From fc9ee15902d0dc811bb56d65179c93231f05403c Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Sat, 24 Oct 2009 16:34:22 +0000 Subject: Add more MIB files from FreeBSD and BSNMP --- mibs/BEGEMOT-BRIDGE-MIB.txt | 1166 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1166 insertions(+) create mode 100644 mibs/BEGEMOT-BRIDGE-MIB.txt (limited to 'mibs/BEGEMOT-BRIDGE-MIB.txt') diff --git a/mibs/BEGEMOT-BRIDGE-MIB.txt b/mibs/BEGEMOT-BRIDGE-MIB.txt new file mode 100644 index 0000000..a0c0e85 --- /dev/null +++ b/mibs/BEGEMOT-BRIDGE-MIB.txt @@ -0,0 +1,1166 @@ +-- +-- Copyright (C) 2006 Shteryana Shopova +-- All rights reserved. +-- +-- Redistribution and use in source and binary forms, with or without +-- modification, are permitted provided that the following conditions +-- are met: +-- 1. Redistributions of source code must retain the above copyright +-- notice, this list of conditions and the following disclaimer. +-- 2. Redistributions in binary form must reproduce the above copyright +-- notice, this list of conditions and the following disclaimer in the +-- documentation and/or other materials provided with the distribution. +-- +-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND +-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE +-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +-- SUCH DAMAGE. +-- +-- $FreeBSD: src/usr.sbin/bsnmpd/modules/snmp_bridge/BEGEMOT-BRIDGE-MIB.txt,v 1.3.10.1 2009/08/03 08:13:06 kensmith Exp $ +-- + +BEGEMOT-BRIDGE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Counter32, Integer32, TimeTicks, mib-2 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus + FROM SNMPv2-TC + BridgeId, Timeout + FROM BRIDGE-MIB + InterfaceIndex FROM IF-MIB + begemot + FROM BEGEMOT-MIB; + +begemotBridge MODULE-IDENTITY + LAST-UPDATED "200708060000Z" + ORGANIZATION "Sofia University St. Kliment Ohridski" + CONTACT-INFO + " Shteryana Shopova + + Postal: Faculty of Mathematics and Informatics + 5 James Bourchier Blvd. + 1164 Sofia + Bulgaria + + Fax: +359 2 687 180 + + E-Mail: syrinx@FreeBSD.org" + DESCRIPTION + "The Begemot MIB for managing bridge interfaces." + REVISION "200708060000Z" + DESCRIPTION + "Third revision adds begemotBridgeBasePortPrivate + object." + REVISION "200611210000Z" + DESCRIPTION + "Second revision adds support for monitoring RSTP + specific variables." + REVISION "200607270000Z" + DESCRIPTION + "Initial revision." + ::= { begemot 205 } + +-- ---------------------------------------------------------- -- +BridgeIfName ::= TEXTUAL-CONVENTION + DISPLAY-HINT "16a" + STATUS current + DESCRIPTION + "Name of a bridge interface." + SYNTAX OCTET STRING (SIZE(1..16)) + +BridgeIfNameOrEmpty ::= TEXTUAL-CONVENTION + DISPLAY-HINT "16a" + STATUS current + DESCRIPTION + "Name of a bridge interface." + SYNTAX OCTET STRING (SIZE(0..16)) + +BridgePortId ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1x.1x" + STATUS current + DESCRIPTION + "A port identifier that contains a bridge port's STP priority + in the first octet and the port number in the second octet." + SYNTAX OCTET STRING (SIZE(2)) + +-- ---------------------------------------------------------- -- +-- subtrees in the Begemot Bridge MIB +-- ---------------------------------------------------------- -- +begemotBridgeNotifications OBJECT IDENTIFIER ::= { begemotBridge 0 } + +begemotBridgeBase OBJECT IDENTIFIER ::= { begemotBridge 1 } + +begemotBridgeStp OBJECT IDENTIFIER ::= { begemotBridge 2 } + +begemotBridgeTp OBJECT IDENTIFIER ::= { begemotBridge 3 } + +begemotBridgePf OBJECT IDENTIFIER ::= { begemotBridge 4 } + +begemotBridgeConfigObjects OBJECT IDENTIFIER ::= { begemotBridge 5 } + +-- ---------------------------------------------------------- -- +-- the base Bridge interface table +-- ---------------------------------------------------------- -- + +begemotBridgeBaseTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains generic information for each + bridge interface on the managed device." + ::= { begemotBridgeBase 1 } + +begemotBridgeBaseEntry OBJECT-TYPE + SYNTAX BegemotBridgeBaseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information for the bridge interfaces on + the managed device." + INDEX { begemotBridgeBaseName } + ::= { begemotBridgeBaseTable 1 } + +BegemotBridgeBaseEntry ::= SEQUENCE { + begemotBridgeBaseName