From 85aadabd85dd077ae396724b264f9c2bfa5357b0 Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Mon, 7 Aug 2006 16:59:41 +0000 Subject: Added manual pages --- doc/rrdbotd.8 | 154 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 154 insertions(+) create mode 100644 doc/rrdbotd.8 (limited to 'doc/rrdbotd.8') diff --git a/doc/rrdbotd.8 b/doc/rrdbotd.8 new file mode 100644 index 0000000..4ff8e5f --- /dev/null +++ b/doc/rrdbotd.8 @@ -0,0 +1,154 @@ +.\" +.\" Copyright (c) 2006, Nate Nielsen +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" +.\" * Redistributions of source code must retain the above +.\" copyright notice, this list of conditions and the +.\" following disclaimer. +.\" * Redistributions in binary form must reproduce the +.\" above copyright notice, this list of conditions and +.\" the following disclaimer in the documentation and/or +.\" other materials provided with the distribution. +.\" * The names of contributors to this software may not be +.\" used to endorse or promote products derived from this +.\" software without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +.\" "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +.\" COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +.\" OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF +.\" THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH +.\" DAMAGE. +.\" +.\" +.\" CONTRIBUTORS +.\" Nate Nielsen +.\" +.Dd August, 2006 +.Dt rrdbotd 8 +.Os rrdbot +.Sh NAME +.Nm rddbotd +.Nd an SNMP poller which writes to an round robin database +.Sh SYNOPSIS +.Nm +.Op Fl M +.Op Fl c Ar confdir +.Op Fl w Ar workdir +.Op Fl m Ar mibdir +.Op Fl d Ar debuglevel +.Op Fl p Ar pidfile +.Op Fl r Ar retries +.Op Fl t Ar timeout +.Nm +.Fl V +.Sh DESCRIPTION +.Nm +is an SNMP polling daemon which writes the polled values to an +.Xr rrdtool 1 +RRD database. An can poll many different SNMP sources in an efficient manner. +.Pp +The configuration (eg: SNMP sources, polling intervals) are located in files +in a directory, with one configuration file per RRD. The format of the +configuration files are described in: +.Xr rrdbot.conf 5 +.Sh OPTIONS +The options are as follows. +.Bl -tag -width Fl +.It Fl c Ar confdir +The directory in which configuration files are stored. See below for info +on the various file locations. +.It Fl d Ar debuglevel +Don't detach from the console and run as a daemon. In addition the +.Ar debuglevel +argument specifies what level of error messages to display. 0 being +the least, 4 the most. +.It Fl m Ar mibdir +The directory in which to look for MIB files. The default directory is +usually sufficient. +.It Fl M +Display MIB parsing warnings. +.It Fl p Ar pidfile +Specifies a location for the a process id file to be written to. This file +contains the process id of +.Nm +and can be used to stop the daemon. +.It Fl r Ar retries +The number of times to retry sending an SNMP packet. Defaults to 3 retries. +.It Fl t Ar timeout +The amount of time (in seconds) to wait for an SNMP response. Defaults to +5 seconds. +.It Fl V +Prints the version of +.Nm +and the locations of the configuration files, RRD files etc. +.It Fl w Ar workdir +The default directory where to look for RRD files. See below for info on +the various file locations. +.El +.Sh FILE LOCATIONS +To determine the default location for the configuration files and RRD files +run this command: +.Bd -literal -offset indent +# rrdbotd -V +.Ed +.Pp +The configuration files for SNMP pollers are laid out in a directory tree, +with one file per RRD. Subdirectories can be used to organize the +configuration files. The contents of the configuration files are described +in +.Xr rrdbot.conf 5 . +.Pp +By default the RRD files mirror the directory structure and names of the +configuration files, with an +.Pa .rrd +extension appended to the filename. +.Pp +For example if your configuration files are in a structure like the following: +.Bd -literal -offset indent +/usr/local/etc/rrdbot/ + gateways/ + gateway-load.conf + gateway-traffic.conf + temperature/ + inside-temperature.conf + outside-temperature.conf + machine-load.conf +.Ed +.Pp +Then the default RRD files would be in a similar directory structure: +.Bd -literal -offset indent +/var/db/rrdbot/ + gateways/ + gateway-load.conf.rrd + gateway-traffic.conf.rrd + temperature/ + inside-temperature.conf.rrd + outside-temperature.conf.rrd + machine-load.conf.rrd +.Ed +.Pp +The default location for an RRD file can be overridden by using the +.Ar rrd +option in the configuration file. +.Pp +You can use the +.Xr rrdbot-create 8 +tool to create the needed RRD files in the appropriate places. +.Sh SEE ALSO +.Xr rrdbot.conf 5 , +.Xr rrdbot-create 8 , +.Xr rrdbot-get 1 , +.Xr rrdtool 1 +.Sh AUTHOR +.An Nate Nielsen Aq nielsen@memberwebs.com -- cgit v1.2.3