From 8b45597a9a24925b3a62c4fe793661bfbc682bcc Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Sat, 28 Jan 2006 00:00:04 +0000 Subject: Add MIBS that we distribute with the app. --- mibs/RFC1213-MIB.txt | 2613 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2613 insertions(+) create mode 100644 mibs/RFC1213-MIB.txt (limited to 'mibs/RFC1213-MIB.txt') diff --git a/mibs/RFC1213-MIB.txt b/mibs/RFC1213-MIB.txt new file mode 100644 index 0000000..408ccd7 --- /dev/null +++ b/mibs/RFC1213-MIB.txt @@ -0,0 +1,2613 @@ +RFC1213-MIB DEFINITIONS ::= BEGIN + +IMPORTS + mgmt, NetworkAddress, IpAddress, Counter, Gauge, + TimeTicks + FROM RFC1155-SMI + OBJECT-TYPE + FROM RFC-1212; + +-- This MIB module uses the extended OBJECT-TYPE macro as +-- defined in [14]; + +-- MIB-II (same prefix as MIB-I) + +mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } + +-- textual conventions + +DisplayString ::= + OCTET STRING +-- This data type is used to model textual information taken +-- from the NVT ASCII character set. By convention, objects +-- with this syntax are declared as having + +-- +-- SIZE (0..255) + +PhysAddress ::= + OCTET STRING +-- This data type is used to model media addresses. For many +-- types of media, this will be in a binary representation. +-- For example, an ethernet address would be represented as +-- a string of 6 octets. + +-- groups in MIB-II + +system OBJECT IDENTIFIER ::= { mib-2 1 } + +interfaces OBJECT IDENTIFIER ::= { mib-2 2 } + +at OBJECT IDENTIFIER ::= { mib-2 3 } + +ip OBJECT IDENTIFIER ::= { mib-2 4 } + +icmp OBJECT IDENTIFIER ::= { mib-2 5 } + +tcp OBJECT IDENTIFIER ::= { mib-2 6 } + +udp OBJECT IDENTIFIER ::= { mib-2 7 } + +egp OBJECT IDENTIFIER ::= { mib-2 8 } + +-- historical (some say hysterical) +-- cmot OBJECT IDENTIFIER ::= { mib-2 9 } + +transmission OBJECT IDENTIFIER ::= { mib-2 10 } + +snmp OBJECT IDENTIFIER ::= { mib-2 11 } + +-- the System group + +-- Implementation of the System group is mandatory for all +-- systems. If an agent is not configured to have a value +-- for any of these variables, a string of length 0 is +-- returned. + +sysDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual description of the entity. This value + should include the full name and version + identification of the system's hardware type, + software operating-system, and networking + software. It is mandatory that this only contain + printable ASCII characters." + ::= { system 1 } + +sysObjectID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The vendor's authoritative identification of the + network management subsystem contained in the + entity. This value is allocated within the SMI + enterprises subtree (1.3.6.1.4.1) and provides an + easy and unambiguous means for determining `what + kind of box' is being managed. For example, if + vendor `Flintstones, Inc.' was assigned the + subtree 1.3.6.1.4.1.4242, it could assign the + identifier 1.3.6.1.4.1.4242.1.1 to its `Fred + Router'." + ::= { system 2 } + +sysUpTime OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The time (in hundredths of a second) since the + network management portion of the system was last + re-initialized." + ::= { system 3 } + +sysContact OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The textual identification of the contact person + for this managed node, together with information + on how to contact this person." + ::= { system 4 } + +sysName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An administratively-assigned name for this + managed node. By convention, this is the node's + fully-qualified domain name." + ::= { system 5 } + +sysLocation OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The physical location of this node (e.g., + `telephone closet, 3rd floor')." + ::= { system 6 } + +sysServices OBJECT-TYPE + SYNTAX INTEGER (0..127) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A value which indicates the set of services that + this entity primarily offers. + + The value is a sum. This sum initially takes the + value zero, Then, for each layer, L, in the range + 1 through 7, that this node performs transactions + for, 2 raised to (L - 1) is added to the sum. For + example, a node which performs primarily routing + functions would have a value of 4 (2^(3-1)). In + contrast, a node which is a host offering + application services would have a value of 72 + (2^(4-1) + 2^(7-1)). Note that in the context of + the Internet suite of protocols, values should be + calculated accordingly: + + layer functionality + 1 physical (e.g., repeaters) + 2 datalink/subnetwork (e.g., bridges) + 3 internet (e.g., IP gateways) + 4 end-to-end (e.g., IP hosts) + 7 applications (e.g., mail relays) + + For systems including OSI protocols, layers 5 and + 6 may also be counted." + ::= { system 7 } + +-- the Interfaces group + +-- Implementation of the Interfaces group is mandatory for +-- all systems. + +ifNumber OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of network interfaces (regardless of + their current state) present on this system." + ::= { interfaces 1 } + +-- the Interfaces table + +-- The Interfaces table contains information on the entity's +-- interfaces. Each interface is thought of as being +-- attached to a `subnetwork'. Note that this term should +-- not be confused with `subnet' which refers to an +-- addressing partitioning scheme used in the Internet suite +-- of protocols. + +ifTable OBJECT-TYPE + SYNTAX SEQUENCE OF IfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of interface entries. The number of + entries is given by the value of ifNumber." + ::= { interfaces 2 } + +ifEntry OBJECT-TYPE + SYNTAX IfEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "An interface entry containing objects at the + subnetwork layer and below for a particular + interface." + INDEX { ifIndex } + ::= { ifTable 1 } + +IfEntry ::= + SEQUENCE { + ifIndex + INTEGER, + ifDescr + DisplayString, + ifType + INTEGER, + ifMtu + INTEGER, + ifSpeed + Gauge, + ifPhysAddress + PhysAddress, + ifAdminStatus + INTEGER, + ifOperStatus + INTEGER, + ifLastChange + TimeTicks, + ifInOctets + Counter, + ifInUcastPkts + Counter, + ifInNUcastPkts + Counter, + ifInDiscards + Counter, + ifInErrors + Counter, + ifInUnknownProtos + Counter, + ifOutOctets + Counter, + ifOutUcastPkts + Counter, + ifOutNUcastPkts + Counter, + ifOutDiscards + Counter, + ifOutErrors + Counter, + ifOutQLen + Gauge, + ifSpecific + OBJECT IDENTIFIER + } + +ifIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A unique value for each interface. Its value + ranges between 1 and the value of ifNumber. The + value for each interface must remain constant at + least from one re-initialization of the entity's + network management system to the next re- + initialization." + ::= { ifEntry 1 } + +ifDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A textual string containing information about the + interface. This string should include the name of + the manufacturer, the product name and the version + of the hardware interface." + ::= { ifEntry 2 } + +ifType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + regular1822(2), + hdh1822(3), + ddn-x25(4), + rfc877-x25(5), + ethernet-csmacd(6), + iso88023-csmacd(7), + iso88024-tokenBus(8), + iso88025-tokenRing(9), + iso88026-man(10), + starLan(11), + proteon-10Mbit(12), + proteon-80Mbit(13), + hyperchannel(14), + fddi(15), + lapb(16), + sdlc(17), + ds1(18), -- T-1 + e1(19), -- european equiv. of T-1 + basicISDN(20), + primaryISDN(21), -- proprietary serial + propPointToPointSerial(22), + ppp(23), + softwareLoopback(24), + eon(25), -- CLNP over IP [11] + ethernet-3Mbit(26), + nsip(27), -- XNS over IP + slip(28), -- generic SLIP + ultra(29), -- ULTRA technologies + ds3(30), -- T-3 + sip(31), -- SMDS + frame-relay(32) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The type of interface, distinguished according to + the physical/link protocol(s) immediately `below' + the network layer in the protocol stack." + ::= { ifEntry 3 } + +ifMtu OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size of the largest datagram which can be + sent/received on the interface, specified in + octets. For interfaces that are used for + transmitting network datagrams, this is the size + of the largest network datagram that can be sent + on the interface." + ::= { ifEntry 4 } + +ifSpeed OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "An estimate of the interface's current bandwidth + in bits per second. For interfaces which do not + vary in bandwidth or for those where no accurate + estimation can be made, this object should contain + the nominal bandwidth." + ::= { ifEntry 5 } + +ifPhysAddress OBJECT-TYPE + SYNTAX PhysAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The interface's address at the protocol layer + immediately `below' the network layer in the + protocol stack. For interfaces which do not have + + such an address (e.g., a serial line), this object + should contain an octet string of zero length." + ::= { ifEntry 6 } + +ifAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + down(2), + testing(3) -- in some test mode + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The desired state of the interface. The + testing(3) state indicates that no operational + packets can be passed." + ::= { ifEntry 7 } + +ifOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), -- ready to pass packets + down(2), + testing(3) -- in some test mode + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current operational state of the interface. + The testing(3) state indicates that no operational + packets can be passed." + ::= { ifEntry 8 } + +ifLastChange OBJECT-TYPE + SYNTAX TimeTicks + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of sysUpTime at the time the interface + entered its current operational state. If the + current state was entered prior to the last re- + initialization of the local network management + subsystem, then this object contains a zero + value." + ::= { ifEntry 9 } + +ifInOctets OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of octets received on the + interface, including framing characters." + ::= { ifEntry 10 } + +ifInUcastPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of subnetwork-unicast packets + delivered to a higher-layer protocol." + ::= { ifEntry 11 } + +ifInNUcastPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of non-unicast (i.e., subnetwork- + broadcast or subnetwork-multicast) packets + delivered to a higher-layer protocol." + ::= { ifEntry 12 } + +ifInDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of inbound packets which were chosen + to be discarded even though no errors had been + detected to prevent their being deliverable to a + higher-layer protocol. One possible reason for + discarding such a packet could be to free up + buffer space." + ::= { ifEntry 13 } + +ifInErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of inbound packets that contained + errors preventing them from being deliverable to a + higher-layer protocol." + ::= { ifEntry 14 } + +ifInUnknownProtos OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of packets received via the interface + which were discarded because of an unknown or + unsupported protocol." + ::= { ifEntry 15 } + +ifOutOctets OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of octets transmitted out of the + interface, including framing characters." + ::= { ifEntry 16 } + +ifOutUcastPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted to a + subnetwork-unicast address, including those that + were discarded or not sent." + ::= { ifEntry 17 } + +ifOutNUcastPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of packets that higher-level + protocols requested be transmitted