cmp(&addr, &peeraddr, SANY_OPT_NOPORT) == 0) - { - sp_messagex(ctx, LOG_ERR, "loop detected in transparent proxying"); - return -1; - } - - outaddr = &addr; - } - - /* No transparent proxy but check for loopback option */ - else - { - if(SANY_TYPE(*outaddr) == AF_INET && - outaddr->s.in.sin_addr.s_addr == 0) - { - /* Use the incoming IP as the default */ - memcpy(&addr, &(g_state.outaddr), sizeof(addr)); - memcpy(&(addr.s.in.sin_addr), &(peeraddr.s.in.sin_addr), sizeof(addr.s.in.sin_addr)); - outaddr = &addr; - } -#ifdef HAVE_INET6 - else if(SANY_TYPE(*outaddr) == AF_INET6 && - outaddr->s.in.in6.sin_addr.s_addr == 0) - { - /* Use the incoming IP as the default */ - memcpy(&addr, &(g_state.outaddr), sizeof(addr)); - memcpy(&(addr.s.in.sin6_addr), &(peeraddr.s.in.sin6_addr), sizeof(addr.s.in.sin6_addr)); - outaddr = &addr; - } -#endif - } - - /* Reparse name if possible */ - if(outaddr != &(g_state.outaddr)) - { - if(sock_any_ntop(outaddr, buf, MAXPATHLEN, 0) != -1) - outname = buf; - else - outname = "unknown"; - } - - /* Connect to the server */ - if(spio_connect(ctx, &(ctx->server), outaddr, outname) == -1) - return -1; - - return 0; -} - -/* ---------------------------------------------------------------------------------- - * SMTP HANDLING - */ - -static int smtp_passthru(spctx_t* ctx) -{ - char* t; - const char* p; - int r, cont, ret = 0; - unsigned int mask; - int neterror = 0; - - int first_rsp = 1; /* The first 220 response from server to be filtered */ - int filter_host = 0; /* Next response is 250 hostname, which we change */ - - /* XCLIENT is for use in access control */ - int xclient_sup = 0; /* Is XCLIENT supported? */ - int xclient_sent = 0; /* Have we sent an XCLIENT command? */ - - ASSERT(spio_valid(&(ctx->client)) && - spio_valid(&(ctx->server))); - - #define C_LINE ctx->client.line - #define S_LINE ctx->server.line - - while(!sp_is_quit()) - { - mask = spio_select(ctx, &(ctx->client), &(ctx->server), NULL); - - if(mask == ~0) - { - neterror = 1; - RETURN(-1); - } - - /* Client has data available, read a line and process */ - if(mask & 1) - { - if((r = spio_read_line(ctx, &(ctx->client), SPIO_DISCARD)) == -1) - RETURN(-1); - - /* Client disconnected, we're done */ - if(r == 0) - RETURN(0); - - /* We don't let clients send really long lines */ - if(LINE_TOO_LONG(r)) - { - if(spio_write_data(ctx, &(ctx->client), SMTP_TOOLONG) == -1) - RETURN(-1); - - continue; - } - - /* Only valid after EHLO or HELO commands */ - filter_host = 0; - - /* - * At this point we may want to send our XCLIENT. This is a per - * connection command. - */ - if(xclient_sup && !xclient_sent && g_state.xclient) - { - sp_messagex(ctx, LOG_DEBUG, "sending XCLIENT"); - - if(spio_write_dataf(ctx, &(ctx->server), SMTP_XCLIENT, ctx->client.peername) == -1) - RETURN(-1); - - if(read_server_response(ctx) == -1) - RETURN(-1); - - if(!get_successful_rsp(S_LINE, NULL)) - sp_messagex(ctx, LOG_WARNING, "server didn't accept XCLIENT"); - - xclient_sent = 1; - } - - /* Handle the DATA section via our AV checker */ - if(is_first_word(C_LINE, DATA_CMD, KL(DATA_CMD))) - { - /* Send back the intermediate response to the client */ - if(spio_write_data(ctx, &(ctx->client), SMTP_DATAINTERMED) == -1) - RETURN(-1); - - /* - * Now go into avcheck mode. This also handles the eventual - * sending of the data to the server, making the av check - * transparent - */ - if(cb_check_data(ctx) == -1) - RETURN(-1); - - /* Print the log out for this email */ - sp_messagex(ctx, LOG_INFO, "%s", ctx->logline); - - /* Done with that email */ - cleanup_context(ctx); - - /* Command handled */ - continue; - } - - /* - * We need our response to HELO and EHLO to be modified in order - * to prevent complaints about mail loops - */ - else if(is_first_word(C_LINE, EHLO_CMD, KL(EHLO_CMD))) - { - /* EHLO can have multline responses so we set a flag */ - filter_host = 1; - } - - /* - * We always support XCLIENT on a HELO type connection. We do this - * for security reasons, so that a client can't get around filtering - * by backing up one on the protocol. - */ - else if(is_first_word(C_LINE, HELO_CMD, KL(HELO_CMD))) - { - sp_messagex(ctx, LOG_DEBUG, "XCLIENT support assumed"); - xclient_sup = 1; - - /* Filter host as with EHLO above */ - filter_host = 1; - } - - /* - * We don't like these commands. Filter them out. We should have - * filtered out their service extensions earlier in the EHLO response. - * This is just for errant clients. - */ - else if(is_first_word(C_LINE, STARTTLS_CMD, KL(STARTTLS_CMD)) || - is_first_word(C_LINE, BDAT_CMD, KL(BDAT_CMD))) - { - sp_messagex(ctx, LOG_DEBUG, "ESMTP feature not supported"); - - if(spio_write_data(ctx, &(ctx->client), SMTP_NOTSUPP) == -1) - RETURN(-1); - - /* Command handled */ - continue; - } - - /* - * For security reasons we're not about to forward any XCLIENTs - * from our client through. This could lead to a client using our - * privileged IP address to change an audit trail or relay etc... - */ - else if(is_first_word(C_LINE, XCLIENT_CMD, KL(XCLIENT_CMD))) - { - sp_messagex(ctx, LOG_WARNING, "client attempted use of privileged XCLIENT feature"); - - if(spio_write_data(ctx, &(ctx->client), SMTP_NOTAUTH) == -1) - RETURN(-1); - - /* Command handled */ - continue; - } - - /* All other commands just get passed through to server */ - if(spio_write_data(ctx, &(ctx->server), C_LINE) == -1) - RETURN(-1); - - continue; - } - - /* Server has data available, read a line and forward */ - if(mask & 2) - { - if((r = spio_read_line(ctx, &(ctx->server), SPIO_DISCARD)) == -1) - RETURN(-1); - - if(r == 0) - RETURN(0); - - if(LINE_TOO_LONG(r)) - sp_messagex(ctx, LOG_WARNING, "SMTP response line too long. discarded extra"); - - /* - * We intercept the first response we get from the server. - * This allows us to change header so that it doesn't look - * to the client server that we're in a wierd loop. - * - * In different situations using the local hostname or - * 'localhost' don't work because the receiving mail server - * expects one of those to be its own name. We use 'clamsmtp' - * instead. No properly configured server would have this - * as their domain name, and RFC 2821 allows us to use - * an arbitrary but identifying string. - */ - if(first_rsp) - { - first_rsp = 0; - - if(is_first_word(S_LINE, START_RSP, KL(START_RSP))) - { - sp_messagex(ctx, LOG_DEBUG, "intercepting initial response"); - - if(spio_write_data(ctx, &(ctx->client), SMTP_BANNER) == -1) - RETURN(-1); - - /* Command handled */ - continue; - } - } - - if((p = get_successful_rsp(S_LINE, &cont)) != NULL) - { - /* - * Certain mail servers (Postfix 1.x in particular) do a loop check - * on the 250 response after a EHLO or HELO. This is where we - * filter that to prevent loopback errors. - */ - if(filter_host) - { - /* Can have multi-line responses, and we want to be - * sure to only replace the first one. */ - filter_host = 0; - - sp_messagex(ctx, LOG_DEBUG, "intercepting host response"); - - if(spio_write_data(ctx, &(ctx->client), - cont ? SMTP_EHLO_RSP : SMTP_HELO_RSP) == -1) - RETURN(-1); - - /* A new email so cleanup */ - cleanup_context(ctx); - - continue; - } - - /* - * Filter out any EHLO responses that we can't or don't want - * to support. For example pipelining or TLS. - */ - if(is_first_word(C_LINE, EHLO_CMD, KL(EHLO_CMD))) - { - /* - * On ESMTP connections we let the server tell us whether it - * wants XCLIENTs or not. (In contrast to old SMTP above). - */ - if(is_first_word(p, ESMTP_XCLIENT, KL(ESMTP_XCLIENT))) - { - sp_messagex(ctx, LOG_DEBUG, "XCLIENT supported"); - xclient_sup = 