BridgeIfName, + begemotBridgeBaseAddress MacAddress, + begemotBridgeBaseNumPorts Integer32, + begemotBridgeBaseType INTEGER, + begemotBridgeBaseStatus RowStatus +} + +begemotBridgeBaseName OBJECT-TYPE + SYNTAX BridgeIfName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the bridge interface for which this + entry contains management information." + ::= { begemotBridgeBaseEntry 1 } + +begemotBridgeBaseAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The MAC address of the bridge interface." + ::= { begemotBridgeBaseEntry 2 } + +begemotBridgeBaseNumPorts OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ports, members of this bridge." + ::= { begemotBridgeBaseEntry 3 } + +begemotBridgeBaseType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + transparent-only(2), + sourceroute-only(3), + srt(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates what type of bridging this bridge can + perform." + ::= { begemotBridgeBaseEntry 4 } + +begemotBridgeBaseStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to create/destroy bridge interfaces on the + managed device." + ::= { begemotBridgeBaseEntry 5 } + +-- ---------------------------------------------------------- -- +-- the base Bridge ports table +-- ---------------------------------------------------------- -- + +begemotBridgeBasePortTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeBasePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing generic information about ports, + members of each bridge interface." + ::= { begemotBridgeBase 2 } + +begemotBridgeBasePortEntry OBJECT-TYPE + SYNTAX BegemotBridgeBasePortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information about a specific port, member of + a bridge interface." + INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex } + ::= { begemotBridgeBasePortTable 1 } + +BegemotBridgeBasePortEntry ::= SEQUENCE { + begemotBridgeBasePort Integer32, + begemotBridgeBasePortIfIndex InterfaceIndex, + begemotBridgeBaseSpanEnabled INTEGER, + begemotBridgeBasePortDelayExceededDiscards Counter32, + begemotBridgeBasePortMtuExceededDiscards Counter32, + begemotBridgeBasePortStatus RowStatus, + begemotBridgeBasePortPrivate TruthValue +} + +begemotBridgeBasePort OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system interface index of the interface corresponding + to this port." + ::= { begemotBridgeBasePortEntry 1 } + +begemotBridgeBasePortIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the instance of the ifIndex object, + defined in IF-MIB, for the interface corresponding + to this port." + ::= { begemotBridgeBasePortEntry 2 } + +begemotBridgeBaseSpanEnabled OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this objects reflects whether the port + is a span port on the specified bridge interface." + ::= { begemotBridgeBasePortEntry 3 } + +begemotBridgeBasePortDelayExceededDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames discarded by this port due + to excessive transit delay through the bridge." + ::= { begemotBridgeBasePortEntry 4 } + +begemotBridgeBasePortMtuExceededDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames discarded by this port due + to an excessive size." + ::= { begemotBridgeBasePortEntry 5 } + +begemotBridgeBasePortStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to control addition of member ports to or + removal of member ports from a specified bridge." + ::= { begemotBridgeBasePortEntry 6 } + +begemotBridgeBasePortPrivate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this objects reflects whether the port + has a PRIVATE flag set. A port with this flags set + can only communicate with ports not having the + PRIVATE flag set." + ::= { begemotBridgeBasePortEntry 7 } + +-- ---------------------------------------------------------- -- +-- the Bridge interface STP table +-- ---------------------------------------------------------- -- + +begemotBridgeStpTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeStpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains Spanning Tree Protocol information + for each bridge interface on the managed device." + ::= { begemotBridgeStp 1 } + +begemotBridgeStpEntry OBJECT-TYPE + SYNTAX BegemotBridgeStpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information about the Spanning Tree Protocol + operation on a bridge