to a non- + unicast (i.e., a subnetwork-broadcast or + subnetwork-multicast) address, including those + that were discarded or not sent." + ::= { ifEntry 18 } + +ifOutDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outbound packets which were chosen + + to be discarded even though no errors had been + detected to prevent their being transmitted. One + possible reason for discarding such a packet could + be to free up buffer space." + ::= { ifEntry 19 } + +ifOutErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of outbound packets that could not be + transmitted because of errors." + ::= { ifEntry 20 } + +ifOutQLen OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The length of the output packet queue (in + packets)." + ::= { ifEntry 21 } + +ifSpecific OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A reference to MIB definitions specific to the + particular media being used to realize the + interface. For example, if the interface is + realized by an ethernet, then the value of this + object refers to a document defining objects + specific to ethernet. If this information is not + present, its value should be set to the OBJECT + IDENTIFIER { 0 0 }, which is a syntatically valid + object identifier, and any conformant + implementation of ASN.1 and BER must be able to + generate and recognize this value." + ::= { ifEntry 22 } + +-- the Address Translation group + +-- Implementation of the Address Translation group is +-- mandatory for all systems. Note however that this group +-- is deprecated by MIB-II. That is, it is being included + +-- solely for compatibility with MIB-I nodes, and will most +-- likely be excluded from MIB-III nodes. From MIB-II and +-- onwards, each network protocol group contains its own +-- address translation tables. + +-- The Address Translation group contains one table which is +-- the union across all interfaces of the translation tables +-- for converting a NetworkAddress (e.g., an IP address) into +-- a subnetwork-specific address. For lack of a better term, +-- this document refers to such a subnetwork-specific address +-- as a `physical' address. + +-- Examples of such translation tables are: for broadcast +-- media where ARP is in use, the translation table is +-- equivalent to the ARP cache; or, on an X.25 network where +-- non-algorithmic translation to X.121 addresses is +-- required, the translation table contains the +-- NetworkAddress to X.121 address equivalences. + +atTable OBJECT-TYPE + SYNTAX SEQUENCE OF AtEntry + ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "The Address Translation tables contain the + NetworkAddress to `physical' address equivalences. + Some interfaces do not use translation tables for + determining address equivalences (e.g., DDN-X.25 + has an algorithmic method); if all interfaces are + of this type, then the Address Translation table + is empty, i.e., has zero entries." + ::= { at 1 } + +atEntry OBJECT-TYPE + SYNTAX AtEntry + ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Each entry contains one NetworkAddress to + `physical' address equivalence." + INDEX { atIfIndex, + atNetAddress } + ::= { atTable 1 } + +AtEntry ::= + SEQUENCE { + atIfIndex + INTEGER, + atPhysAddress + PhysAddress, + atNetAddress + NetworkAddress + } + +atIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS deprecated + DESCRIPTION + "The interface on which this entry's equivalence + is effective. The interface identified by a + particular value of this index is the same + interface as identified by the same value of + ifIndex." + ::= { atEntry 1 } + +atPhysAddress OBJECT-TYPE + SYNTAX PhysAddress + ACCESS read-write + STATUS deprecated + DESCRIPTION + "The media-dependent `physical' address. + + Setting this object to a null string (one of zero + length) has the effect of invaliding the + corresponding entry in the atTable object. That + is, it effectively dissasociates the interface + identified with said entry from the mapping + identified with said entry. It is an + implementation-specific matter as to whether the + agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared + to receive tabular information from agents that + corresponds to entries not currently in use. + Proper interpretation of such entries requires + examination of the relevant atPhysAddress object." + ::= { atEntry 2 } + +atNetAddress OBJECT-TYPE + SYNTAX NetworkAddress + ACCESS read-write + STATUS deprecated + DESCRIPTION + "The NetworkAddress (e.g., the IP address) + corresponding to the media-dependent `physical' + address." + ::= { atEntry 3 } + +-- the IP group + +-- Implementation of the IP group is mandatory for all +-- systems. + +ipForwarding OBJECT-TYPE + SYNTAX INTEGER { + forwarding(1), -- acting as a gateway + not-forwarding(2) -- NOT acting as a gateway + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The indication of whether this entity is acting + as an IP gateway in respect to the forwarding of + datagrams received by, but not addressed to, this + entity. IP gateways forward datagrams. IP hosts + do not (except those source-routed via the host). + + Note that for some managed nodes, this object may + take on only a subset of the values possible. + Accordingly, it is appropriate for an agent to + return a `badValue' response if a management + station attempts to change this object to an + inappropriate value." + ::= { ip 1 } + +ipDefaultTTL OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The default value inserted into the Time-To-Live + field of the IP header of datagrams originated at + this entity, whenever a TTL value is not supplied + by the transport layer protocol." + ::= { ip 2 } + +ipInReceives OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of input datagrams received from + interfaces, including those received in error." + ::= { ip 3 } + +ipInHdrErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input