1; - } - - if(is_first_word(p, ESMTP_PIPELINE, KL(ESMTP_PIPELINE)) || - is_first_word(p, ESMTP_TLS, KL(ESMTP_TLS)) || - is_first_word(p, ESMTP_CHUNK, KL(ESMTP_CHUNK)) || - is_first_word(p, ESMTP_BINARY, KL(ESMTP_BINARY)) || - is_first_word(p, ESMTP_CHECK, KL(ESMTP_CHECK)) || - is_first_word(p, ESMTP_XCLIENT, KL(ESMTP_XCLIENT)) || - is_first_word(p, ESMTP_XEXCH50, KL(ESMTP_XEXCH50))) - { - sp_messagex(ctx, LOG_DEBUG, "filtered ESMTP feature: %s", trim_space((char*)p)); - - /* - * If this is the last line in the EHLO response we need - * to replace it with something else - */ - if(!cont) - { - if(spio_write_data(ctx, &(ctx->client), SMTP_FEAT_RSP) == -1) - RETURN(-1); - } - - continue; - } - } - - /* MAIL FROM */ - if((r = check_first_word(C_LINE, FROM_CMD, KL(FROM_CMD), SMTP_DELIMS)) > 0) - { - t = parse_address(C_LINE + r); - sp_add_log(ctx, "from=", t); - - /* Make note of the sender for later */ - ctx->sender = (char*)reallocf(ctx->sender, strlen(t) + 1); - if(ctx->sender) - strcpy(ctx->sender, t); - } - - /* RCPT TO */ - else if((r = check_first_word(C_LINE, TO_CMD, KL(TO_CMD), SMTP_DELIMS)) > 0) - { - t = parse_address(C_LINE + r); - sp_add_log(ctx, "to=", t); - - /* Make note of the recipient for later */ - r = ctx->recipients ? strlen(ctx->recipients) : 0; - ctx->recipients = (char*)reallocf(ctx->recipients, r + strlen(t) + 2); - if(ctx->recipients) - { - /* Recipients are separated by lines */ - if(r != 0) - strcat(ctx->recipients, "\n"); - else - ctx->recipients[0] = 0; - - strcat(ctx->recipients, t); - } - } - - /* RSET */ - else if(is_first_word(C_LINE, RSET_CMD, KL(RSET_CMD))) - { - cleanup_context(ctx); - } - } - - if(spio_write_data(ctx, &(ctx->client), S_LINE) == -1) - RETURN(-1); - - continue; - } - } - -cleanup: - - if(!neterror && ret == -1 && spio_valid(&(ctx->client))) - spio_write_data(ctx, &(ctx->client), SMTP_FAILED); - - return ret; -} - -/* ----------------------------------------------------------------------------- - * SMTP PASSTHRU FUNCTIONS FOR DATA CHECK - */ - -static char* parse_address(char* line) -{ - char* t; - line = trim_start(line); - - /* - * We parse out emails in the form of - * as well as accept other addresses. - */ - - if(strncmp(line, "<>", 2) == 0) - return("<>"); - - if(line[0] == '<') - { - if((t = strchr(line, '>')) != NULL) - { - *t = 0; - line++; - return line; - } - } - - return trim_end(line); -} - -static const char* get_successful_rsp(const char* line, int* cont) -{ - /* - * We check for both '250 xxx' type replies - * and the continued response '250-xxxx' type - */ - - line = trim_start(line); - - if(line[0] == '2' && isdigit(line[1]) && isdigit(line[2]) && - (line[3] == ' ' || line[3] == '-')) - { - if(cont) - *cont = (line[3] == '-'); - return line + 4; - } - - return NULL; -} - -void sp_add_log(spctx_t* ctx, char* prefix, char* line) -{ - char* t = ctx->logline; - int l = strlen(t); - int x; - - ASSERT(l <= SP_LOG_LINE_LEN); - - /* Add up necessary lengths */ - x = 2 + strlen(prefix) + strlen(line) + 1; - - if(l + x >= SP_LOG_LINE_LEN) - l = SP_LOG_LINE_LEN - x; - - t += l; - l = SP_LOG_LINE_LEN - l; - - *t = 0; - - if(ctx->logline[0] != 0) - strlcat(t, ", ", l); - - strlcat(t, prefix, l); - - /* Skip initial white space */ - line = trim_start(line); - - strlcat(t, line, l); - - /* Skip later white space */ - trim_end(t); -} - -int sp_read_data(spctx_t* ctx, const char** data) -{ - int r; - - ASSERT(ctx); - ASSERT(data); - - *data = NULL; - - switch(r = spio_read_line(ctx, &(ctx->client), SPIO_QUIET)) - { - case 0: - sp_messagex(ctx, LOG_ERR, "unexpected end of data from client"); - return -1; - case -1: - /* Message already printed */ - return -1; - }; - - if(g_state.keepalives > 0) - { - /* - * During this time we're just reading from the client. If we haven't - * had any interaction with the server recently then send something - * to let it know we're still around. - */ - if((ctx->server.last_action + g_state.keepalives) < time(NULL)) - do_server_noop(ctx); - } - - if(ctx->_crlf && strcmp(ctx->client.line, DATA_END_SIG) == 0) - return 0; - - /* Check if this line ended with a CRLF */ - ctx->_crlf = (strcmp(CRLF, ctx->client.line + (r - KL(CRLF))) == 0); - *data = ctx->client.line; - return r; -} - -int sp_write_data(spctx_t* ctx, const char* buf, int len) -{ - int r = 0; - - ASSERT(ctx); - - /* When a null buffer close the cache file */ - if(!buf) - { - if(ctx->cachefile) - { - if(fclose(ctx->cachefile) == EOF) - { - sp_message(ctx, LOG_ERR, "couldn't write to cache file: %s", ctx->cachename); - r = -1; - } - - ctx->cachefile = NULL; - } - - return r; - } - - /* Make sure we have a file open */ - if(!ctx->cachefile) - { - int tfd; - - /* Make sure afore mentioned file is gone */ - if(ctx->cachename[0]) - unlink(ctx->cachename); - - snprintf(ctx->cachename, MAXPATHLEN, "%s/%s.XXXXXX", - g_state.directory, g_state.name); - - if((tfd = mkstemp(ctx->cachename)) == -1 || - (ctx->cachefile = fdopen(tfd, "w")) == NULL) - { - if(tfd != -1) - close(tfd); - - sp_message(ctx, LOG_ERR, "couldn't open cache file"); - return -1; - } - - fcntl(tfd, F_SETFD, fcntl(tfd, F_GETFD, 0) | FD_CLOEXEC); - sp_messagex(ctx, LOG_DEBUG, "created cache file: %s", ctx->cachename); - } - - fwrite(buf, 1, len, ctx->cachefile); - - if(ferror(ctx->cachefile)) - { - sp_message(ctx, LOG_ERR, "couldn't write to cache file: %s", ctx->cachename); - return -1; - } - - return len; -} - -int sp_cache_data(spctx_t* ctx) -{ - int r, count = 0; - const char* data; - - while((r = sp_read_data(ctx, &data)) != 0) - { - if(r < 0) - return -1; /* Message already printed */ - - count += r; - - if((r = sp_write_data(ctx, data, r)) < 0) - return -1; /* Message already printed */ - } - - /* End the caching */ - if(sp_write_data(ctx, NULL, 0) < 0) - return -1; - - sp_messagex(ctx, LOG_DEBUG, "wrote %d bytes to cache", count); - return count; -} - -/* Important: |date| should be at least MAX_DATE_LENGTH long */ -static void make_date(spctx_t* ctx, char* date) -{ - size_t date_len; - struct tm t2; - time_t t; - - /* Get a basic date like: 'Wed Jun 30 21:49:08 1993' */ - if(time(&t) == (time_t)-1 || - !localtime_r(&t, &t2) || - !asctime_r(&t2, date)) - { - sp_message(ctx, LOG_WARNING, "unable to get date for header"); - date[0] = 0; - return; - } - - trim_end(date); - date_len = strlen(date); - - { -#ifdef HAVE_TM_GMTOFF - time_t timezone = t2.tm_gmtoff; - const char *tzname[2] = { t2.tm_zone, t2.tm_zone }; - - snprintf(date + date_len, MAX_DATE_LENGTH - date_len, " %+03d%02d (%s)", - (int)(timezone / 3600), (int)(timezone % 3600), - tzname[t2.tm_isdst ? 1 : 0]); -#else - /* Apparently Solaris needs this nasty hack.... */ - #define DAY_MIN (24 * HOUR_MIN) - #define HOUR_MIN 60 - #define MIN_SEC 60 - - struct tm gmt; - struct tm *lt; - int off; - - gmt = *gmtime(&t); - lt = localtime(&t); - off = (lt->tm_hour - gmt.tm_hour) * HOUR_MIN + lt->tm_min - gmt.tm_min; - - if (lt->tm_year < gmt.tm_year) - off -= DAY_MIN; - else if (lt->tm_year > gmt.tm_year) - off += DAY_MIN; - else if (lt->tm_yday < gmt.tm_yday) - off -= DAY_MIN; - else if (lt->tm_yday > gmt.tm_yday) - off += DAY_MIN; - if (lt->tm_sec <= gmt.tm_sec - MIN_SEC) - off -= 1; - else if (lt->tm_sec >= gmt.tm_sec + MIN_SEC) - off += 1; - - snprintf(date + date_len, MAX_DATE_LENGTH - date_len, - " %+03d%02d (%s)", (int)(off / HOUR_MIN), (int)(abs(off) % HOUR_MIN), - tzname[lt->tm_isdst ? 