interface." + AUGMENTS { begemotBridgeBaseEntry } + ::= { begemotBridgeStpTable 1 } + +BegemotBridgeStpEntry ::= SEQUENCE { + begemotBridgeStpProtocolSpecification INTEGER, + begemotBridgeStpPriority Integer32, + begemotBridgeStpTimeSinceTopologyChange TimeTicks, + begemotBridgeStpTopChanges Counter32, + begemotBridgeStpDesignatedRoot BridgeId, + begemotBridgeStpRootCost Integer32, + begemotBridgeStpRootPort Integer32, + begemotBridgeStpMaxAge Timeout, + begemotBridgeStpHelloTime Timeout, + begemotBridgeStpHoldTime Integer32, + begemotBridgeStpForwardDelay Timeout, + begemotBridgeStpBridgeMaxAge Timeout, + begemotBridgeStpBridgeHelloTime Timeout, + begemotBridgeStpBridgeForwardDelay Timeout, + begemotBridgeStpVersion INTEGER, + begemotBridgeStpTxHoldCount Integer32 +} + +begemotBridgeStpProtocolSpecification OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + decLb100(2), + ieee8021d(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Spanning Tree Protocol version being run on the + bridge interface. The value 'decLb100(2)' indicates the + DEC LANbridge 100 Spanning Tree protocol, 'ieee8021d(3)' + indicates the bridge is running IEEE 802.1D STP + implementation." + ::= { begemotBridgeStpEntry 1 } + +begemotBridgeStpPriority OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The priority value of the bridge interface forming the + first two octets of the bridge identifier. Acceptable + values are 0-61440, in steps of 4096." + ::= { begemotBridgeStpEntry 2 } + +begemotBridgeStpTimeSinceTopologyChange OBJECT-TYPE + SYNTAX TimeTicks + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time (in hundreds of a second) since a topology change + was last detected by this bridge." + ::= { begemotBridgeStpEntry 3 } + +begemotBridgeStpTopChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times a topology change was detected by the + bridge interface since the management entity was initialized + or reset." + ::= { begemotBridgeStpEntry 4 } + +begemotBridgeStpDesignatedRoot OBJECT-TYPE + SYNTAX BridgeId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The bridge identifier of the root of the spanning tree as + calculated by the Spanning Tree Protocol." + ::= { begemotBridgeStpEntry 5 } + +begemotBridgeStpRootCost OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The cost of the path from this bridge to the root bridge." + ::= { begemotBridgeStpEntry 6 } + +begemotBridgeStpRootPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the port that offers the lowest + cost path from this bridge to the root bridge of + the spanning tree. If this bridge is the root bridge, + this object shall have a value of zero." + ::= { begemotBridgeStpEntry 7 } + +begemotBridgeStpMaxAge OBJECT-TYPE + SYNTAX Timeout + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum age of Spanning Tree Protocol information + received from the network on any port, before that + information is discarded. This is the actual value that + the bridge is currently using." + ::= { begemotBridgeStpEntry 8 } + +begemotBridgeStpHelloTime OBJECT-TYPE + SYNTAX Timeout + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time between transmission of + Configuration BPDUs by this bridge on any port, + when it is the root of the spanning tree or is + trying to become so. This is the actual value that + this bridge is currently using." + ::= { begemotBridgeStpEntry 9 } + +begemotBridgeStpHoldTime OBJECT-TYPE + SYNTAX Integer32 + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This time value determines the interval length + during which no more than two Configuration BPDUs + shall be transmitted by this node, in units of + hundredths of a second." + ::= { begemotBridgeStpEntry 10 } + +begemotBridgeStpForwardDelay OBJECT-TYPE + SYNTAX Timeout + UNITS "centi-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value, measured in units of hundredths of a second + determines how long a port will stay consecutively in the + Listening and Learning states before transitioning to + Forwarding state. + This is the actual value currently used by the bridge + as opposed to begemotBridgeStpBridgeForwardDelay, which + is the value this and all bridges participating in the + spanning tree were to use, if this was the root bridge." + ::= { begemotBridgeStpEntry 11 } + +begemotBridgeStpBridgeMaxAge