From d05a04968e07f6a2084ceb747938dc7cc049cb5f Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Thu, 3 Mar 2011 15:50:56 +0100 Subject: The start of some documentation. --- doc/p11-kit-multiple-problem.xml | 92 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 doc/p11-kit-multiple-problem.xml (limited to 'doc/p11-kit-multiple-problem.xml') diff --git a/doc/p11-kit-multiple-problem.xml b/doc/p11-kit-multiple-problem.xml new file mode 100644 index 0000000..a1c19a7 --- /dev/null +++ b/doc/p11-kit-multiple-problem.xml @@ -0,0 +1,92 @@ + + + + Sharing PKCS#11 modules + +
+ Multiple consumers of PKCS#11 in a process + + As more and more applications and libraries use PKCS#11 we run + into a very basic problem. The PKCS#11 modules cannot be initialized and + finalized properly without coordination between the various consumers. + + + An example: An application might use GnuTLS for + TLS connections, and use libgcr for display of certificates. Both of + these want to load (and initialze) the same PKCS#11 modules. There are + many places where this situation occurs, including large applications + like Evolution which due to their dependencies end up using both NSS and + GnuTLS. + + Consumer A loads a PKCS#11 module and uses the module's + C_Initialize function to initialize it, which works as expected. + When consumer B initializes the module (also using C_Initialize), + the error code CKR_CRYPTOKI_ALREADY_INITIALIZED + is correctly returned. This is normal PKCS#11 specification + defined behavior for when a module is initalized twice in the + same process. If consumer B is aware of this situation they may + choose to ignore this error code. + + However when the consumer A is done with its use of the + PKCS#11 module it finalizes the module using the module's + C_Finalize function. This is expected of a well behaved PKCS#11 + consumer. This then causes errors and/or crashes for consumer B, + which cannot know that the module has now been finalized out + from underneath it. + + It is necessary for the two consumers to coordinate their + initialization and finalization in some fashion. In + p11-kit we provide this coordination in a + loosely coupled, backwards compatible, and flexible way. +
+ +
+ Solution: p11-kit + + p11-kit provides functions to + coordinate initialization and finalization of any PKCS#11 + module. A module may be initialized any number of times using + the p11_kit_initialize_module() function. The first time that + p11_kit_initialize_module() is called for a module, that module's + C_Initialize function is used. Later invocations for the same + module cause p11-kit to increment an internal initialization + count, rather than calling C_Initialize again. + + The p11_kit_finalize_module() is used to finalize a module. + Each time it is called it decrements the internal initialization + count for that module. When the internal initialization count + reaches zero, the module's C_Finalize function is called. + + This is done in a thread-safe manner. These functions can + be used on modules that the consumer loads themselves. +
+ +
+ Solution: proxy module + + When an application is aware of the fact that coordination + is necessary between multiple consumers of a PKCS#11 module, it + can link to p11-kit and use the functions there to provide + this coordination. + + However most current consumers of PKCS#11 are ignorant of + this problem, and do not link to p11-kit. In order to solve this + multiple initialization problem for all applications, + p11-kit provides a proxy compatibility + module. + + This proxy module acts like a normal PKCS#11 module, but + internally loads a preconfigured set of PKCS#11 modules and + coordinates their initialization and finalization. Each slot + in the configured modules is exposed as a slot of the + p11-kit proxy module. The proxy module is + then used as a normal PKCS#11 module would be. It can be loaded by + crypto libraries like NSS and behaves as expected. + + The proxy module bends the PKCS#11 rules slightly. It does + not return the CKR_CRYPTOKI_ALREADY_INITIALIZED + error code as specified in PKCS#11. However this is a small + price to pay for this compatibility. +
+ -- cgit v1.2.3