From 8b45597a9a24925b3a62c4fe793661bfbc682bcc Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Sat, 28 Jan 2006 00:00:04 +0000 Subject: Add MIBS that we distribute with the app. --- mibs/IPV6-MIB.txt | 1443 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1443 insertions(+) create mode 100644 mibs/IPV6-MIB.txt (limited to 'mibs/IPV6-MIB.txt') diff --git a/mibs/IPV6-MIB.txt b/mibs/IPV6-MIB.txt new file mode 100644 index 0000000..6957af2 --- /dev/null +++ b/mibs/IPV6-MIB.txt @@ -0,0 +1,1443 @@ + IPV6-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + mib-2, Counter32, Unsigned32, Integer32, + Gauge32 FROM SNMPv2-SMI + DisplayString, PhysAddress, TruthValue, TimeStamp, + VariablePointer, RowPointer FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + Ipv6IfIndex, Ipv6Address, Ipv6AddressPrefix, + Ipv6AddressIfIdentifier, + Ipv6IfIndexOrZero FROM IPV6-TC; + + ipv6MIB MODULE-IDENTITY + LAST-UPDATED "9802052155Z" + ORGANIZATION "IETF IPv6 Working Group" + CONTACT-INFO + " Dimitry Haskin + + Postal: Bay Networks, Inc. + 660 Techology Park Drive. + Billerica, MA 01821 + + US + + Tel: +1-978-916-8124 + E-mail: dhaskin@baynetworks.com + + Steve Onishi + + Postal: Bay Networks, Inc. + 3 Federal Street + Billerica, MA 01821 + US + + Tel: +1-978-916-3816 + E-mail: sonishi@baynetworks.com" + DESCRIPTION + "The MIB module for entities implementing the IPv6 + protocol." + ::= { mib-2 55 } + + -- the IPv6 general group + + ipv6MIBObjects OBJECT IDENTIFIER ::= { ipv6MIB 1 } + + ipv6Forwarding OBJECT-TYPE + SYNTAX INTEGER { + forwarding(1), -- acting as a router + + -- NOT acting as + notForwarding(2) -- a router + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether this entity is acting + as an IPv6 router in respect to the forwarding of + datagrams received by, but not addressed to, this + entity. IPv6 routers forward datagrams. IPv6 + hosts do not (except those source-routed via the + host). + + Note that for some managed nodes, this object may + take on only a subset of the values possible. + Accordingly, it is appropriate for an agent to + return a `wrongValue' response if a management + station attempts to change this object to an + inappropriate value." + ::= { ipv6MIBObjects 1 } + + ipv6DefaultHopLimit OBJECT-TYPE + SYNTAX INTEGER(0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default value inserted into the Hop Limit + field of the IPv6 header of datagrams originated + at this entity, whenever a Hop Limit value is not + supplied by the transport layer protocol." + DEFVAL { 64 } + ::= { ipv6MIBObjects 2 } + +ipv6Interfaces OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 interfaces (regardless of + their current state) present on this system." + ::= { ipv6MIBObjects 3 } + +ipv6IfTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time of the last + insertion or removal of an entry in the + ipv6IfTable. If the number of entries has been + unchanged since the last re-initialization of + the local network management subsystem, then this + object contains a zero value." + ::= { ipv6MIBObjects 4 } + +-- the IPv6 Interfaces table + +ipv6IfTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 Interfaces table contains information + on the entity's internetwork-layer interfaces. + An IPv6 interface constitutes a logical network + layer attachment to the layer immediately below + + IPv6 including internet layer 'tunnels', such as + tunnels over IPv4 or IPv6 itself." + ::= { ipv6MIBObjects 5 } + + ipv6IfEntry OBJECT-TYPE + SYNTAX Ipv6IfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An interface entry containing objects + about a particular IPv6 interface." + INDEX { ipv6IfIndex } + ::= { ipv6IfTable 1 } + + Ipv6IfEntry ::= SEQUENCE { + ipv6IfIndex Ipv6IfIndex, + ipv6IfDescr DisplayString, + ipv6IfLowerLayer VariablePointer, + ipv6IfEffectiveMtu Unsigned32, + ipv6IfReasmMaxSize Unsigned32, + ipv6IfIdentifier Ipv6AddressIfIdentifier, + ipv6IfIdentifierLength INTEGER, + ipv6IfPhysicalAddress PhysAddress, + ipv6IfAdminStatus INTEGER, + ipv6IfOperStatus INTEGER, + ipv6IfLastChange TimeStamp + } + + ipv6IfIndex OBJECT-TYPE + SYNTAX Ipv6IfIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique non-zero value identifying + the particular IPv6 interface." + ::= { ipv6IfEntry 1 } + + ipv6IfDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A textual string containing information about the + interface. This string may be set by the network + management system." + ::= { ipv6IfEntry 2 } + + ipv6IfLowerLayer OBJECT-TYPE + SYNTAX VariablePointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the protocol layer over + which this network interface operates. If