1 : 0]); -#endif - } - - /* Break it off just in case */ - date[MAX_DATE_LENGTH - 1] = 0; -} - -/* Important: |header| should be a buffer of MAX_HEADER_LENGTH */ -static int make_header(spctx_t* ctx, const char* format_str, char* header) -{ - char date[MAX_DATE_LENGTH]; - int remaining, l; - const char* f; - char* p; - - date[0] = 0; - remaining = MAX_HEADER_LENGTH - 1; - p = header; - - /* Parse the format string and replace special characters with our data */ - for(f = format_str; *f && remaining > 0; f++) - { - /* A backslash escapes certain characters */ - if(f[0] == '\\' && f[1] != 0) - { - switch(*(++f)) - { - case 'r': - *p = '\r'; - break; - case 'n': - *p = '\n'; - break; - case 't': - *p = '\t'; - break; - default: - *p = *f; - break; - } - - ++p; - --remaining; - } - - /* - * Special symbols: - * %i: client's IP - * %l: server's IP - * %d: date - */ - else if(f[0] == '%' && f[1] != 0) - { - switch(*(++f)) - { - case 'i': - l = strlen(ctx->client.peername); - strncpy(p, ctx->client.peername, remaining); - remaining -= l; - p += l; - break; - case 'l': - l = strlen(ctx->client.localname); - strncpy(p, ctx->client.localname, remaining); - remaining -= l; - p += l; - break; - case 'd': - if(date[0] == 0) - make_date(ctx, date); - l = strlen(date); - strncpy(p, date, remaining); - remaining -= l; - p += l; - break; - case '%': - *p = '%'; - ++p; - break; - default: - sp_messagex(ctx, LOG_WARNING, "invalid header symbol: %%%c", *f); - break; - }; - } - - else - { - *(p++) = *f; - remaining--; - } - } - - if((p + 1) < (header + MAX_HEADER_LENGTH)) - p[1] = 0; - header[MAX_HEADER_LENGTH - 1] = 0; - l = p - header; - return l >= MAX_HEADER_LENGTH ? MAX_HEADER_LENGTH - 1 : l; -} - -int sp_done_data(spctx_t* ctx) -{ - FILE* file = 0; - int ret = 0; - char *line; - char header[MAX_HEADER_LENGTH] = ""; - size_t header_len, line_len; - ssize_t rc; - - ASSERT(ctx->cachename[0]); /* Must still be around */ - ASSERT(!ctx->cachefile); /* File must be closed */ - - memset(header, 0, sizeof(header)); - - /* Alloc line buffer */ - line_len = SP_LINE_LENGTH; - if((line = (char *)malloc(line_len)) == NULL) - RETURN(-1); - - /* Open the file */ - file = fopen(ctx->cachename, "r"); - if(file == NULL) - { - sp_message(ctx, LOG_ERR, "couldn't open cache file: %s", ctx->cachename); - RETURN(-1); - } - - /* Ask the server for permission to send data */ - if(spio_write_data(ctx, &(ctx->server), SMTP_DATA) == -1) - RETURN(-1); - - if(read_server_response(ctx) == -1) - RETURN(-1); - - /* If server returns an error then tell the client */ - if(!is_first_word(ctx->server.line, DATA_RSP, KL(DATA_RSP))) - { - if(spio_write_data(ctx, &(ctx->client), ctx->server.line) == -1) - RETURN(-1); - - sp_messagex(ctx, LOG_DEBUG, "server refused data transfer"); - - RETURN(0); - } - - sp_messagex(ctx, LOG_DEBUG, "sending from cache file: %s", ctx->cachename); - - if(g_state.header) - header_len = make_header(ctx, g_state.header, header); - - /* If we have to prepend the header, do it */ - if(header[0] != '\0' && g_state.header_prepend) - { - if(spio_write_data_raw(ctx, &(ctx->server), (unsigned char*)header, header_len) == -1 || - spio_write_data_raw(ctx, &(ctx->server), (unsigned char*)CRLF, KL(CRLF)) == -1) - RETURN(-1); - header[0] = '\0'; - } - - /* Transfer actual file data */ - while((rc = getline(&line, &line_len, file)) != -1) - { - /* - * If the line is . we need to change it so that - * it doesn't end the email. We do this by adding a space. - * This won't occur much in clamsmtpd, but proxsmtpd might - * have filters that accidentally put this in. - */ - if(strcmp(line, "." CRLF) == 0) - strncpy(line, ". " CRLF, SP_LINE_LENGTH); - - if(header[0] != '\0') - { - /* - * The first blank line we see means the headers are done. - * At this point we add in our virus checked header. - */ - if(is_blank_line(line)) - { - if(spio_write_data_raw(ctx, &(ctx->server), (unsigned char*)header, header_len) == -1 || - spio_write_data_raw(ctx, &(ctx->server), (unsigned char*)CRLF, KL(CRLF)) == -1) - RETURN(-1); - header[0] = '\0'; - } - } - - if(spio_write_data_raw(ctx, &(ctx->server), (unsigned char*)line, rc) == -1) - RETURN(-1); - } - - if(ferror(file)) - sp_message(ctx, LOG_ERR, "error reading cache file: %s", ctx->cachename); - - if(ferror(file) || spio_write_data(ctx, &(ctx->server), DATA_END_SIG) == -1) - { - /* Tell the client it went wrong */ - spio_write_data(ctx, &(ctx->client), SMTP_FAILED); - RETURN(-1); - } - - sp_messagex(ctx, LOG_DEBUG, "sent email data"); - - /* Okay read the response from the server and echo it to the client */ - if(read_server_response(ctx) == -1) - RETURN(-1); - - if(spio_write_data(ctx, &(ctx->client), ctx->server.line) == -1) - RETURN(-1); - -cleanup: - - if(line) - free(line); - if(file) - fclose(file); /* read-only so no error check */ - - return ret; -} - -int sp_fail_data(spctx_t* ctx, const char* smtp_status) -{ - char buf[256 + KL(SMTP_REJPREFIX) + KL(CRLF) + 1]; - char* t = NULL; - int len, x; - int pref = 0; - int crlf = 0; - - if(smtp_status == NULL) - smtp_status = SMTP_FAILED; - - x = strtol(smtp_status, &t, 10); - len = strlen(smtp_status); - - /* We need 3 digits and CRLF at the end for a premade SMTP message */ - if(x == 0 || t != smtp_status + 3) - pref = 1; - - /* We need a CRLF at the end */ - if(strcmp(smtp_status + (len - KL(CRLF)), CRLF) != 0) - crlf = 1; - - if(pref || crlf) - { - /* Note that we truncate long lines */ - snprintf(buf, sizeof(buf), "%s%.256s%s", pref ? SMTP_REJPREFIX : "", - smtp_status, crlf ? CRLF : ""); - buf[sizeof(buf) - 1] = 0; - smtp_status = buf; - } - - if(spio_write_data(ctx, &(ctx->client), smtp_status) == -1) - return -1; - - return 0; -} - -static int read_server_response(spctx_t* ctx) -{ - int r; - - /* Read response line from the server */ - if((r = spio_read_line(ctx, &(ctx->server), SPIO_DISCARD)) == -1) - return -1; - - if(r == 0) - { - sp_messagex(ctx, LOG_ERR, "server disconnected unexpectedly"); - - /* Tell the client it went wrong */ - spio_write_data(ctx, &(ctx->client), SMTP_FAILED); - return 0; - } - - if(LINE_TOO_LONG(r)) - sp_messagex(ctx, LOG_WARNING, "SMTP response line too long. discarded extra"); - - return 0; -} - -static void do_server_noop(spctx_t* ctx) -{ - if(spio_valid(&(ctx->server))) - { - if(spio_write_data(ctx, &(ctx->server), SMTP_NOOP) != -1) - spio_read_line(ctx, &(ctx->server), SPIO_DISCARD); - } -} - -void sp_setup_forked(spctx_t* ctx, int file) -{ - /* Signals we've messed with */ - signal(SIGPIPE, SIG_DFL); - signal(SIGHUP, SIG_DFL); - signal(SIGINT, SIG_DFL); - signal(SIGTERM, SIG_DFL); - - siginterrupt(SIGINT, 0); - siginterrupt(SIGTERM, 0); - - if(ctx->sender) - setenv("SENDER", ctx->sender, 1); - - if(ctx->recipients) - setenv("RECIPIENTS", ctx->recipients, 1); - - if(file && ctx->cachename[0]) - setenv("EMAIL", ctx->cachename, 1); - - if(spio_valid(&(ctx->client))) - setenv("CLIENT", ctx->client.peername, 1); - - if(spio_valid(&(ctx->server))) - setenv("SERVER", ctx->server.peername, 1); - - setenv("TMPDIR", g_state.directory, 1); -} - - -/* ---------------------------------------------------------------------------------- - * LOGGING - */ - -const char kMsgDelimiter[] = ": "; -#define MAX_MSGLEN 256 - -static void vmessage(spctx_t* ctx, int level, int err, - const char* msg, va_list ap) -{ - size_t len; - char* m; - int e = errno; - - if(g_state.daemonized) - { - if(level >= LOG_DEBUG) - return; - } - else - { - if(g_state.debug_level < level) - return; - } - - ASSERT(msg); - - len = strlen(msg) + 20 + MAX_MSGLEN; - m = (char*)alloca(len); - - if(m) - { - if(ctx) - snprintf(m, len, "%06X: %s%s", ctx->id, msg, err ? ": " : ""); - else - snprintf(m, len, "%s%s", msg, err ? ": " : ""); - - if(err) - { - /* strerror_r doesn't want to work for us for some reason - strerror_r(e, m + strlen(m), MAX_MSGLEN); */ - - sp_lock(); - strncat(m, strerror(e), len); - sp_unlock(); - } - - m[len - 1] = 0; - msg = m; - } - - /* Either to syslog or stderr */ - if(g_state.daemonized) - vsyslog(level, msg, ap); - else - vwarnx(msg, ap); -} - -void sp_messagex(spctx_t* ctx, int level, const char* msg, ...) -{ - va_list ap; - - va_start(ap, msg); - vmessage(ctx, level, 