datagrams discarded due to + errors in their IP headers, including bad + checksums, version number mismatch, other format + errors, time-to-live exceeded, errors discovered + in processing their IP options, etc." + ::= { ip 4 } + +ipInAddrErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input datagrams discarded because + the IP address in their IP header's destination + field was not a valid address to be received at + this entity. This count includes invalid + addresses (e.g., 0.0.0.0) and addresses of + unsupported Classes (e.g., Class E). For entities + which are not IP Gateways and therefore do not + forward datagrams, this counter includes datagrams + discarded because the destination address was not + a local address." + ::= { ip 5 } + +ipForwDatagrams OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input datagrams for which this + entity was not their final IP destination, as a + result of which an attempt was made to find a + route to forward them to that final destination. + In entities which do not act as IP Gateways, this + counter will include only those packets which were + Source-Routed via this entity, and the Source- + Route option processing was successful." + ::= { ip 6 } + +ipInUnknownProtos OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of locally-addressed datagrams + received successfully but discarded because of an + unknown or unsupported protocol." + ::= { ip 7 } + +ipInDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of input IP datagrams for which no + problems were encountered to prevent their + continued processing, but which were discarded + (e.g., for lack of buffer space). Note that this + counter does not include any datagrams discarded + while awaiting re-assembly." + ::= { ip 8 } + +ipInDelivers OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of input datagrams successfully + delivered to IP user-protocols (including ICMP)." + ::= { ip 9 } + +ipOutRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of IP datagrams which local IP + user-protocols (including ICMP) supplied to IP in + requests for transmission. Note that this counter + does not include any datagrams counted in + ipForwDatagrams." + ::= { ip 10 } + +ipOutDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of output IP datagrams for which no + + problem was encountered to prevent their + transmission to their destination, but which were + discarded (e.g., for lack of buffer space). Note + that this counter would include datagrams counted + in ipForwDatagrams if any such packets met this + (discretionary) discard criterion." + ::= { ip 11 } + +ipOutNoRoutes OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP datagrams discarded because no + route could be found to transmit them to their + destination. Note that this counter includes any + packets counted in ipForwDatagrams which meet this + `no-route' criterion. Note that this includes any + datagarms which a host cannot route because all of + its default gateways are down." + ::= { ip 12 } + +ipReasmTimeout OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum number of seconds which received + fragments are held while they are awaiting + reassembly at this entity." + ::= { ip 13 } + +ipReasmReqds OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP fragments received which needed + to be reassembled at this entity." + ::= { ip 14 } + +ipReasmOKs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP datagrams successfully re- + assembled." + ::= { ip 15 } + +ipReasmFails OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of failures detected by the IP re- + assembly algorithm (for whatever reason: timed + out, errors, etc). Note that this is not + necessarily a count of discarded IP fragments + since some algorithms (notably the algorithm in + RFC 815) can lose track of the number of fragments + by combining them as they are received." + ::= { ip 16 } + +ipFragOKs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP datagrams that have been + successfully fragmented at this entity." + ::= { ip 17 } + +ipFragFails OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP datagrams that have been + discarded because they needed to be fragmented at + this entity but could not be, e.g., because their + Don't Fragment flag was set." + ::= { ip 18 } + +ipFragCreates OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of IP datagram fragments that have + been generated as a result of fragmentation at + this entity." + ::= { ip 19 } + +-- the IP address table + +-- The IP address table contains this entity's IP addressing +-- information. + +ipAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpAddrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The table of addressing information relevant to + this entity's IP addresses." + ::= { ip 20 } + +ipAddrEntry OBJECT-TYPE + SYNTAX IpAddrEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The addressing information for one of this + entity's IP addresses." + INDEX { ipAdEntAddr } + ::= { ipAddrTable 1 } + +IpAddrEntry ::= + SEQUENCE { + ipAdEntAddr + IpAddress, + ipAdEntIfIndex + INTEGER, + ipAdEntNetMask + IpAddress, + ipAdEntBcastAddr + INTEGER, + ipAdEntReasmMaxSize + INTEGER (0..65535) + } + +ipAdEntAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address to which this entry's addressing + information pertains." + ::= { ipAddrEntry 1 } + +ipAdEntIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index value which uniquely identifies the + interface to which this entry is applicable. The + interface identified by a particular value of this + index is the same interface as identified by the + same value of ifIndex." + ::= { ipAddrEntry 2 } + +ipAdEntNetMask OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The subnet mask associated with the IP address of + this entry. The