this + network interface operates over the data-link + layer, then the value of this object refers to an + instance of ifIndex [6]. If this network interface + operates over an IPv4 interface, the value of this + object refers to an instance of ipAdEntAddr [3]. + + If this network interface operates over another + IPv6 interface, the value of this object refers to + an instance of ipv6IfIndex. If this network + interface is not currently operating over an active + protocol layer, then the value of this object + should be set to the OBJECT ID { 0 0 }." + ::= { ipv6IfEntry 3 } + + ipv6IfEffectiveMtu OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of the largest IPv6 packet which can be + sent/received on the interface, specified in + octets." + ::= { ipv6IfEntry 4 } + + ipv6IfReasmMaxSize OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of the largest IPv6 datagram which this + entity can re-assemble from incoming IPv6 fragmented + datagrams received on this interface." + ::= { ipv6IfEntry 5 } + + ipv6IfIdentifier OBJECT-TYPE + SYNTAX Ipv6AddressIfIdentifier + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Interface Identifier for this interface that + + is (at least) unique on the link this interface is + attached to. The Interface Identifier is combined + with an address prefix to form an interface address. + + By default, the Interface Identifier is autoconfigured + according to the rules of the link type this + interface is attached to." + ::= { ipv6IfEntry 6 } + + ipv6IfIdentifierLength OBJECT-TYPE + SYNTAX INTEGER (0..64) + UNITS "bits" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The length of the Interface Identifier in bits." + ::= { ipv6IfEntry 7 } + + ipv6IfPhysicalAddress OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The interface's physical address. For example, for + an IPv6 interface attached to an 802.x link, this + object normally contains a MAC address. Note that + in some cases this address may differ from the + address of the interface's protocol sub-layer. The + interface's media-specific MIB must define the bit + and byte ordering and the format of the value of + this object. For interfaces which do not have such + an address (e.g., a serial line), this object should + contain an octet string of zero length." + ::= { ipv6IfEntry 8 } + +ipv6IfAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of the interface. When a managed + system initializes, all IPv6 interfaces start with + ipv6IfAdminStatus in the down(2) state. As a result + of either explicit management action or per + configuration information retained by the managed + + system, ipv6IfAdminStatus is then changed to + the up(1) state (or remains in the down(2) state)." + ::= { ipv6IfEntry 9 } + +ipv6IfOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + + down(2), + noIfIdentifier(3), -- no interface identifier + + -- status can not be + -- determined for some + unknown(4), -- reason + + -- some component is + notPresent(5) -- missing + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the interface. + The noIfIdentifier(3) state indicates that no valid + Interface Identifier is assigned to the interface. + This state usually indicates that the link-local + interface address failed Duplicate Address Detection. + If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus + should be down(2). If ipv6IfAdminStatus is changed + to up(1) then ipv6IfOperStatus should change to up(1) + if the interface is ready to transmit and receive + network traffic; it should remain in the down(2) or + noIfIdentifier(3) state if and only if there is a + fault that prevents it from going to the up(1) state; + it should remain in the notPresent(5) state if + the interface has missing (typically, lower layer) + components." + ::= { ipv6IfEntry 10 } + +ipv6IfLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time the interface + entered its current operational state. If the + current state was entered prior to the last + re-initialization of the local network management + + subsystem, then this object contains a zero + value." + ::= { ipv6IfEntry 11 } + + -- IPv6 Interface Statistics table + + ipv6IfStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6IfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPv6 interface traffic statistics." + ::= { ipv6MIBObjects 6 } + + ipv6IfStatsEntry OBJECT-TYPE + SYNTAX Ipv6IfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An interface statistics entry containing objects + at a particular IPv6 interface." + AUGMENTS { ipv6IfEntry } + ::= { ipv6IfStatsTable 1 } + + Ipv6IfStatsEntry ::= SEQUENCE { + ipv6IfStatsInReceives + Counter32, + ipv6IfStatsInHdrErrors + Counter32, + ipv6IfStatsInTooBigErrors + Counter32, + ipv6IfStatsInNoRoutes + Counter32, + ipv6IfStatsInAddrErrors + Counter32, + ipv6IfStatsInUnknownProtos + Counter32, + ipv6IfStatsInTruncatedPkts + Counter32, + ipv6IfStatsInDiscards + Counter32, + ipv6IfStatsInDelivers + Counter32, + ipv6IfStatsOutForwDatagrams + Counter32, + ipv6IfStatsOutRequests + Counter32, + ipv6IfStatsOutDiscards + + Counter32, + ipv6IfStatsOutFragOKs + Counter32, + ipv6IfStatsOutFragFails + Counter32, + ipv6IfStatsOutFragCreates + Counter32, + ipv6IfStatsReasmReqds + Counter32, + ipv6IfStatsReasmOKs + Counter32, + ipv6IfStatsReasmFails + Counter32, + ipv6IfStatsInMcastPkts + Counter32, + ipv6IfStatsOutMcastPkts + Counter32 + } + + ipv6IfStatsInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of input datagrams received by + the interface, including those received in error." + ::= { ipv6IfStatsEntry 1 } + + ipv6IfStatsInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams discarded due to + errors in their IPv6 headers, including version + number mismatch, other format errors, hop count + exceeded, errors discovered in processing their + IPv6 options, etc." + ::= { ipv6IfStatsEntry 2 } + + ipv6IfStatsInTooBigErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams that could not be + forwarded because their size exceeded the link MTU + of outgoing interface." + ::= { ipv6IfStatsEntry 3 } + + ipv6IfStatsInNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams discarded because no + route could be found to transmit them to their + destination." + ::= { ipv6IfStatsEntry 4 } + + ipv6IfStatsInAddrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams discarded because + the IPv6 address in their IPv6 header's destination + field was not a valid address to be received at + this entity. This count includes invalid + addresses (e.g., ::0) and unsupported addresses + (e.g., addresses with unallocated prefixes). For + entities which are not IPv6 routers and therefore + do not forward datagrams, this counter includes + datagrams discarded because the destination address + was not a local address." + ::= { ipv6IfStatsEntry 5 } + + ipv6IfStatsInUnknownProtos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of locally-addressed datagrams + received successfully but discarded because of an + unknown or unsupported protocol. This counter is + incremented at the interface to which these + datagrams were addressed which might not be + necessarily the input interface for some of + the datagrams." + ::= { ipv6IfStatsEntry 6 } + + ipv6IfStatsInTruncatedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams discarded because + datagram frame didn't carry enough data." + ::= { ipv6IfStatsEntry 7 } + + ipv6IfStatsInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IPv6 datagrams for which no + problems were encountered to prevent their + continued processing, but which were discarded + (e.g., for lack of buffer space). Note that this + counter does not include any datagrams discarded + while awaiting re-assembly." + ::= { ipv6IfStatsEntry 8 } + + ipv6IfStatsInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of datagrams successfully + delivered to IPv6 user-protocols (including ICMP). + This counter is incremented at the interface to + which these datagrams were addressed which might + not be necessarily the input interface for some of + the datagrams." + ::= { ipv6IfStatsEntry 9 } + + ipv6IfStatsOutForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output datagrams which this + entity received and forwarded to their final + destinations. In entities which do not act + as IPv6 routers, this counter will include + only those packets which were Source-Routed + via this entity, and the Source-Route + processing was successful. Note that for + a successfully forwarded datagram the counter + of the outgoing interface is incremented." + ::= { ipv6IfStatsEntry 10 } + + ipv6IfStatsOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IPv6 datagrams which local IPv6 + user-protocols (including ICMP) supplied to IPv6 in + requests for transmission. Note that this counter + does not include any datagrams counted in + ipv6IfStatsOutForwDatagrams." + ::= { ipv6IfStatsEntry 11 } + + ipv6IfStatsOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output IPv6 datagrams for which no + problem was encountered to prevent their + transmission to their destination, but which were + discarded (e.g., for lack of buffer space). Note + that this counter would include datagrams counted + in ipv6IfStatsOutForwDatagrams if any such packets + met this (discretionary) discard