OBJECT-TYPE + SYNTAX Timeout (600..4000) + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value that all bridges participating in the + spanning tree would use for MaxAge if this bridge + was the root of the spanning tree." + ::= { begemotBridgeStpEntry 12 } + +begemotBridgeStpBridgeHelloTime OBJECT-TYPE + SYNTAX Timeout (100..1000) + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value that all bridges participating in the + spanning tree would use for HelloTime if this + bridge was the root of the spanning tree." + ::= { begemotBridgeStpEntry 13 } + +begemotBridgeStpBridgeForwardDelay OBJECT-TYPE + SYNTAX Timeout (400..3000) + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value that all bridges participating in the + spanning tree would use for ForwardDelay if this + bridge was the root of the spanning tree." + ::= { begemotBridgeStpEntry 14 } + +begemotBridgeStpVersion OBJECT-TYPE + SYNTAX INTEGER { + stpCompatible(0), + rstp(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The version of Spanning Tree Protocol the bridge is + currently running. The value 'stpCompatible(0)' + indicates the Spanning Tree Protocol specified in + IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid + Spanning Tree Protocol specified in IEEE 802.1w and + clause 17 of 802.1D-2004. The values are directly from + the IEEE standard. New values may be defined as future + versions of the protocol become available. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { rstp } + ::= { begemotBridgeStpEntry 15 } + +begemotBridgeStpTxHoldCount OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value used by the Port Transmit state machine to limit + the maximum transmission rate of BPDUs on the bridge interface. + + The value of this object MUST be retained across + reinitializations of the management system." + DEFVAL { 3 } + ::= { begemotBridgeStpEntry 16 } + +-- ---------------------------------------------------------- -- +-- the Bridge STP ports table +-- ---------------------------------------------------------- -- + +begemotBridgeStpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeStpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing Spanning Tree Protocol information + about the members of each bridge interface." + ::= { begemotBridgeStp 2 } + +begemotBridgeStpPortEntry OBJECT-TYPE + SYNTAX BegemotBridgeStpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Spanning Tree Protocol information about + a specific member of a bridge interface." + INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex } + ::= { begemotBridgeStpPortTable 1 } + +BegemotBridgeStpPortEntry ::= SEQUENCE { + begemotBridgeStpPort Integer32, + begemotBridgeStpPortPriority Integer32, + begemotBridgeStpPortState INTEGER, + begemotBridgeStpPortEnable INTEGER, + begemotBridgeStpPortPathCost Integer32, + begemotBridgeStpPortDesignatedRoot BridgeId, + begemotBridgeStpPortDesignatedCost Integer32, + begemotBridgeStpPortDesignatedBridge BridgeId, + begemotBridgeStpPortDesignatedPort BridgePortId, + begemotBridgeStpPortForwardTransitions Counter32 +} + +begemotBridgeStpPort OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system interface index of the interface corresponding + to this port, for which the management entity has Spanning + Tree Protocol information." + ::= { begemotBridgeStpPortEntry 1 } + +begemotBridgeStpPortPriority OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The STP priority of this port that is contained in the first + octet of its Port Identifier. The second octet contains the + value of begemotBridgeStpPort." + ::= { begemotBridgeStpPortEntry 2 } + +begemotBridgeStpPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + blocking(2), + listening(3), + learning(4), + forwarding(5), + broken(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current state of the port as defined by the operation + of the Spanning Tree Protocol. If the Spanning Tree Protocol + is administratively disabled on the port, this object shall + have value disabled(1). A value of broken(6) does not correspond + to any legal state of a port, and if present should indicate + error in the operation of either the Spanning Tree Protocol + implementation running on the device or the management entity." + ::= { begemotBridgeStpPortEntry 3 } + +begemotBridgeStpPortEnable OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative Spanning Tree Protocol state of the + port - value of enabled(1) indicates that the port is + participating in the Spanning Tree Protocol operation." + ::= { begemotBridgeStpPortEntry 4 } + +begemotBridgeStpPortPathCost OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The contribution of the path through this port, when the port + is the Root Port, to the total cost of the path to the root + bridge for this bridge." + ::= { begemotBridgeStpPortEntry 5 } + +begemotBridgeStpPortDesignatedRoot OBJECT-TYPE + SYNTAX BridgeId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique Bridge Identifier of the bridge recorded as the + root in the Root Identifier parameter of Configuration BPDUs + transmitted by the Designated Bridge for the LAN to which + the port is attached." + ::= { begemotBridgeStpPortEntry 6 } + +begemotBridgeStpPortDesignatedCost OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For a Designated port, the path cost (equal to the Root + Path Cost of the bridge) offered to the LAN to which the + port is attached otherwise the cost of the path to the Root + offered by the Designated Port on the LAN to which this + Port is attached." + ::= { begemotBridgeStpPortEntry 7 } + +begemotBridgeStpPortDesignatedBridge OBJECT-TYPE + SYNTAX BridgeId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The unique Bridge Identifier of the bridge to which the + port belongs, in the case when the port is a designated + port, otherwise the bridge believed to be the Designated + Bridge for the LAN to which this port is attached." + ::= { begemotBridgeStpPortEntry 8 } + +begemotBridgeStpPortDesignatedPort OBJECT-TYPE + SYNTAX BridgePortId + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Port Identifier of the Bridge port, on the Designated + Bridge, through which the Designated Bridge transmits the + Configuration Message information stored by this port." + ::= { begemotBridgeStpPortEntry 9 } + +begemotBridgeStpPortForwardTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this port has transitioned + from the Learning state to the Forwarding state." + ::= { begemotBridgeStpPortEntry 10 } + +-- ---------------------------------------------------------- -- +-- the Bridge STP extended ports table +-- ---------------------------------------------------------- -- + +begemotBridgeStpExtPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeStpExtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains port-specific Rapid Spanning Tree + information for the bridge interface members." + ::= { begemotBridgeStp 3 } + +begemotBridgeStpExtPortEntry OBJECT-TYPE + SYNTAX BegemotBridgeStpExtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Rapid Spanning Tree information maintained by + each bridge interface member." + AUGMENTS { begemotBridgeStpPortEntry } + ::= { begemotBridgeStpExtPortTable 1 } + +BegemotBridgeStpExtPortEntry ::= SEQUENCE { + begemotBridgeStpPortProtocolMigration TruthValue, + begemotBridgeStpPortAdminEdgePort TruthValue, + begemotBridgeStpPortOperEdgePort TruthValue, + begemotBridgeStpPortAdminPointToPoint INTEGER, + begemotBridgeStpPortOperPointToPoint TruthValue, + begemotBridgeStpPortAdminPathCost Integer32 +} + +begemotBridgeStpPortProtocolMigration OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When operating in RSTP (version 2) mode, writing true(1) + to this object forces this port to transmit RSTP BPDUs. + Any other operation on this object has no effect and + it always returns false(2) when read." + ::= { begemotBridgeStpExtPortEntry 1 } + +begemotBridgeStpPortAdminEdgePort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative value of the Edge Port parameter. A + value of true(1) indicates that this port should be + assumed as an edge-port, and a value of false(2) indicates + that this port should be assumed as a non-edge-port. + Setting this object will also cause the corresponding + instance of begemotBridgeStpPortOperEdgePort to change to + the same value. Note that even when this object's value + is true, the value of the corresponding instance of + begemotBridgeStpPortOperEdgePort can be false if a BPDU + has been received. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { begemotBridgeStpExtPortEntry 2 } + +begemotBridgeStpPortOperEdgePort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational value of the Edge Port parameter. The + object is initialized to the value of the corresponding + instance of begemotBridgeStpPortAdminEdgePort. When the + corresponding instance of begemotBridgeStpPortAdminEdgePort + is set, this object will be changed as well. This object + will also be changed to false on reception of a BPDU." + ::= { begemotBridgeStpExtPortEntry 3 } + +begemotBridgeStpPortAdminPointToPoint OBJECT-TYPE + SYNTAX INTEGER { + forceTrue(0), + forceFalse(1), + auto(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative point-to-point status of the LAN segment + attached to this port, using the enumeration values of the + IEEE 802.1w clause. A value of forceTrue(0) indicates + that this port should always be treated as if it is + connected to a point-to-point link. A value of + forceFalse(1) indicates that this port should be treated as + having a shared media connection. A value of auto(2) + indicates that this port is considered to have a + point-to-point link if it is an Aggregator and all of its + members are aggregatable, or if the MAC entity + is configured for full duplex operation, either through + auto-negotiation or by management means. Manipulating this + object changes the underlying adminPortToPortMAC. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { begemotBridgeStpExtPortEntry 4 } + +begemotBridgeStpPortOperPointToPoint OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational point-to-point status of the LAN segment + attached to this port. It indicates whether a port is + considered to have a point-to-point connection. + If adminPointToPointMAC is set to auto(2), then the value + of operPointToPointMAC is determined in accordance with the + specific procedures defined for the MAC entity concerned, + as defined in IEEE 802.1w, clause 6.5. The value is + determined dynamically; that is, it is re-evaluated whenever + the value of adminPointToPointMAC changes, and whenever + the specific procedures defined for the MAC entity evaluates + a change in its point-to-point status." + ::= { begemotBridgeStpExtPortEntry 5 } + +begemotBridgeStpPortAdminPathCost OBJECT-TYPE + SYNTAX Integer32 (0..200000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administratively assigned value for the contribution + of this port to the path cost of paths toward the spanning + tree root. + + Writing a value of '0' assigns the automatically calculated + default Path Cost value to the port. If the default Path + Cost is being used, this object returns '0' when read. + + This complements the object begemotBridgeStpPortPathCost or + begemotBridgeStpPortPathCost32, which returns the operational + value of the path cost. + + The value of this object MUST be retained across + reinitializations of the management system." + ::= { begemotBridgeStpExtPortEntry 6 } + +-- ---------------------------------------------------------- -- +-- the Bridge interface Transparent bridging table +-- ---------------------------------------------------------- -- + +begemotBridgeTpTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeTpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information regarding transparent + bridging for each bridge interface on the managed device." + ::= { begemotBridgeTp 1 } + +begemotBridgeTpEntry OBJECT-TYPE + SYNTAX BegemotBridgeTpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information regarding transparent bridging + on a bridge interface." + AUGMENTS { begemotBridgeBaseEntry } + ::= { begemotBridgeTpTable 1 } + +BegemotBridgeTpEntry ::= SEQUENCE { + begemotBridgeTpLearnedEntryDiscards Counter32, + begemotBridgeTpAgingTime Integer32, + begemotBridgeTpMaxAddresses Integer32 +} + +begemotBridgeTpLearnedEntryDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of Forwarding Database entries that would + have been learnt, but have been discarded due to Forwarding + Address Table having reached it's maximum entries limit." + ::= { begemotBridgeTpEntry 1 } + +begemotBridgeTpAgingTime OBJECT-TYPE + SYNTAX Integer32 (10..1000000) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The timeout period in seconds before aging out + dynamically learnt forwarding entries." + ::= { begemotBridgeTpEntry 2 } + +begemotBridgeTpMaxAddresses OBJECT-TYPE + SYNTAX Integer32 (1..10000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of entires that this bridge can + learn in it's Forwarding Address Table and use for + making forwarding decisions." + ::= { begemotBridgeTpEntry 3 } + +-- ---------------------------------------------------------- -- +-- The Forwarding Database for Transparent Bridging interfaces +-- ---------------------------------------------------------- -- + +begemotBridgeTpFdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about unicast entries + for which the bridge interfaces have forwarding and/or + filtering information. This information is used by the + bridge interfaces to make forwarding decisions." + ::= { begemotBridgeTp 2 } + +begemotBridgeTpFdbEntry OBJECT-TYPE + SYNTAX BegemotBridgeTpFdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a specific unicast MAC address + for which the bridge interface has some forwarding + and/or filtering information." + INDEX { begemotBridgeBaseName, begemotBridgeTpFdbAddress } + ::= { begemotBridgeTpFdbTable 1 } + +BegemotBridgeTpFdbEntry ::= SEQUENCE { + begemotBridgeTpFdbAddress MacAddress, + begemotBridgeTpFdbPort Integer32, + begemotBridgeTpFdbStatus INTEGER +} + +begemotBridgeTpFdbAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unicast MAC address for which the bridge has which the + bridge interface has some forwarding and/or filtering + information." + ::= { begemotBridgeTpFdbEntry 1 } + +begemotBridgeTpFdbPort OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port number of the bridge port on which a frame having + a source address equal to the value of the corresponding + instance of begemotBridgeTpFdbAddress has been seen." + ::= { begemotBridgeTpFdbEntry 2 } + +begemotBridgeTpFdbStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + invalid(2), + learned(3), + self(4), + mgmt(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of this entry. The meanings of the + values are: + other(1) - none of the following. + invalid(2) - this entry is no longer valid (e.g., + it was learned but has since aged out), but has + not yet been flushed from the table. + learned(3) - the value of the corresponding instance + of begemotBridgeTpFdbPort was learned, and is being + used. + self(4) - the value of the corresponding instance of + begemotBridgeTpFdbAddress represents one of the + bridge's addresses. The corresponding instance of + begemotBridgeTpFdbPort indicates which of the bridge's + ports has this address. + mgmt(5) - the value of the corresponding instance of + begemotBridgeTpFdbAddress has been added to the + bridge's Forwarding Database by some management + means." + ::= { begemotBridgeTpFdbEntry 3 } + +-- ---------------------------------------------------------- -- +-- Ports table for Transparent Bridging interfaces +-- ---------------------------------------------------------- -- + +begemotBridgeTpPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF BegemotBridgeTpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains information about every bridge port, + member of a bridge interface, associated with the transparent + bridging function of the bridge." + ::= { begemotBridgeTp 3 } + +begemotBridgeTpPortEntry OBJECT-TYPE + SYNTAX BegemotBridgeTpPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information about every bridge port, member of a + bridge interface, associated with the bridge's transparent + bridging function." + INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex } + ::= { begemotBridgeTpPortTable 1 } + +BegemotBridgeTpPortEntry ::= SEQUENCE { + begemotBridgeTpPort Integer32, + begemotBridgeTpPortMaxInfo Integer32, + begemotBridgeTpPortInFrames Counter32, + begemotBridgeTpPortOutFrames Counter32, + begemotBridgeTpPortInDiscards Counter32 +} + +begemotBridgeTpPort OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system interface index of the port for which this entry + contains Transparent bridging management information." + ::= { begemotBridgeTpPortEntry 1 } + +begemotBridgeTpPortMaxInfo OBJECT-TYPE + SYNTAX Integer32 + UNITS "bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum size of the INFO (non-MAC) field that this port + will receive or transmit." + ::= { begemotBridgeTpPortEntry 2 } + +begemotBridgeTpPortInFrames OBJECT-TYPE + SYNTAX Counter32 + UNITS "frames" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames that have been received by this + port from its segment. Note that a frame received on the + interface corresponding to this port is only counted by + this object if and only if it is for a protocol being + processed by the local bridging function, including + bridge management frames." + ::= { begemotBridgeTpPortEntry 3 } + +begemotBridgeTpPortOutFrames OBJECT-TYPE + SYNTAX Counter32 + UNITS "frames" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of frames that have been transmitted by this + port to its segment. Note that a frame transmitted on + the interface corresponding to this port is only counted + by this object if and only if it is for a protocol being + processed by the local bridging function, including + bridge management frames." + ::= { begemotBridgeTpPortEntry 4 } + +begemotBridgeTpPortInDiscards OBJECT-TYPE + SYNTAX Counter32 + UNITS "frames" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Count of received valid frames that were discarded + (i.e., filtered) by the Forwarding Process." + ::= { begemotBridgeTpPortEntry 5 } + +-- ---------------------------------------------------------- -- +-- the begemotBridgePf objects +-- ---------------------------------------------------------- -- + +begemotBridgePfilStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates whether packet filtering by some firewall + package is enabled on the bridge interface." + ::= { begemotBridgePf 1 } + +begemotBridgePfilMembers OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A value of true(1) indicates that packet filtering is + enabled on both incoming and outgoing bridge member + interfaces." + ::= { begemotBridgePf 2 } + +begemotBridgePfilIpOnly OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This value controls the handling of non-IP packets which + are not passed on for further processing to a firewall + package. A value of false(0) indicates that all non-IP + Ethernet frames are passed unconditionally." + ::= { begemotBridgePf 3 } + +begemotBridgeLayer2PfStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This value indicates whether layer2 filtering by a + firewall package is enabled for bridge interfaces." + ::= { begemotBridgePf 4 } + +-- ---------------------------------------------------------- -- +-- the begemotBridgeConfigObjects objects +-- ---------------------------------------------------------- -- + +begemotBridgeDefaultBridgeIf OBJECT-TYPE + + SYNTAX BridgeIfNameOrEmpty + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The name of the bridge interface that will be managed + via objects in IETF BRIDGE-MIB (RFC4188). If the + object's value is set to an empty string, bridge interfaces + will only be managed via objects in this MIB module." + DEFVAL { "bridge0" } + ::= { begemotBridgeConfigObjects 1 } + +begemotBridgeDataUpdate OBJECT-TYPE + + SYNTAX Timeout (1..300) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum age in seconds of the cached data." + DEFVAL { 10 } + ::= { begemotBridgeConfigObjects 2 } + +begemotBridgeDataPoll OBJECT-TYPE + + SYNTAX Timeout (1..3600) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The polling rate of data when the module is idle." + DEFVAL { 300 } + ::= { begemotBridgeConfigObjects 3 } + +-- ---------------------------------------------------------- -- +-- Notifications for the Spanning Tree Protocol +-- ---------------------------------------------------------- -- + +begemotBridgeNewRoot NOTIFICATION-TYPE + OBJECTS { begemotBridgeBaseName } + STATUS current + DESCRIPTION + "The begemotBridgeNewRoot trap indicates that one of the + bridge interfaces on the sending agent's device has + become the new root of the spanning tree topology it is + participating in." + ::= { begemotBridgeNotifications 1 } + +begemotBridgeTopologyChange NOTIFICATION-TYPE + OBJECTS { begemotBridgeBaseName } + STATUS current + DESCRIPTION + "A begemotBridgeTopologyChange trap is send when a member + port on one of the bridge interfaces, monitored by the agent, + transitions from the Learning state to the Forwarding state, + or from the Forwarding state to the Blocking state. The trap + is not sent if a begemotBridgeNewRoot trap is sent for the + same transition." + ::= { begemotBridgeNotifications 2 } + +END -- cgit v1.2.3