value of the mask is an IP + address with all the network bits set to 1 and all + the hosts bits set to 0." + ::= { ipAddrEntry 3 } + +ipAdEntBcastAddr OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of the least-significant bit in the IP + broadcast address used for sending datagrams on + the (logical) interface associated with the IP + address of this entry. For example, when the + Internet standard all-ones broadcast address is + used, the value will be 1. This value applies to + both the subnet and network broadcasts addresses + used by the entity on this (logical) interface." + ::= { ipAddrEntry 4 } + +ipAdEntReasmMaxSize OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The size of the largest IP datagram which this + entity can re-assemble from incoming IP fragmented + datagrams received on this interface." + ::= { ipAddrEntry 5 } + +-- the IP routing table + +-- The IP routing table contains an entry for each route +-- presently known to this entity. + +ipRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpRouteEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This entity's IP Routing table." + ::= { ip 21 } + +ipRouteEntry OBJECT-TYPE + SYNTAX IpRouteEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A route to a particular destination." + INDEX { ipRouteDest } + ::= { ipRouteTable 1 } + +IpRouteEntry ::= + SEQUENCE { + ipRouteDest + IpAddress, + ipRouteIfIndex + INTEGER, + ipRouteMetric1 + INTEGER, + ipRouteMetric2 + INTEGER, + ipRouteMetric3 + INTEGER, + ipRouteMetric4 + INTEGER, + ipRouteNextHop + IpAddress, + ipRouteType + INTEGER, + ipRouteProto + INTEGER, + ipRouteAge + INTEGER, + ipRouteMask + IpAddress, + ipRouteMetric5 + INTEGER, + ipRouteInfo + OBJECT IDENTIFIER + } + +ipRouteDest OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The destination IP address of this route. An + entry with a value of 0.0.0.0 is considered a + default route. Multiple routes to a single + destination can appear in the table, but access to + such multiple entries is dependent on the table- + access mechanisms defined by the network + management protocol in use." + ::= { ipRouteEntry 1 } + +ipRouteIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The index value which uniquely identifies the + local interface through which the next hop of this + route should be reached. The interface identified + by a particular value of this index is the same + interface as identified by the same value of + ifIndex." + ::= { ipRouteEntry 2 } + +ipRouteMetric1 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The primary routing metric for this route. The + semantics of this metric are determined by the + routing-protocol specified in the route's + ipRouteProto value. If this metric is not used, + its value should be set to -1." + ::= { ipRouteEntry 3 } + +ipRouteMetric2 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the + routing-protocol specified in the route's + ipRouteProto value. If this metric is not used, + its value should be set to -1." + ::= { ipRouteEntry 4 } + +ipRouteMetric3 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the + routing-protocol specified in the route's + ipRouteProto value. If this metric is not used, + its value should be set to -1." + ::= { ipRouteEntry 5 } + +ipRouteMetric4 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the + routing-protocol specified in the route's + ipRouteProto value. If this metric is not used, + its value should be set to -1." + ::= { ipRouteEntry 6 } + +ipRouteNextHop OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IP address of the next hop of this route. + (In the case of a route bound to an interface + which is realized via a broadcast media, the value + of this field is the agent's IP address on that + interface.)" + ::= { ipRouteEntry 7 } + +ipRouteType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + + invalid(2), -- an invalidated route + + -- route to directly + direct(3), -- connected (sub-)network + + -- route to a non-local + indirect(4) -- host/network/sub-network + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of route. Note that the values + direct(3) and indirect(4) refer to the notion of + direct and indirect routing in the IP + architecture. + + Setting this object to the value invalid(2) has + the effect of invalidating the corresponding entry + in the ipRouteTable object. That is, it + effectively dissasociates the destination + identified with said entry from the route + identified with said entry. It is an + implementation-specific matter as to whether the + agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared + to receive tabular information from agents that + corresponds to entries not currently in use. + Proper interpretation of such entries requires + examination of the relevant ipRouteType object." + ::= { ipRouteEntry 8 } + +ipRouteProto OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + + -- non-protocol information, + -- e.g., manually configured + local(2), -- entries + + -- set via a network + netmgmt(3), -- management protocol + + -- obtained via ICMP, + icmp(4), -- e.g., Redirect + + -- the remaining values are + -- all gateway routing + -- protocols + egp(5), + ggp(6), + hello(7), + rip(8), + is-is(9), + es-is(10), + ciscoIgrp(11), + bbnSpfIgp(12), + ospf(13), + bgp(14) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The routing mechanism via which this route was + learned. Inclusion of values for gateway routing + protocols is not intended to imply that hosts + should support those protocols." + ::= { ipRouteEntry 9 } + +ipRouteAge OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The number of seconds since this route was last + updated or otherwise determined to be correct. + Note that no semantics of `too old' can be implied + except through knowledge of the routing protocol + by which the route was