criterion." + ::= { ipv6IfStatsEntry 12 } + + ipv6IfStatsOutFragOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 datagrams that have been + successfully fragmented at this output interface." + ::= { ipv6IfStatsEntry 13 } + + ipv6IfStatsOutFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 datagrams that have been + discarded because they needed to be fragmented + at this output interface but could not be." + ::= { ipv6IfStatsEntry 14 } + + ipv6IfStatsOutFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output datagram fragments that have + been generated as a result of fragmentation at + this output interface." + ::= { ipv6IfStatsEntry 15 } + + ipv6IfStatsReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 fragments received which needed + to be reassembled at this interface. Note that this + counter is incremented at the interface to which + these fragments were addressed which might not + be necessarily the input interface for some of + the fragments." + ::= { ipv6IfStatsEntry 16 } + + ipv6IfStatsReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IPv6 datagrams successfully + reassembled. Note that this counter is incremented + at the interface to which these datagrams were + addressed which might not be necessarily the input + interface for some of the fragments." + ::= { ipv6IfStatsEntry 17 } + + ipv6IfStatsReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of failures detected by the IPv6 re- + assembly algorithm (for whatever reason: timed + out, errors, etc.). Note that this is not + necessarily a count of discarded IPv6 fragments + since some algorithms (notably the algorithm in + RFC 815) can lose track of the number of fragments + by combining them as they are received. + This counter is incremented at the interface to which + these fragments were addressed which might not be + necessarily the input interface for some of the + fragments." + ::= { ipv6IfStatsEntry 18 } + + ipv6IfStatsInMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of multicast packets received + by the interface" + ::= { ipv6IfStatsEntry 19 } + + ipv6IfStatsOutMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of multicast packets transmitted + by the interface" + ::= { ipv6IfStatsEntry 20 } + + -- Address Prefix table + + -- The IPv6 Address Prefix table contains information on + -- the entity's IPv6 Address Prefixes that are associated + -- with IPv6 interfaces. + + ipv6AddrPrefixTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6AddrPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of IPv6 address prefixes of + IPv6 interfaces." + ::= { ipv6MIBObjects 7 } + + ipv6AddrPrefixEntry OBJECT-TYPE + SYNTAX Ipv6AddrPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An interface entry containing objects of + a particular IPv6 address prefix." + INDEX { ipv6IfIndex, + ipv6AddrPrefix, + ipv6AddrPrefixLength } + ::= { ipv6AddrPrefixTable 1 } + + Ipv6AddrPrefixEntry ::= SEQUENCE { + + ipv6AddrPrefix Ipv6AddressPrefix, + ipv6AddrPrefixLength INTEGER (0..128), + ipv6AddrPrefixOnLinkFlag TruthValue, + ipv6AddrPrefixAutonomousFlag TruthValue, + ipv6AddrPrefixAdvPreferredLifetime Unsigned32, + ipv6AddrPrefixAdvValidLifetime Unsigned32 + } + + ipv6AddrPrefix OBJECT-TYPE + SYNTAX Ipv6AddressPrefix + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The prefix associated with the this interface." + ::= { ipv6AddrPrefixEntry 1 } + + ipv6AddrPrefixLength OBJECT-TYPE + SYNTAX INTEGER (0..128) + UNITS "bits" + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The length of the prefix (in bits)." + ::= { ipv6AddrPrefixEntry 2 } + + ipv6AddrPrefixOnLinkFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object has the value 'true(1)', if this + prefix can be used for on-link determination + and the value 'false(2)' otherwise." + ::= { ipv6AddrPrefixEntry 3 } + + ipv6AddrPrefixAutonomousFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Autonomous address configuration flag. When + true(1), indicates that this prefix can be used + for autonomous address configuration (i.e. can + be used to form a local interface address). + If false(2), it is not used to autoconfigure + a local interface address." + ::= { ipv6AddrPrefixEntry 4 } + + ipv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "It is the length of time in seconds that this + prefix will remain preferred, i.e. time until + deprecation. A value of 4,294,967,295 represents + infinity. + + The address generated from a deprecated prefix + should no longer be used as a source address in + new communications, but packets received on such + an interface are processed as expected." + ::= { ipv6AddrPrefixEntry 5 } + + ipv6AddrPrefixAdvValidLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "It is the length of time in seconds that this + prefix will remain valid, i.e. time until + invalidation. A value of 4,294,967,295 represents + infinity. + + The address generated from an invalidated prefix + should not appear as the destination or source + address of a packet." + ::= { ipv6AddrPrefixEntry 6 } + + -- the IPv6 Address table + + -- The IPv6 address table contains this node's IPv6 + -- addressing information. + + ipv6AddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6AddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of addressing information relevant to + this node's interface addresses." + ::= { ipv6MIBObjects 8 } + + ipv6AddrEntry OBJECT-TYPE + SYNTAX Ipv6AddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The addressing information for one of this + node's interface addresses." + INDEX { ipv6IfIndex, ipv6AddrAddress } + ::= { ipv6AddrTable 1 } + + Ipv6AddrEntry ::= + SEQUENCE { + ipv6AddrAddress Ipv6Address, + ipv6AddrPfxLength INTEGER, + ipv6AddrType INTEGER, + ipv6AddrAnycastFlag TruthValue, + ipv6AddrStatus INTEGER + } + + ipv6AddrAddress OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 address to which this entry's addressing + information pertains." + ::= { ipv6AddrEntry 1 } + + ipv6AddrPfxLength OBJECT-TYPE + SYNTAX INTEGER(0..128) + UNITS "bits" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The length of the prefix (in bits) associated with + the IPv6 address of this entry." + ::= { ipv6AddrEntry 2 } + + ipv6AddrType OBJECT-TYPE + SYNTAX INTEGER { + -- address has been formed + -- using stateless + stateless(1), -- autoconfiguration + + -- address has been acquired + -- by stateful means + -- (e.g. DHCPv6, manual + stateful(2), -- configuration) + + -- type can not be determined + unknown(3) -- for some reason. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of address. Note that 'stateless(1)' + refers to an address that was statelessly + autoconfigured; 'stateful(2)' refers to a address + which was acquired by via a stateful protocol + (e.g. DHCPv6, manual configuration)." + ::= { ipv6AddrEntry 3 } + + ipv6AddrAnycastFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object has the value 'true(1)', if this + address is an anycast address and the value + 'false(2)' otherwise." + ::= { ipv6AddrEntry 4 } + + ipv6AddrStatus OBJECT-TYPE + SYNTAX INTEGER { + preferred(1), + deprecated(2), + invalid(3), + inaccessible(4), + unknown(5) -- status can not be determined + -- for some reason. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Address status. The preferred(1) state indicates + that this is a valid address that can appear as + the destination or source address of a packet. + The deprecated(2) state indicates that this is + a valid but deprecated address that should no longer + be used as a source address in new communications, + but packets addressed to such an address are + processed as expected. The invalid(3) state indicates + that this is not valid address which should not + + appear as the destination or source address of + a packet. The inaccessible(4) state indicates that + the address is not accessible because the interface + to which this address is assigned is not operational." + ::= { ipv6AddrEntry 5 } + + -- IPv6 Routing objects + + ipv6RouteNumber OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current ipv6RouteTable entries. + This is primarily to avoid having to read + the table in order to determine this number." + ::= { ipv6MIBObjects 9 } + + ipv6DiscardedRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of routing entries which were chosen + to be discarded even though they are valid. One + possible reason for discarding such an entry could + be to free-up buffer space for other routing + entries." + ::= { ipv6MIBObjects 10 } + + -- IPv6 Routing table + + ipv6RouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6RouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPv6 Routing table. This table contains + an entry for each valid IPv6 unicast route + that can be used for packet forwarding + determination." + ::= { ipv6MIBObjects 11 } + + ipv6RouteEntry OBJECT-TYPE + SYNTAX Ipv6RouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A routing entry." + INDEX { ipv6RouteDest, + ipv6RoutePfxLength, + ipv6RouteIndex } + ::= { ipv6RouteTable 1 } + + Ipv6RouteEntry ::= SEQUENCE { + ipv6RouteDest Ipv6Address, + ipv6RoutePfxLength INTEGER, + ipv6RouteIndex Unsigned32, + ipv6RouteIfIndex Ipv6IfIndexOrZero, + ipv6RouteNextHop Ipv6Address, + ipv6RouteType INTEGER, + ipv6RouteProtocol INTEGER, + ipv6RoutePolicy