0, msg, ap); - va_end(ap); -} - -void sp_message(spctx_t* ctx, int level, const char* msg, ...) -{ - va_list ap; - - va_start(ap, msg); - vmessage(ctx, level, 1, msg, ap); - va_end(ap); -} - - -/* ----------------------------------------------------------------------- - * LOCKING - */ - -void sp_lock() -{ - int r; - -#ifdef _DEBUG - int wait = 0; -#endif - -#ifdef _DEBUG - r = pthread_mutex_trylock(&g_mutex); - if(r == EBUSY) - { - wait = 1; - sp_message(NULL, LOG_DEBUG, "thread will block: %d", pthread_self()); - r = pthread_mutex_lock(&g_mutex); - } - -#else - r = pthread_mutex_lock(&g_mutex); - -#endif - - if(r != 0) - { - errno = r; - sp_message(NULL, LOG_CRIT, "threading problem. couldn't lock mutex"); - } - -#ifdef _DEBUG - else if(wait) - { - sp_message(NULL, LOG_DEBUG, "thread unblocked: %d", pthread_self()); - } -#endif -} - -void sp_unlock() -{ - int r = pthread_mutex_unlock(&g_mutex); - if(r != 0) - { - errno = r; - sp_message(NULL, LOG_CRIT, "threading problem. couldn't unlock mutex"); - } -} - -/* ----------------------------------------------------------------------------- - * CONFIG FILE - */ - -int sp_parse_option(const char* name, const char* value) -{ - char* t; - int ret = 0; - - if(strcasecmp(CFG_MAXTHREADS, name) == 0) - { - g_state.max_threads = strtol(value, &t, 10); - if(*t || g_state.max_threads <= 1 || g_state.max_threads >= 1024) - errx(2, "invalid setting: " CFG_MAXTHREADS " (must be between 1 and 1024)"); - ret = 1; - } - - else if(strcasecmp(CFG_TIMEOUT, name) == 0) - { - g_state.timeout.tv_sec = strtol(value, &t, 10); - if(*t || g_state.timeout.tv_sec <= 0) - errx(2, "invalid setting: " CFG_TIMEOUT); - ret = 1; - } - - else if(strcasecmp(CFG_KEEPALIVES, name) == 0) - { - g_state.keepalives = strtol(value, &t, 10); - if(*t || g_state.keepalives < 0) - errx(2, "invalid setting: " CFG_KEEPALIVES); - ret = 1; - } - - else if(strcasecmp(CFG_XCLIENT, name) == 0) - { - if((g_state.xclient = strtob(value)) == -1) - errx(2, "invalid value for " CFG_XCLIENT); - ret = 1; - } - - else if(strcasecmp(CFG_OUTADDR, name) == 0) - { - if(sock_any_pton(value, &(g_state.outaddr), SANY_OPT_DEFPORT(25)) == -1) - errx(2, "invalid " CFG_OUTADDR " socket name or ip: %s", value); - g_state.outname = value; - ret = 1; - } - - else if(strcasecmp(CFG_LISTENADDR, name) == 0) - { - if(sock_any_pton(value, &(g_state.listenaddr), SANY_OPT_DEFANY | SANY_OPT_DEFPORT(DEFAULT_PORT)) == -1) - errx(2, "invalid " CFG_LISTENADDR " socket name or ip: %s", value); - g_state.listenname = value; - ret = 1; - } - - else if(strcasecmp(CFG_TRANSPARENT, name) == 0) - { - if((g_state.transparent = strtob(value)) == -1) - errx(2, "invalid value for " CFG_TRANSPARENT); - ret = 1; - } - - else if(strcasecmp(CFG_DIRECTORY, name) == 0) - { - if(strlen(value) == 0) - errx(2, "invalid setting: " CFG_DIRECTORY); - g_state.directory = value; - ret = 1; - } - - else if(strcasecmp(CFG_USER, name) == 0) - { - if(strlen(value) == 0) - errx(2, "invalid setting: " CFG_USER); - g_state.user = value; - ret = 1; - } - - else if(strcasecmp(CFG_PIDFILE, name) == 0) - { - if(g_state.pidfile != NULL) - sp_messagex(NULL, LOG_WARNING, "ignoring pid file specified on the command line. "); - - if(strlen(value) == 0) - g_state.pidfile = NULL; - else - g_state.pidfile = value; - ret = 1; - } - - else if(strcasecmp(CFG_HEADER, name) == 0) - { - g_state.header = trim_start(value); - if(strlen(g_state.header) == 0) - g_state.header = NULL; - else if(is_first_word(RCVD_HEADER, g_state.header, KL(RCVD_HEADER))) - g_state.header_prepend = 1; - ret = 1; - } - - /* Always pass through to program */ - if(cb_parse_option(name, value) == 1) - ret = 1; - - return ret; -} - -static int parse_config_file(const char* configfile) -{ - FILE* f = NULL; - long len; - char* p; - char* t; - char* n; - - ASSERT(configfile); - ASSERT(!g_state._p); - - f = fopen(configfile, "r"); - if(f == NULL) - { - /* Soft errors when default config file and not found */ - if((errno == ENOENT || errno == ENOTDIR)) - return -1; - else - err(1, "couldn't open config file: %s", configfile); - } - - /* Figure out size */ - if(fseek(f, 0, SEEK_END) == -1 || (len = ftell(f)) == -1 || fseek(f, 0, SEEK_SET) == -1) - err(1, "couldn't seek config file: %s", configfile); - - if((g_state._p = (char*)malloc(len + 2)) == NULL) - errx(1, "out of memory"); - - /* And read in one block */ - if(fread(g_state._p, 1, len, f) != len) - err(1, "couldn't read config file: %s", configfile); - - fclose(f); - sp_messagex(NULL, LOG_DEBUG, "read config file: %s", configfile); - - /* Double null terminate the data */ - p = g_state._p; - p[len] = '\n'; - p[len + 1] = 0; - - n = g_state._p; - - /* Go through lines and process them */ - while((t = strchr(n, '\n')) != NULL) - { - *t = 0; - p = n; /* Do this before cleaning below */ - n = t + 1; - - p = trim_start(p); - - /* Comments and empty lines */ - if(*p == 0 || *p == '#') - continue; - - /* Look for the break between name: value */ - t = strchr(p, ':'); - if(t == NULL) - errx(2, "invalid config line: %s", p); - - /* Null terminate and split value part */ - *t = 0; - t++; - - t = trim_space(t); - p = trim_space(p); - - /* Pass it through our options parsers */ - if(sp_parse_option(p, t) == 0) - - /* If not recognized then it's invalid */ - errx(2, "invalid config line: %s", p); - - sp_messagex(NULL, LOG_DEBUG, "parsed option: %s: %s", p, t); - } - - return 0; -} - diff --git a/common/smtppass.h b/common/smtppass.h deleted file mode 100644 index 701ecb9..0000000 --- a/common/smtppass.h +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef __SMTPPASS_H__ -#define __SMTPPASS_H__ - -/* Forward declarations */ -struct sockaddr_any; -struct spctx; - -/* ----------------------------------------------------------------------------- - * BUFFERED MULTIPLEXING IO - * - * This isn't meant to be a replacement library for all sorts of IO - * only things that are currently used go here. - */ - -/* - * A generous maximum line length. It needs to be longer than - * a full path on this system can be, because we pass the file - * name to clamd. - */ - -#if 2000 > MAXPATHLEN - #define SP_LINE_LENGTH 2000 -#else - #define SP_LINE_LENGTH (MAXPATHLEN + 128) -#endif - -typedef struct spio -{ - int fd; /* The file descriptor wrapped */ - const char* name; /* The name for logging */ - time_t last_action; /* Time of last action on descriptor */ - char peername[MAXPATHLEN]; /* Name of the peer on other side of socket */ - char localname[MAXPATHLEN]; /* Address where we accepted the connection */ - - /* Internal use only */ - char line[SP_LINE_LENGTH]; - char* _nx; - size_t _ln; -} -spio_t; - -#define spio_valid(io) ((io) && (io)->fd != -1) - -/* Setup the io structure (allocated elsewhere) */ -void spio_init(spio_t* io, const char* name); - -/* Attach an open descriptor to a socket, optionally returning the peer */ -void spio_attach(struct spctx* ctx, spio_t* io, int fd, struct sockaddr_any* peer); - -/* Connect and disconnect from sockets */ -int spio_connect(struct spctx* ctx, spio_t* io, const struct sockaddr_any* sany, const char* addrname); -void spio_disconnect(struct spctx* ctx, spio_t* io); - -#define SPIO_TRIM 0x00000001 -#define SPIO_DISCARD 0x00000002 -#define SPIO_QUIET 0x00000004 - -/* Read a line from a socket. Use options above. Line - * will be found in io->line */ -int spio_read_line(struct spctx* ctx, spio_t* io, int opts); - -/* Write data to socket (must supply line endings if needed). - * Guaranteed to accept all data or fail. */ -int spio_write_data(struct spctx* ctx, spio_t* io, const char* data); -int spio_write_dataf(struct spctx* ctx, spio_t* io, const char* fmt, ...); -int spio_write_data_raw(struct