learned." + ::= { ipRouteEntry 10 } + +ipRouteMask OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicate the mask to be logical-ANDed with the + destination address before being compared to the + value in the ipRouteDest field. For those systems + that do not support arbitrary subnet masks, an + agent constructs the value of the ipRouteMask by + determining whether the value of the correspondent + ipRouteDest field belong to a class-A, B, or C + network, and then using one of: + + mask network + 255.0.0.0 class-A + 255.255.0.0 class-B + 255.255.255.0 class-C + + If the value of the ipRouteDest is 0.0.0.0 (a + default route), then the mask value is also + 0.0.0.0. It should be noted that all IP routing + subsystems implicitly use this mechanism." + ::= { ipRouteEntry 11 } + +ipRouteMetric5 OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the + routing-protocol specified in the route's + ipRouteProto value. If this metric is not used, + its value should be set to -1." + ::= { ipRouteEntry 12 } + +ipRouteInfo OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A reference to MIB definitions specific to the + particular routing protocol which is responsible + for this route, as determined by the value + specified in the route's ipRouteProto value. If + this information is not present, its value should + be set to the OBJECT IDENTIFIER { 0 0 }, which is + a syntatically valid object identifier, and any + conformant implementation of ASN.1 and BER must be + able to generate and recognize this value." + ::= { ipRouteEntry 13 } + +-- the IP Address Translation table + +-- The IP address translation table contain the IpAddress to +-- `physical' address equivalences. Some interfaces do not +-- use translation tables for determining address +-- equivalences (e.g., DDN-X.25 has an algorithmic method); +-- if all interfaces are of this type, then the Address +-- Translation table is empty, i.e., has zero entries. + +ipNetToMediaTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpNetToMediaEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The IP Address Translation table used for mapping + from IP addresses to physical addresses." + ::= { ip 22 } + +ipNetToMediaEntry OBJECT-TYPE + SYNTAX IpNetToMediaEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry contains one IpAddress to `physical' + address equivalence." + INDEX { ipNetToMediaIfIndex, + ipNetToMediaNetAddress } + ::= { ipNetToMediaTable 1 } + +IpNetToMediaEntry ::= + SEQUENCE { + ipNetToMediaIfIndex + INTEGER, + ipNetToMediaPhysAddress + PhysAddress, + ipNetToMediaNetAddress + IpAddress, + ipNetToMediaType + INTEGER + } + +ipNetToMediaIfIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The interface on which this entry's equivalence + is effective. The interface identified by a + particular value of this index is the same + interface as identified by the same value of + ifIndex." + ::= { ipNetToMediaEntry 1 } + +ipNetToMediaPhysAddress OBJECT-TYPE + SYNTAX PhysAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The media-dependent `physical' address." + ::= { ipNetToMediaEntry 2 } + +ipNetToMediaNetAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The IpAddress corresponding to the media- + dependent `physical' address." + ::= { ipNetToMediaEntry 3 } + +ipNetToMediaType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + invalid(2), -- an invalidated mapping + dynamic(3), + static(4) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The type of mapping. + + Setting this object to the value invalid(2) has + the effect of invalidating the corresponding entry + in the ipNetToMediaTable. That is, it effectively + dissasociates the interface identified with said + entry from the mapping identified with said entry. + It is an implementation-specific matter as to + whether the agent removes an invalidated entry + from the table. Accordingly, management stations + must be prepared to receive tabular information + from agents that corresponds to entries not + currently in use. Proper interpretation of such + entries requires examination of the relevant + ipNetToMediaType object." + ::= { ipNetToMediaEntry 4 } + +-- additional IP objects + +ipRoutingDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of routing entries which were chosen + to be discarded even though they are valid. One + possible reason for discarding such an entry could + be to free-up buffer space for other routing + + entries." + ::= { ip 23 } + +-- the ICMP group + +-- Implementation of the ICMP group is mandatory for all +-- systems. + +icmpInMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of ICMP messages which the + entity received. Note that this counter includes + all those counted by icmpInErrors." + ::= { icmp 1 } + +icmpInErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP messages which the entity + received but determined as having ICMP-specific + errors (bad ICMP checksums, bad length, etc.)." + ::= { icmp 2 } + +icmpInDestUnreachs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Destination Unreachable + messages received." + ::= { icmp 3 } + +icmpInTimeExcds OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Time Exceeded messages + received." + ::= { icmp 4 } + +icmpInParmProbs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Parameter Problem messages + received." + ::= { icmp 5 } + +icmpInSrcQuenchs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Source Quench messages + received." + ::= { icmp 6 } + +icmpInRedirects OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Redirect messages received." + ::= { icmp 7 } + +icmpInEchos OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Echo (request) messages + received." + ::= { icmp 8 } + +icmpInEchoReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Echo Reply messages received." + ::= { icmp 9 } + +icmpInTimestamps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Timestamp (request) messages + received." + ::= { icmp 10 } + +icmpInTimestampReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Timestamp Reply messages + received." + ::= { icmp 11 } + +icmpInAddrMasks OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Address Mask Request messages + received." + ::= { icmp 12 } + +icmpInAddrMaskReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Address Mask Reply messages + received." + ::= { icmp 13 } + +icmpOutMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of ICMP messages which this + entity attempted to send. Note that this counter + includes all those counted by icmpOutErrors." + ::= { icmp 14 } + +icmpOutErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP messages which this entity did + not send due to problems discovered within ICMP + + such as a lack of buffers. This value should not + include errors discovered outside the ICMP layer + such as the inability of IP to route the resultant + datagram. In some implementations there may be no + types of error which contribute to this counter's + value." + ::= { icmp 15 } + +icmpOutDestUnreachs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Destination Unreachable + messages sent." + ::= { icmp 16 } + +icmpOutTimeExcds OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Time Exceeded messages sent." + ::= { icmp 17 } + +icmpOutParmProbs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Parameter Problem messages + sent." + ::= { icmp 18 } + +icmpOutSrcQuenchs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Source Quench messages sent." + ::= { icmp 19 } + +icmpOutRedirects OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Redirect messages sent. For a + + host, this object will always be zero, since hosts + do not send redirects." + ::= { icmp 20 } + +icmpOutEchos OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Echo (request) messages sent." + ::= { icmp 21 } + +icmpOutEchoReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Echo Reply messages sent." + ::= { icmp 22 } + +icmpOutTimestamps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Timestamp (request) messages + sent." + ::= { icmp 23 } + +icmpOutTimestampReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Timestamp Reply messages + sent." + ::= { icmp 24 } + +icmpOutAddrMasks OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Address Mask Request messages + sent." + ::= { icmp 25 } + +icmpOutAddrMaskReps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ICMP Address Mask Reply messages + sent." + ::= { icmp 26 } + +-- the TCP group + +-- Implementation of the TCP group is mandatory for all +-- systems that implement the TCP. + +-- Note that instances of object types that represent +-- information about a particular TCP connection are +-- transient; they persist only as long as the connection +-- in question. + +tcpRtoAlgorithm OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + + constant(2), -- a constant rto + rsre(3), -- MIL-STD-1778, Appendix B + vanj(4) -- Van Jacobson's algorithm [10] + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The algorithm used to determine the timeout value + used for retransmitting unacknowledged octets." + ::= { tcp 1 } + +tcpRtoMin OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The minimum value permitted by a TCP + implementation for the retransmission timeout, + measured in milliseconds. More refined semantics + for objects of this type depend upon the algorithm + used to determine the retransmission timeout. In + particular, when the timeout algorithm is rsre(3), + an object of this type has the semantics of the + LBOUND quantity described in RFC 793." + ::= { tcp 2 } + +tcpRtoMax OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum value permitted by a TCP + implementation for the retransmission timeout, + measured in milliseconds. More refined semantics + for objects of this type depend upon the algorithm + used to determine the retransmission timeout. In + particular, when the timeout algorithm is rsre(3), + an object of this type has the semantics of the + UBOUND quantity described in RFC 793." + ::= { tcp 3 } + +tcpMaxConn OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The limit on the total number of TCP connections + the entity can support. In entities where the + maximum number of connections is dynamic, this + object should contain the value -1." + ::= { tcp 4 } + +tcpActiveOpens OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times TCP connections have made a + direct transition to the SYN-SENT state from the + CLOSED state." + ::= { tcp 5 } + +tcpPassiveOpens OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times TCP connections have made a + direct transition to the SYN-RCVD state from the + LISTEN state." + ::= { tcp 6 } + +tcpAttemptFails OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times TCP connections have made a + direct transition to the CLOSED state from either + the SYN-SENT state or the SYN-RCVD state, plus the + number of times TCP connections have made a direct + transition to the LISTEN state from the SYN-RCVD + state." + ::= { tcp 7 } + +tcpEstabResets OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of times TCP connections have made a + direct transition to the CLOSED state from either + the ESTABLISHED state or the CLOSE-WAIT state." + ::= { tcp 8 } + +tcpCurrEstab OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of TCP connections for which the + current state is either ESTABLISHED or CLOSE- + WAIT." + ::= { tcp 9 } + +tcpInSegs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of segments received, including + those received in error. This count includes + segments received on currently established + connections." + ::= { tcp 10 } + +tcpOutSegs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of