Integer32, + ipv6RouteAge Unsigned32, + ipv6RouteNextHopRDI Unsigned32, + ipv6RouteMetric Unsigned32, + ipv6RouteWeight Unsigned32, + ipv6RouteInfo RowPointer, + ipv6RouteValid TruthValue + } + + ipv6RouteDest OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination IPv6 address of this route. + This object may not take a Multicast address + value." + ::= { ipv6RouteEntry 1 } + + ipv6RoutePfxLength OBJECT-TYPE + SYNTAX INTEGER(0..128) + UNITS "bits" + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the prefix length of the destination + address." + ::= { ipv6RouteEntry 2 } + + ipv6RouteIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The value which uniquely identifies the route + among the routes to the same network layer + destination. The way this value is chosen is + implementation specific but it must be unique for + ipv6RouteDest/ipv6RoutePfxLength pair and remain + constant for the life of the route." + ::= { ipv6RouteEntry 3 } + + ipv6RouteIfIndex OBJECT-TYPE + SYNTAX Ipv6IfIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index value which uniquely identifies the local + interface through which the next hop of this + route should be reached. The interface identified + by a particular value of this index is the same + interface as identified by the same value of + ipv6IfIndex. For routes of the discard type this + value can be zero." + ::= { ipv6RouteEntry 4 } + + ipv6RouteNextHop OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "On remote routes, the address of the next + system en route; otherwise, ::0 + ('00000000000000000000000000000000'H in ASN.1 + string representation)." + ::= { ipv6RouteEntry 5 } + + ipv6RouteType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + + -- an route indicating that + -- packets to destinations + -- matching this route are + discard(2), -- to be discarded + + -- route to directly + local(3), -- connected (sub-)network + + -- route to a remote + + remote(4) -- destination + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of route. Note that 'local(3)' refers + to a route for which the next hop is the final + destination; 'remote(4)' refers to a route for + which the next hop is not the final + destination; 'discard(2)' refers to a route + indicating that packets to destinations matching + this route are to be discarded (sometimes called + black-hole route)." + ::= { ipv6RouteEntry 6 } + + ipv6RouteProtocol OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + + -- non-protocol information, + -- e.g., manually configured + local(2), -- entries + + netmgmt(3), -- static route + + -- obtained via Neighbor + -- Discovery protocol, + ndisc(4), -- e.g., result of Redirect + + -- the following are all + -- dynamic routing protocols + rip(5), -- RIPng + ospf(6), -- Open Shortest Path First + bgp(7), -- Border Gateway Protocol + idrp(8), -- InterDomain Routing Protocol + igrp(9) -- InterGateway Routing Protocol + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The routing mechanism via which this route was + learned." + ::= { ipv6RouteEntry 7 } + + ipv6RoutePolicy OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The general set of conditions that would cause the + selection of one multipath route (set of next hops + for a given destination) is referred to as 'policy'. + Unless the mechanism indicated by ipv6RouteProtocol + specified otherwise, the policy specifier is the + 8-bit Traffic Class field of the IPv6 packet header + that is zero extended at the left to a 32-bit value. + + Protocols defining 'policy' otherwise must either + define a set of values which are valid for + this object or must implement an integer- + instanced policy table for which this object's + value acts as an index." + ::= { ipv6RouteEntry 8 } + + ipv6RouteAge OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of seconds since this route was last + updated or otherwise determined to be correct. + Note that no semantics of `too old' can be implied + except through knowledge of the routing protocol + by which the route was learned." + ::= { ipv6RouteEntry 9 } + + ipv6RouteNextHopRDI OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Routing Domain ID of the Next Hop. + The semantics of this object are determined by + the routing-protocol specified in the route's + ipv6RouteProtocol value. When this object is + unknown or not relevant its value should be set + to zero." + ::= { ipv6RouteEntry 10 } + + ipv6RouteMetric OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The routing metric for this route. The + semantics of this metric are determined by the + routing protocol specified in the route's + ipv6RouteProtocol value. When