spctx* ctx, spio_t* io, const unsigned char* buf, int len); - -/* Empty the given socket */ -void spio_read_junk(struct spctx* sp, spio_t* io); - -/* Pass up to 31 spio_t*, followed by NULL. Returns bitmap of ready for reading */ -unsigned int spio_select(struct spctx* ctx, ...); - - -/* ----------------------------------------------------------------------------- - * SMTP PASS THROUGH FUNCTIONALITY - */ - -/* Log lines have to be under roughly 900 chars otherwise - * they get truncated by syslog. */ -#define SP_LOG_LINE_LEN 768 - -typedef struct spctx -{ - unsigned int id; /* Identifier for the connection */ - - spio_t client; /* Connection to client */ - spio_t server; /* Connection to server */ - - FILE* cachefile; /* The file handle for the cached file */ - char cachename[MAXPATHLEN]; /* The name of the file that we cache into */ - char logline[SP_LOG_LINE_LEN]; /* Log line */ - - char* sender; /* The email of the sender */ - char* recipients; /* The email of the recipients */ - - int _crlf; /* Private data */ -} -spctx_t; - -/* - * sp_init initializes the SMTP Pass-Through functionality - * The name passed is the name of the app - */ -void sp_init(const char* name); - -/* - * This starts up the smtp pass thru program. It will call - * the cb_* functions as appropriate. - */ -int sp_run(const char* configfile, const char* pidfile, int dbg_level); - -/* - * Mark the application as shutting down. - * A signal will interupt most IO. - */ -void sp_quit(); - -/* - * Check if the application has been marked to quit. - * Useful for checking after interupted IO. - */ -int sp_is_quit(); - -/* - * Called to cleanup SMTP Pass-Through functionality just - * before the application quits. - */ -void sp_done(); - -/* - * clamsmtpd used to accept command line args. In order to - * process those args it needs to send the values to the - * config file routines. This is how it does that. - */ -#ifdef SP_LEGACY_OPTIONS -int sp_parse_option(const char* name, const char* option); -#endif - - -/* - * The following functions are to be called from within - * the spc_check_data function. - */ - -/* - * Adds a piece of info to the log line - */ -void sp_add_log(spctx_t* ctx, char* prefix, char* line); - -/* - * Reads a line of DATA from client. Or less than a line if - * line is longer than LINE_LENGTH. No trimming or anything - * is done on the read line. This will end automatically - * when . is detected (in which case 0 will - * be returned). The data is returned in data. - */ -int sp_read_data(spctx_t* ctx, const char** data); - -/* - * Writes a line (or piece) of data to a file buffer which is - * later sent to the client using sp_done_data. Calling it with - * a NULL buffer closes the cache file. Guaranteed to accept - * all data given to it or fail. - */ -int sp_write_data(spctx_t* ctx, const char* buf, int buflen); - -/* - * Sends all DATA from the client into the cache. The cache - * file is then available (in spctx_t->cachename) for use. - */ -int sp_cache_data(spctx_t* ctx); - -/* - * Sends the data in file buffer off to server. This is - * completes a successful mail transfer. - */ -int sp_done_data(spctx_t* ctx); - -/* - * Fails the data, deletes any temp data, and sends given - * status to client or if NULL then SMTP_DATAFAILED - */ -int sp_fail_data(spctx_t* ctx, const char* smtp_status); - -/* - * Setup the environment with context info. This is useful - * if you're going to fork another process. Be sure to exec - * soon after to prevent the strings from going out of scope. - */ -void sp_setup_forked(spctx_t* ctx, int file); - -/* - * Log a message. levels are syslog levels. Syntax is just - * like printf etc.. Can specify a ctx of NULL in which case - * no connection prefix is prepended. - */ -void sp_message(spctx_t* ctx, int level, const char* msg, ...); -void sp_messagex(spctx_t* ctx, int level, const char* msg, ...); - -/* - * Lock or unlock the main mutex around thread common - * functionality. - */ -void sp_lock(); -void sp_unlock(); - - -/* ----------------------------------------------------------------------------- - * CALLBACKS IMPLMEMENTED BY PROGRAM - */ - -/* - * The following functions create and destroy contexts for a new - * thread. Perform initialization in there and return a spctx - * structure for the thread to use. Return NULL failed. Be sure - * to log message. - */ -extern spctx_t* cb_new_context(); -extern void cb_del_context(spctx_t* ctx); - -/* - * Called when the data section of an email is being transferred. - * Once inside this function you can transfer files using - * sp_read_data, sp_write_data. - * - * After scanning or figuring out the status call either - * sp_done_data or sp_fail_data. Most failures should be handled - * internally using sp_fail_data, unless it's an out of memory - * condition, or sp_fail_data failed. - */ -extern int cb_check_data(spctx_t* ctx); - -/* - * Parse options from the config file. The memory for these - * options will stay around until sp_done is called. Return 0 - * for unrecognized options, 1 for recognized, and quit the - * program for invalid. - */ -extern int cb_parse_option(const char* name, const char* value); - - -#endif /* __SMTPPASS_H__ */ diff --git a/common/sock_any.c b/common/sock_any.c deleted file mode 100644 index fc38768..0000000 --- a/common/sock_any.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "sock_any.h" - -#include - -#define LOCALHOST_ADDR 0x7F000001 - -int sock_any_pton(const char* addr, struct sockaddr_any* any, int opts) -{ - size_t l; - char buf[256]; - char* t; - char* t2; - int defport = (opts & 0xFFFF); - - memset(any, 0, sizeof(*any)); - - /* Just a port? */ - do - { - #define PORT_CHARS "0123456789" - #define PORT_MIN 1 - #define PORT_MAX 5 - - int port = 0; - - l = strspn(addr, PORT_CHARS); - if(l < PORT_MIN || l > PORT_MAX || addr[l] != 0) - break; - - port = strtol(addr, &t2, 10); - if(*t2 || port <= 0 || port >= 65536) - break; - - any->s.in.sin_port = htons(port); - - /* Fill in the type based on defaults */ -#ifdef HAVE_INET6 - if(opts & SANY_OPT_DEFINET6) - any->s.in.sin_family = AF_INET6; - else -#endif - any->s.in.sin_family = AF_INET; - - /* Fill in the address based on defaults */ - if(opts & SANY_OPT_DEFLOCAL) - { -#ifdef HAVE_INET6 - if(opts & SANY_OPT_DEFINET6) - memcpy(&(any->s.in.sin6_addr), &in6addr_loopback, sizeof(struct in6_addr)); - else -#endif - any->s.in.sin_addr.s_addr = htonl(INADDR_LOOPBACK); - } - - /* - * Note the 'any' option is the default since we zero out - * the entire structure above. - */ - - any->namelen = sizeof(any->s.in); - return AF_INET; - } - while(0); - - /* Look and see if we can parse an ipv4 address */ - do - { - #define IPV4_PORT_CHARS - #define IPV4_CHARS "0123456789." - #define IPV4_MIN 3 - #define IPV4_MAX 21 - - int port = 0; - t = NULL; - - l = strlen(addr); - if(l < IPV4_MIN || l > IPV4_MAX) - break; - - strcpy(buf, addr); - - /* Find the last set that contains just numbers */ - l = strspn(buf, IPV4_CHARS); - if(l < IPV4_MIN) - break; - - /* Either end of string or port */ - if(buf[l] != 0 && buf[l] != ':') - break; - - /* Get the port out */ - if(buf[l] != 0) - { - t = buf + l + 1; - buf[l] = 0; - } - - if(t) - { - port = strtol(t, &t2, 10); - if(*t2 || port <= 0 || port >= 65536) - break; - } - - any->s.in.sin_family = AF_INET; - any->s.in.sin_port = htons((unsigned short)(port <= 0 ? defport : port)); - - if(inet_pton(AF_INET, buf, &(any->s.in.sin_addr)) <= 0) - break; - - any->namelen = sizeof(any->s.in); - return AF_INET; - } - while(0); - -#ifdef HAVE_INET6 - do - { - #define IPV6_CHARS "0123456789:" - #define IPV6_MIN 3 - #define IPV6_MAX 51 - - int port = -1; - t = NULL; - - l = strlen(addr); - if(l < IPV6_MIN || l > IPV6_MAX) - break; - - /* If it starts with a '[' then we can get port */ - if(buf[0] == '[') - { - port = 0; - addr++; - } - - strcpy(buf, addr); - - /* Find the last set that contains just numbers */ - l = strspn(buf, IPV6_CHARS); - if(l < IPV6_MIN) - break; - - /* Either end of string or port */ - if(buf[l] != 0) - { - /* If had bracket, then needs to end with a bracket */ - if(port != 0 || buf[l] != ']') - break; - - /* Get the port out */ - t = buf + l + 1; - - if(*t = ':') - t++; - } - - if(t) - { - port = strtol(t, &t, 10); - if(*t || port <= 0 || port >= 65536) - break; - } - - any->s.in6.sin6_family = AF_INET6; - any->s.in6.sin6_port = htons((unsigned short)port <= 0 : defport : port); - - if(inet_pton(AF_INET6, buf, &(any->s.in6.sin6_addr)) >= 0) - break; - - any->namelen = sizeof(any->s.in6); - return AF_INET6; - } - while(0); -#endif - - /* A unix socket path */ - do - { - /* No colon and must have a path component */ - if(strchr(addr, ':') || !strchr(addr, '/')) - break; - - l = strlen(addr); - if(l >= sizeof(any->s.un.sun_path)) - break; - - any->s.un.sun_family = AF_UNIX; - strcpy(any->s.un.sun_path, addr); - - any->namelen = sizeof(any->s.un) - (sizeof(any->s.un.sun_path) - l); - return AF_UNIX; - } - while(0); - - /* A DNS name and a port? */ - do - { - struct addrinfo* res; - int port = 0; - t = NULL; - - l = strlen(addr); - if(l >= 255 || !isalpha(addr[0])) - break; - - /* Some basic illegal character checks */ - if(strcspn(addr, " /\\") != l) - break; - - strcpy(buf, addr); - - /* Find the last set that contains just numbers */ - t = strchr(buf, ':'); - if(t) - { - *t = 0; - t++; - } - - if(t) - { - port = strtol(t, &t2, 10); - if(*t2 || port <= 0 || port >= 65536) - break; - } - - /* Try and resolve the domain name */ - if(getaddrinfo(buf, NULL, NULL, &res) != 0 || !res) - break; - - memcpy(&(any->s.a), res->ai_addr, sizeof(struct sockaddr)); - any->namelen = res->ai_addrlen; - freeaddrinfo(res); - - port = htons((unsigned short)(port <= 0 ? defport : port)); - - switch(any->s.a.sa_family) - { - case PF_INET: - any->s.in.sin_port = port; - break; -#ifdef HAVE_INET6 - case PF_INET6: - any->s.in6.sin6_port = port; - break; -#endif - }; - - return any->s.a.sa_family; - } - while(0); - - return -1; -} - -int sock_any_ntop(const struct sockaddr_any* any, char* addr, size_t addrlen, int opts) -{ - int len = 0; - int port = 0; - - switch(any->s.a.sa_family) - { - case AF_UNIX: - len = strlen(any->s.un.sun_path); - if(addrlen < len + 1) - { - errno = ENOSPC; - return -1; - } - - strcpy(addr, any->s.un.sun_path); - break; - - case AF_INET: - if(inet_ntop(any->s.a.sa_family, &(any->s.in.sin_addr), addr, addrlen) == NULL) - return -1; - port = ntohs(any->s.in.sin_port); - break; - -#ifdef HAVE_INET6 - case AF_INET6: - if(inet_ntop(any->s.a.sa_family, &(any->s.in6.sin6_addr), addr, addrlen) == NULL) - return -1; - port = ntohs(any->s.in6.sin6_port); - break; -#endif - - default: - errno = EAFNOSUPPORT; - return -1; - } - - if(!(opts & SANY_OPT_NOPORT) && port != 0) - { - strncat(addr, ":", addrlen); - addr[addrlen - 1] = 0; - - len = strlen(addr); - addr += len; - addrlen -= len; - - snprintf(addr, addrlen, "%d", port); - } - - return 0; -} - -int sock_any_cmp(const struct sockaddr_any* a1, const struct sockaddr_any* a2, int opts) -{ - if(a1->s.a.sa_family != a2->s.a.sa_family) - return -1; - - switch(a1->s.a.sa_family) - { - case AF_UNIX: - return strcmp(a1->s.un.sun_path, a2->s.un.sun_path); - - case AF_INET: - if(memcmp(&(a1->s.in.sin_addr), &(a2->s.in.sin_addr), sizeof(a2->s.in.sin_addr)) != 0) - return -1; - if(!(opts && SANY_OPT_NOPORT) && a1->s.in.sin_port != a2->s.in.sin_port) - return -1; - return 0; -#ifdef HAVE_INET6 - case AF_INET6: - if(memcmp(&(a1->s.in6.sin6_addr), &(a2->s.in6.sin6_addr), sizeof(a2->s.in6.sin6_addr)) != 0) - return -1; - if(!(opts && SANY_OPT_NOPORT) && a1->s.in6.sin6_port != a2->s.in6.sin6_port) - return -1; - return 0; -#endif - default: - errno = EAFNOSUPPORT; - return -1; - } -} diff --git a/common/sock_any.h b/common/sock_any.h deleted file mode 100644 index 31cb13b..0000000 --- a/common/sock_any.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef __SOCK_ANY_H__ -#define __SOCK_ANY_H__ - -#include -#include -#include - -struct sockaddr_any -{ - union _sockaddr_any - { - /* The header */ - struct sockaddr a; - - /* The different types */ - struct sockaddr_un un; - struct sockaddr_in in; -#ifdef HAVE_INET6 - struct sockaddr_in6 in6; -#endif - } s; - size_t namelen; -}; - -#define SANY_ADDR(any) ((any).s.a) -#define SANY_LEN(any) ((any).namelen) -#define SANY_TYPE(any) ((any).s.a.sa_family) - -int sock_any_pton(const char* addr, struct sockaddr_any* any, int opts); - -/* The default port to fill in when no IP/IPv6 port specified */ -#define SANY_OPT_DEFPORT(p) (int)((p) & 0xFFFF) - -/* When only port specified default to IPANY */ -#define SANY_OPT_DEFANY 0x00000000 - -/* When only port specified default to LOCALHOST */ -#define SANY_OPT_DEFLOCAL 0x00100000 - -/* When only port specified default to IPv6 */ -#ifdef HAVE_INET6 -#define SANY_OPT_DEFINET6 0x00200000 -#endif - -int sock_any_ntop(const struct sockaddr_any* any, char* addr, size_t addrlen, int opts); - -/* Don't print or compare the port */ -#define SANY_OPT_NOPORT 0x01000000 - -int sock_any_cmp(const struct sockaddr_any* a1, const struct sockaddr_any* a2, int opts); - -#endif /* __SOCK_ANY_H__ */ diff --git a/common/spio.c b/common/spio.c deleted file mode 100644 index f2198c0..0000000 --- a/common/spio.c +++ /dev/null @@ -1,638 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - */ - -/* - * select() and stdio are basically mutually exclusive. - * Hence all of this code to try to get some buffering - * along with select IO multiplexing. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "compat.h" -#include "usuals.h" -#include "sock_any.h" -#include "stringx.h" -#include "sppriv.h" - -#define MAX_LOG_LINE 79 -#define GET_IO_NAME(io) ((io)->name ? (io)->name : "??? ") -#define HAS_EXTRA(io) ((io)->_ln > 0) - -static void close_raw(int* fd) -{ - ASSERT(fd); - shutdown(*fd, SHUT_RDWR); - close(*fd); - *fd = -1; -} - -static void log_io_data(spctx_t* ctx, spio_t* io, const char* data, int read) -{ - char buf[MAX_LOG_LINE + 1]; - int pos, len; - - ASSERT(ctx && io && data); - - for(;;) - { - data += strspn(data, "\r\n"); - - if(!*data) - break; - - pos = strcspn(data, "\r\n"); - - len = pos < MAX_LOG_LINE ? pos : MAX_LOG_LINE; - memcpy(buf, data, len); - buf[len] = 0; - - sp_messagex(ctx, LOG_DEBUG, "%s%s%s", GET_IO_NAME(io), - read ? " < " : " > ", buf); - - data += pos; - } -} - -void spio_init(spio_t* io, const char* name) -{ - ASSERT(io && name); - memset(io, 0, sizeof(*io)); - io->name = name; - io->fd = -1; -} - -void spio_attach(spctx_t* ctx, spio_t* io, int fd, struct sockaddr_any* peer) -{ - struct sockaddr_any peeraddr; - struct sockaddr_any locaddr; - - io->fd = fd; - - /* Get the address on which we accepted the connection */ - memset(&locaddr, 0, sizeof(locaddr)); - SANY_LEN(locaddr) = sizeof(locaddr); - - if(getsockname(fd, &SANY_ADDR(locaddr), &SANY_LEN(locaddr)) == -1 || - sock_any_ntop(&locaddr, io->localname, MAXPATHLEN, SANY_OPT_NOPORT) == -1) - { - if (errno != EAFNOSUPPORT) - sp_message(ctx, LOG_WARNING, "%s: couldn't get socket address", GET_IO_NAME(io)); - strlcpy(io->localname, "UNKNOWN", MAXPATHLEN); - } - - /* If the caller doesn't want the peer then use our own */ - if (peer == NULL) - peer = &peeraddr; - - memset(peer, 0, sizeof(*peer)); - SANY_LEN(*peer) = sizeof(*peer); - - if(getpeername(fd, &SANY_ADDR(*peer), &SANY_LEN(*peer)) == -1 || - sock_any_ntop(peer, io->peername, MAXPATHLEN, SANY_OPT_NOPORT) == -1) - { - if (errno != EAFNOSUPPORT) - sp_message(ctx, LOG_WARNING, "%s: couldn't get peer address", GET_IO_NAME(io)); - strlcpy(io->peername, "UNKNOWN", MAXPATHLEN); - } - - /* As a double check */ - io->line[0] = 0; - io->_nx = NULL; - io->_ln = 0; -} - -int spio_connect(spctx_t* ctx, spio_t* io, const struct sockaddr_any* sany, - const char* addrname) -{ - int ret = 0; - int fd; - - ASSERT(ctx && io && sany && addrname); - ASSERT(io->fd == -1); - - if((fd = socket(SANY_TYPE(*sany), SOCK_STREAM, 0)) == -1) - RETURN(-1); - - if(setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &(g_state.timeout), sizeof(g_state.timeout)) == -1 || - setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &(g_state.timeout), sizeof(g_state.timeout)) == -1) - sp_messagex(ctx, LOG_DEBUG, "%s: couldn't set timeouts on connection", GET_IO_NAME(io)); - - fcntl(fd, F_SETFD, fcntl(fd, F_GETFD, 0) | FD_CLOEXEC); - - if(connect(fd, &SANY_ADDR(*sany), SANY_LEN(*sany)) == -1) - { - close_raw(&fd); - RETURN(-1); - } - - spio_attach(ctx, io, fd, NULL); - -cleanup: - if(ret < 0) - { - if(spio_valid(io)) - close_raw(&(io->fd)); - - sp_message(ctx, LOG_ERR, "%s: couldn't connect to: %s", GET_IO_NAME(io), addrname); - return -1; - } - - ASSERT(io->fd != -1); - sp_messagex(ctx, LOG_DEBUG, "%s connected to: %s", GET_IO_NAME(io), io->peername); - return 0; -} - -void spio_disconnect(spctx_t* ctx, spio_t* io) -{ - ASSERT(ctx && io); - - if(spio_valid(io)) - { - close_raw(&(io->fd)); - sp_messagex(ctx, LOG_DEBUG, "%s connection closed", GET_IO_NAME(io)); - } -} - -unsigned int spio_select(spctx_t* ctx, ...) -{ - fd_set mask; - spio_t* io; - int ret = 0; - int have = 0; - int i = 0; - va_list ap; - struct timeval timeout; - - ASSERT(ctx); - FD_ZERO(&mask); - - va_start(ap, ctx); - - while((io = va_arg(ap, spio_t*)) != NULL) - { - if(spio_valid(io)) - { - /* We can't handle more than 31 args */ - if(i > (sizeof(int) * 8) - 2) - break; - - /* Check if the buffer has something in it */ - if(HAS_EXTRA(io)) - ret |= (1 << i); - - /* Mark for select */ - FD_SET(io->fd, &mask); - have = 1; - } - - i++; - } - - va_end(ap); - - /* If any buffers had something present, then return */ - if(ret != 0) - return ret; - - /* No valid file descriptors */ - if(!have) - return ~0; - - for(;;) - { - /* Select can modify the timeout argument so we copy */ - memcpy(&timeout, &(g_state.timeout), sizeof(timeout)); - - /* Otherwise wait on more data */ - switch(select(FD_SETSIZE, &mask, NULL, NULL, &timeout)) - { - case 0: - sp_messagex(ctx, LOG_ERR, "network operation timed out"); - return ~0; - - case -1: - if(errno == EINTR) - { - if(!sp_is_quit()) - continue; - } - - else - sp_message(ctx, LOG_ERR, "couldn't select on sockets"); - - return ~0; - }; - - break; - } - - /* See what came in */ - i = 0; - - va_start(ap, ctx); - - while((io = va_arg(ap, spio_t*)) != NULL) - { - /* We can't handle more than 31 args */ - if(i > (sizeof(int) * 8) - 2) - break; - - /* We have data on the descriptor, which is an action */ - io->last_action = time(NULL); - - /* Check if the buffer has something in it */ - if(FD_ISSET(io->fd, &mask)) - ret |= (1 << i); - - i++; - } - - return ret; -} - -int read_raw(spctx_t* ctx, spio_t* io, int opts) -{ - int len, x, count; - char* at; - char* p; - - /* - * Just a refresher: - * - * _nx: Extra data read on last read. - * _ln: Length of that extra data. - * - * _nx should never be equal to line when entering this function. - * And _ln should always be less than a full buffer. - */ - - count = 0; - io->line[0] = 0; - - /* Remaining data in the buffer */ - if(io->_nx && io->_ln > 0) - { - ASSERT(!io->_nx || io->_nx > io->line); - ASSERT(io->_ln < SP_LINE_LENGTH); - ASSERT(io->_nx + io->_ln <= io->line + SP_LINE_LENGTH); - - /* Check for a return in the current buffer */ - if((p = (char*)memchr(io->_nx, '\n', io->_ln)) != NULL) - { - /* Move data to front */ - x = (p - io->_nx) + 1; - ASSERT(x > 0); - memmove(io->line, io->_nx, x); - - /* Null teriminate it */ - io->line[x] = 0; - - /* Do maintanence for next time around */ - io->_ln -= x; - io->_nx += x; - - /* A double check on the return value */ - count += x; - return count; - } - - /* Otherwise move all old data to front */ - memmove(io->line, io->_nx, io->_ln); - count += io->_ln; - - /* We always leave space for a null terminator */ - len = (SP_LINE_LENGTH - io->_ln) - 1; - at = io->line + io->_ln; - } - - /* No data at front just read straight in */ - else - { - /* We always leave space for a null terminator */ - len = SP_LINE_LENGTH - 1; - at = io->line; - } - - for(;;) - { - /* Read a block of data */ - ASSERT(io->fd != -1); - x = read(io->fd, at, sizeof(char) * len); - - if(x == -1) - { - if(errno == EINTR) - { - /* When the application is quiting */ - if(sp_is_quit()) - return -1; - - /* For any other signal we go again */ - continue; - } - - if(errno == ECONNRESET) /* Not usually a big deal so supresse the error */ - sp_messagex(ctx, LOG_DEBUG, "%s: connection disconnected by peer", GET_IO_NAME(io)); - else if(errno == EAGAIN) - sp_messagex(ctx, LOG_WARNING, "%s: network read operation timed out", GET_IO_NAME(io)); - else - sp_message(ctx, LOG_ERR, "%s: couldn't read data from socket", GET_IO_NAME(io)); - - /* - * The basic logic here is that if we've had a fatal error - * reading from the socket once then we shut it down as it's - * no good trying to read from again later. - */ - close_raw(&(io->fd)); - - return -1; - } - - /* End of data */ - else if(x == 0) - { - /* Maintenance for remaining data */ - io->_nx = NULL; - io->_ln = 0; - - return count; - } - - /* Read data which is a descriptor action */ - io->last_action = time(NULL); - - /* Check for a new line */ - p = (char*)memchr(at, '\n', x); - if(p != NULL) - { - p++; - count += (p - at); - - /* Insert the null terminator */ - len = x - (p - at); - memmove(p + 1, p, len); - *p = 0; - - /* Do maintenence for remaining data */ - io->_nx = p + 1; - io->_ln = len; - - return count; - } - - /* Move the buffer pointer along */ - at += x; - len -= x; - count += x; - - if(len <= 0) - { - /* Keep reading until we hit a new line */ - if(opts & SPIO_DISCARD) - { - /* - * K, basically the logic is that we're discarding - * data and the data will be screwed up. So overwriting - * some valid data in order to flush the line and - * keep the buffering simple is a price we pay gladly :) - */ - - ASSERT(128 < SP_LINE_LENGTH); - at = (io->line + SP_LINE_LENGTH) - 128; - len = 128; - - /* Go for next read */ - continue; - } - - io->_nx = NULL; - io->_ln = 0; - - /* Null terminate */ - io->line[SP_LINE_LENGTH] = 0; - - /* A double check on the return value */ - return count; - } - } -} - -int spio_read_line(spctx_t* ctx, spio_t* io, int opts) -{ - int x, l; - char* t; - - ASSERT(ctx && io); - - if(!spio_valid(io)) - { - sp_messagex(ctx, LOG_WARNING, "%s: tried to read from a closed connection", GET_IO_NAME(io)); - return 0; - } - - x = read_raw(ctx, io, opts); - - if(x > 0) - { - if(opts & SPIO_TRIM) - { - t = io->line; - - while(*t && isspace(*t)) - t++; - - /* Bump the entire line down */ - l = t - io->line; - memmove(io->line, t, (x + 1) - l); - x -= l; - - /* Now the end */ - t = io->line + x; - - while(t > io->line && isspace(*(t - 1))) - { - *(--t) = 0; - x--; - } - } - - if(!