this is unknown + or not relevant to the protocol indicated by + ipv6RouteProtocol, the object value should be + set to its maximum value (4,294,967,295)." + ::= { ipv6RouteEntry 11 } + + ipv6RouteWeight OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system internal weight value for this route. + The semantics of this value are determined by + the implementation specific rules. Generally, + within routes with the same ipv6RoutePolicy value, + the lower the weight value the more preferred is + the route." + ::= { ipv6RouteEntry 12 } + + ipv6RouteInfo OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A reference to MIB definitions specific to the + particular routing protocol which is responsible + for this route, as determined by the value + specified in the route's ipv6RouteProto value. + If this information is not present, its value + should be set to the OBJECT ID { 0 0 }, + which is a syntactically valid object identifier, + and any implementation conforming to ASN.1 + and the Basic Encoding Rules must be able to + generate and recognize this value." + ::= { ipv6RouteEntry 13 } + + ipv6RouteValid OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to the value 'false(2)' has + the effect of invalidating the corresponding entry + in the ipv6RouteTable object. That is, it + effectively disassociates the destination + + identified with said entry from the route + identified with said entry. It is an + implementation-specific matter as to whether the + agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared + to receive tabular information from agents that + corresponds to entries not currently in use. + Proper interpretation of such entries requires + examination of the relevant ipv6RouteValid + object." + DEFVAL { true } + ::= { ipv6RouteEntry 14 } + + -- IPv6 Address Translation table + + ipv6NetToMediaTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6NetToMediaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 Address Translation table used for + mapping from IPv6 addresses to physical addresses. + + The IPv6 address translation table contain the + Ipv6Address to `physical' address equivalencies. + Some interfaces do not use translation tables + for determining address equivalencies; if all + interfaces are of this type, then the Address + Translation table is empty, i.e., has zero + entries." + ::= { ipv6MIBObjects 12 } + + ipv6NetToMediaEntry OBJECT-TYPE + SYNTAX Ipv6NetToMediaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains one IPv6 address to `physical' + address equivalence." + INDEX { ipv6IfIndex, + ipv6NetToMediaNetAddress } + ::= { ipv6NetToMediaTable 1 } + + Ipv6NetToMediaEntry ::= SEQUENCE { + ipv6NetToMediaNetAddress + Ipv6Address, + ipv6NetToMediaPhysAddress + + PhysAddress, + ipv6NetToMediaType + INTEGER, + ipv6IfNetToMediaState + INTEGER, + ipv6IfNetToMediaLastUpdated + TimeStamp, + ipv6NetToMediaValid + TruthValue + } + + ipv6NetToMediaNetAddress OBJECT-TYPE + SYNTAX Ipv6Address + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IPv6 Address corresponding to + the media-dependent `physical' address." + ::= { ipv6NetToMediaEntry 1 } + + ipv6NetToMediaPhysAddress OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The media-dependent `physical' address." + ::= { ipv6NetToMediaEntry 2 } + + ipv6NetToMediaType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + dynamic(2), -- dynamically resolved + static(3), -- statically configured + local(4) -- local interface + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the mapping. The 'dynamic(2)' type + indicates that the IPv6 address to physical + addresses mapping has been dynamically + resolved using the IPv6 Neighbor Discovery + protocol. The static(3)' types indicates that + the mapping has been statically configured. + The local(4) indicates that the mapping is + provided for an entity's own interface address." + ::= { ipv6NetToMediaEntry 3 } + +ipv6IfNetToMediaState OBJECT-TYPE + SYNTAX INTEGER { + reachable(1), -- confirmed reachability + + stale(2), -- unconfirmed reachability + + delay(3), -- waiting for reachability + -- confirmation before entering + -- the probe state + + probe(4), -- actively probing + + invalid(5), -- an invalidated mapping + + unknown(6) -- state can not be determined + -- for some reason. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Neighbor Unreachability Detection [8] state + for the interface when the address mapping in + this entry is used." + ::= { ipv6NetToMediaEntry 4 } + +ipv6IfNetToMediaLastUpdated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry + was last updated. If this entry was updated prior + to the last re-initialization of the local network + management subsystem, then this object contains + a zero value." + ::= { ipv6NetToMediaEntry 5 } + + ipv6NetToMediaValid OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to the value 'false(2)' has + the effect of invalidating the corresponding entry + in the ipv6NetToMediaTable. That is, it effectively + disassociates the interface identified with said + entry from the mapping identified with said entry. + It is an implementation-specific matter as to + + whether the agent removes an invalidated entry + from the table. Accordingly, management stations + must be prepared to receive tabular information + from agents that corresponds to entries not + currently in use. Proper interpretation of such + entries requires examination of the relevant + ipv6NetToMediaValid object." + DEFVAL { true } + ::= { ipv6NetToMediaEntry 6 } + +-- definition of IPv6-related notifications. +-- Note that we need ipv6NotificationPrefix with the 0 +-- sub-identifier to make this MIB to translate to +-- an SNMPv1 format in a reversible way. For example +-- it is needed for proxies that convert SNMPv1 traps +-- to SNMPv2 notifications without MIB knowledge. + +ipv6Notifications OBJECT IDENTIFIER + ::= { ipv6MIB 2 } +ipv6NotificationPrefix OBJECT IDENTIFIER + ::= { ipv6Notifications 0 } + +ipv6IfStateChange NOTIFICATION-TYPE + OBJECTS { + ipv6IfDescr, + ipv6IfOperStatus -- the new state of the If. + } + STATUS current + DESCRIPTION + "An ipv6IfStateChange notification signifies + that there has been a change in the state of + an ipv6 interface. This notification should + be generated when the interface's operational + status transitions to or from the up(1) state." + ::= { ipv6NotificationPrefix 1 } + +-- conformance information + +ipv6Conformance OBJECT IDENTIFIER ::= { ipv6MIB 3 } + +ipv6Compliances OBJECT IDENTIFIER ::= { ipv6Conformance 1 } +ipv6Groups OBJECT IDENTIFIER ::= { ipv6Conformance 2 } + +-- compliance statements + +ipv6Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities which + implement ipv6 MIB." + MODULE -- this module + MANDATORY-GROUPS { ipv6GeneralGroup, + ipv6NotificationGroup } + OBJECT ipv6Forwarding + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6DefaultHopLimit + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6IfDescr + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6IfIdentifier + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6IfIdentifierLength + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + + OBJECT ipv6IfAdminStatus + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6RouteValid + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + access to this object" + OBJECT ipv6NetToMediaValid + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write + + access to this object" + ::= { ipv6Compliances 1 } + +ipv6GeneralGroup OBJECT-GROUP + OBJECTS { ipv6Forwarding, + ipv6DefaultHopLimit, + ipv6Interfaces, + ipv6IfTableLastChange, + ipv6IfDescr, + ipv6IfLowerLayer, + ipv6IfEffectiveMtu, + ipv6IfReasmMaxSize, + ipv6IfIdentifier, + ipv6IfIdentifierLength, + ipv6IfPhysicalAddress, + ipv6IfAdminStatus, + ipv6IfOperStatus, + ipv6IfLastChange, + ipv6IfStatsInReceives, + ipv6IfStatsInHdrErrors, + ipv6IfStatsInTooBigErrors, + ipv6IfStatsInNoRoutes, + ipv6IfStatsInAddrErrors, + ipv6IfStatsInUnknownProtos, + ipv6IfStatsInTruncatedPkts, + ipv6IfStatsInDiscards, + ipv6IfStatsInDelivers, + ipv6IfStatsOutForwDatagrams, + ipv6IfStatsOutRequests, + ipv6IfStatsOutDiscards, + ipv6IfStatsOutFragOKs, + ipv6IfStatsOutFragFails, + ipv6IfStatsOutFragCreates, + ipv6IfStatsReasmReqds, + ipv6IfStatsReasmOKs, + ipv6IfStatsReasmFails, + ipv6IfStatsInMcastPkts, + ipv6IfStatsOutMcastPkts, + ipv6AddrPrefixOnLinkFlag, + ipv6AddrPrefixAutonomousFlag, + ipv6AddrPrefixAdvPreferredLifetime, + ipv6AddrPrefixAdvValidLifetime, + ipv6AddrPfxLength, + ipv6AddrType, + ipv6AddrAnycastFlag, + ipv6AddrStatus, + ipv6RouteNumber, + ipv6DiscardedRoutes, + ipv6RouteIfIndex, + ipv6RouteNextHop, + ipv6RouteType, + ipv6RouteProtocol, + ipv6RoutePolicy, + ipv6RouteAge, + ipv6RouteNextHopRDI, + ipv6RouteMetric, + ipv6RouteWeight, + ipv6RouteInfo, + ipv6RouteValid, + ipv6NetToMediaPhysAddress, + ipv6NetToMediaType, + ipv6IfNetToMediaState, + ipv6IfNetToMediaLastUpdated, + ipv6NetToMediaValid } + STATUS current + DESCRIPTION + "The IPv6 group of objects providing for basic + management of IPv6 entities." + ::= { ipv6Groups 1 } + +ipv6NotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { ipv6IfStateChange } + STATUS current + DESCRIPTION + "The notification that an IPv6 entity is required + to implement." + ::= { ipv6Groups 2 } + + END -- cgit v1.2.3