(opts & SPIO_QUIET)) - log_io_data(ctx, io, io->line, 1); - } - - return x; -} - -int spio_write_data(spctx_t* ctx, spio_t* io, const char* data) -{ - int len = strlen(data); - ASSERT(ctx && io && data); - - if(!spio_valid(io)) - { - sp_message(ctx, LOG_ERR, "%s: connection closed. can't write data", GET_IO_NAME(io)); - return -1; - } - - log_io_data(ctx, io, data, 0); - return spio_write_data_raw(ctx, io, (unsigned char*)data, len); -} - -int spio_write_dataf(struct spctx* ctx, spio_t* io, const char* fmt, ...) -{ - char buf[SP_LINE_LENGTH]; - va_list ap; - ASSERT(ctx && io && fmt); - - buf[0] = 0; - - va_start(ap, fmt); - vsnprintf(buf, SP_LINE_LENGTH, fmt, ap); - va_end(ap); - - buf[SP_LINE_LENGTH - 1] = 0; - - return spio_write_data(ctx, io, buf); -} - -int spio_write_data_raw(spctx_t* ctx, spio_t* io, const unsigned char* buf, int len) -{ - int r; - - ASSERT(ctx && io && buf); - - if(io->fd == -1) - return 0; - - io->last_action = time(NULL); - - while(len > 0) - { - r = write(io->fd, buf, len); - - if(r > 0) - { - buf += r; - len -= r; - } - - else if(r == -1) - { - if(errno == EINTR) - { - /* When the application is quiting */ - if(sp_is_quit()) - return -1; - - /* For any other signal we go again */ - continue; - } - - /* - * The basic logic here is that if we've had a fatal error - * writing to the socket once then we shut it down as it's - * no good trying to write to it again later. - */ - close_raw(&(io->fd)); - - if(errno == EAGAIN) - sp_messagex(ctx, LOG_WARNING, "%s: network write operation timed out", GET_IO_NAME(io)); - else - sp_message(ctx, LOG_ERR, "%s: couldn't write data to socket", GET_IO_NAME(io)); - - return -1; - } - } - - return 0; -} - -void spio_read_junk(spctx_t* ctx, spio_t* io) -{ - char buf[16]; - const char* t; - int said = 0; - int l; - - ASSERT(ctx); - ASSERT(io); - - /* Truncate any data in buffer */ - io->_ln = 0; - io->_nx = 0; - - if(!spio_valid(io)) - return; - - /* Make it non blocking */ - fcntl(io->fd, F_SETFL, fcntl(io->fd, F_GETFL, 0) | O_NONBLOCK); - - for(;;) - { - l = read(io->fd, buf, sizeof(buf) - 1); - if(l <= 0) - break; - - io->last_action = time(NULL); - - buf[l] = 0; - t = trim_start(buf); - - if(!said && *t) - { - sp_messagex(ctx, LOG_DEBUG, "%s: received junk data from daemon", GET_IO_NAME(io)); - said = 1; - } - } - - fcntl(io->fd, F_SETFL, fcntl(io->fd, F_GETFL, 0) & ~O_NONBLOCK); -} diff --git a/common/sppriv.h b/common/sppriv.h deleted file mode 100644 index a690f3c..0000000 --- a/common/sppriv.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef __SPPRIV_H__ -#define __SPPRIV_H__ - -#include "smtppass.h" - -typedef struct spstate -{ - /* Settings ------------------------------- */ - int debug_level; /* The level to print stuff to console */ - int max_threads; /* Maximum number of threads to process at once */ - struct timeval timeout; /* Timeout for communication */ - int keepalives; /* Send server keep alives at this interval */ - int transparent; /* Transparent proxying */ - int xclient; /* Send XFORWARD info */ - const char* directory; /* The temp directory */ - const char* user; /* User to run as */ - const char* pidfile; /* The pid file for daemon */ - const char* header; /* A header to include in the email */ - int header_prepend; /* Prepend the header or not */ - - struct sockaddr_any outaddr; /* The outgoing address */ - const char* outname; - struct sockaddr_any listenaddr; /* Address to listen on */ - const char* listenname; - - /* State --------------------------------- */ - const char* name; /* The name of the program */ - int quit; /* Quit the process */ - int daemonized; /* Whether process is daemonized or not */ - - /* Internal Use ------------------------- */ - char* _p; -} -spstate_t; - -extern spstate_t g_state; - -#endif /* __SPPRIV_H__ */ - diff --git a/common/stringx.c b/common/stringx.c deleted file mode 100644 index f3c788e..0000000 --- a/common/stringx.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#include - -#include -#include -#include -#include -#include - -#include "usuals.h" -#include "compat.h" -#include "stringx.h" - -/* ---------------------------------------------------------------------------------- - * Parsing - */ - -int is_first_word(const char* line, const char* word, int len) -{ - ASSERT(line); - ASSERT(word); - ASSERT(len > 0); - - while(*line && isspace(*line)) - line++; - - if(strncasecmp(line, word, len) != 0) - return 0; - - line += len; - return !*line || isspace(*line); -} - -int check_first_word(const char* line, const char* word, int len, char* delims) -{ - const char* t; - int found = 0; - - ASSERT(line); - ASSERT(word); - ASSERT(len > 0); - - t = line; - - while(*t && strchr(delims, *t)) - t++; - - if(strncasecmp(t, word, len) != 0) - return 0; - - t += len; - - while(*t && strchr(delims, *t)) - { - found = 1; - t++; - } - - return (!*t || found) ? t - line : 0; -} - -int is_last_word(const char* line, const char* word, int len) -{ - const char* t; - - ASSERT(line); - ASSERT(word); - ASSERT(len > 0); - - t = line + strlen(line); - - while(t > line && isspace(*(t - 1))) - --t; - - if(t - len < line) - return 0; - - return strncasecmp(t - len, word, len) == 0; -} - -int is_blank_line(const char* line) -{ - /* Small optimization */ - if(!*line) - return 1; - - while(*line && isspace(*line)) - line++; - - return *line == 0; -} - -char* trim_start(const char* data) -{ - while(*data && isspace(*data)) - ++data; - return (char*)data; -} - -char* trim_end(char* data) -{ - char* t = data + strlen(data); - - while(t > data && isspace(*(t - 1))) - { - t--; - *t = 0; - } - - return data; -} - -char* trim_space(char* data) -{ - data = (char*)trim_start(data); - return trim_end(data); -} - -/* String to bool helper function */ -int strtob(const char* str) -{ - if(strcasecmp(str, "0") == 0 || - strcasecmp(str, "no") == 0 || - strcasecmp(str, "false") == 0 || - strcasecmp(str, "f") == 0 || - strcasecmp(str, "off") == 0) - return 0; - - if(strcasecmp(str, "1") == 0 || - strcasecmp(str, "yes") == 0 || - strcasecmp(str, "true") == 0 || - strcasecmp(str, "t") == 0 || - strcasecmp(str, "on") == 0) - return 1; - - return -1; -} diff --git a/common/stringx.h b/common/stringx.h deleted file mode 100644 index deb8f4b..0000000 --- a/common/stringx.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef __STRINGX_H__ -#define __STRINGX_H__ - -int check_first_word(const char* line, const char* word, int len, char* delims); -int is_first_word(const char* line, const char* word, int len); -int is_last_word(const char* line, const char* word, int len); -int is_blank_line(const char* line); - -char* trim_start(const char* data); -char* trim_end(char* data); -char* trim_space(char* data); - -int strtob(const char* str); - -#endif /* __STRINGX_H__ */ diff --git a/common/usuals.h b/common/usuals.h deleted file mode 100644 index 99951d7..0000000 --- a/common/usuals.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (c) 2004, Nate Nielsen - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above - * copyright notice, this list of conditions and the - * following disclaimer. - * * Redistributions in binary form must reproduce the - * above copyright notice, this list of conditions and - * the following disclaimer in the documentation and/or - * other materials provided with the distribution. - * * The names of contributors to this software may not be - * used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF - * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - * - * CONTRIBUTORS - * Nate Nielsen - * - */ - -#ifndef __USUALS_H__ -#define __USUALS_H__ - -#include - -#include "config.h" - -#include -#include -#include -#include - -#include "compat.h" - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef max -#define max(a,b) (((a) > (b)) ? (a) : (b)) -#endif - -#ifndef min -#define min(a,b) (((a) < (b)) ? (a) : (b)) -#endif - -#define countof(x) (sizeof(x) / sizeof(x[0])) - -#ifdef _DEBUG - #include "assert.h" - #define ASSERT(x) assert(x) -#else - #define ASSERT(x) -#endif - -#define KL(s) ((sizeof(s) - 1) / sizeof(char)) -#define RETURN(x) { ret = (x); goto cleanup; } - - -#endif /* __USUALS_H__ */ -- cgit v1.2.3