segments sent, including + those on current connections but excluding those + containing only retransmitted octets." + ::= { tcp 11 } + +tcpRetransSegs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of segments retransmitted - that + is, the number of TCP segments transmitted + containing one or more previously transmitted + octets." + ::= { tcp 12 } + +-- the TCP Connection table + +-- The TCP connection table contains information about this +-- entity's existing TCP connections. + +tcpConnTable OBJECT-TYPE + SYNTAX SEQUENCE OF TcpConnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table containing TCP connection-specific + information." + ::= { tcp 13 } + +tcpConnEntry OBJECT-TYPE + SYNTAX TcpConnEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a particular current TCP + connection. An object of this type is transient, + in that it ceases to exist when (or soon after) + the connection makes the transition to the CLOSED + state." + INDEX { tcpConnLocalAddress, + tcpConnLocalPort, + tcpConnRemAddress, + tcpConnRemPort } + ::= { tcpConnTable 1 } + +TcpConnEntry ::= + SEQUENCE { + tcpConnState + INTEGER, + tcpConnLocalAddress + IpAddress, + tcpConnLocalPort + INTEGER (0..65535), + tcpConnRemAddress + IpAddress, + tcpConnRemPort + INTEGER (0..65535) + } + +tcpConnState OBJECT-TYPE + SYNTAX INTEGER { + closed(1), + listen(2), + synSent(3), + synReceived(4), + established(5), + finWait1(6), + finWait2(7), + closeWait(8), + lastAck(9), + closing(10), + timeWait(11), + deleteTCB(12) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The state of this TCP connection. + + The only value which may be set by a management + station is deleteTCB(12). Accordingly, it is + appropriate for an agent to return a `badValue' + response if a management station attempts to set + this object to any other value. + + If a management station sets this object to the + value deleteTCB(12), then this has the effect of + deleting the TCB (as defined in RFC 793) of the + corresponding connection on the managed node, + resulting in immediate termination of the + connection. + + As an implementation-specific option, a RST + + segment may be sent from the managed node to the + other TCP endpoint (note however that RST segments + are not sent reliably)." + ::= { tcpConnEntry 1 } + +tcpConnLocalAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The local IP address for this TCP connection. In + the case of a connection in the listen state which + is willing to accept connections for any IP + interface associated with the node, the value + 0.0.0.0 is used." + ::= { tcpConnEntry 2 } + +tcpConnLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The local port number for this TCP connection." + ::= { tcpConnEntry 3 } + +tcpConnRemAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The remote IP address for this TCP connection." + ::= { tcpConnEntry 4 } + +tcpConnRemPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The remote port number for this TCP connection." + ::= { tcpConnEntry 5 } + +-- additional TCP objects + +tcpInErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of segments received in error + (e.g., bad TCP checksums)." + ::= { tcp 14 } + +tcpOutRsts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of TCP segments sent containing the + RST flag." + ::= { tcp 15 } + +-- the UDP group + +-- Implementation of the UDP group is mandatory for all +-- systems which implement the UDP. + +udpInDatagrams OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of UDP datagrams delivered to + UDP users." + ::= { udp 1 } + +udpNoPorts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of received UDP datagrams for + which there was no application at the destination + port." + ::= { udp 2 } + +udpInErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of received UDP datagrams that could + not be delivered for reasons other than the lack + of an application at the destination port." + ::= { udp 3 } + +udpOutDatagrams OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of UDP datagrams sent from this + entity." + ::= { udp 4 } + +-- the UDP Listener table + +-- The UDP listener table contains information about this +-- entity's UDP end-points on which a local application is +-- currently accepting datagrams. + +udpTable OBJECT-TYPE + SYNTAX SEQUENCE OF UdpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table containing UDP listener information." + ::= { udp 5 } + +udpEntry OBJECT-TYPE + SYNTAX UdpEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about a particular current UDP + listener." + INDEX { udpLocalAddress, udpLocalPort } + ::= { udpTable 1 } + +UdpEntry ::= + SEQUENCE { + udpLocalAddress + IpAddress, + udpLocalPort + INTEGER (0..65535) + } + +udpLocalAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The local IP address for this UDP listener. In + + the case of a UDP listener which is willing to + accept datagrams for any IP interface associated + with the node, the value 0.0.0.0 is used." + ::= { udpEntry 1 } + +udpLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The local port number for this UDP listener." + ::= { udpEntry 2 } + +-- the EGP group + +-- Implementation of the EGP group is mandatory for all +-- systems which implement the EGP. + +egpInMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP messages received without + error." + ::= { egp 1 } + +egpInErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP messages received that proved + to be in error." + ::= { egp 2 } + +egpOutMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of locally generated EGP + messages." + ::= { egp 3 } + +egpOutErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of locally generated EGP messages not + sent due to resource limitations within an EGP + entity." + ::= { egp 4 } + +-- the EGP Neighbor table + +-- The EGP neighbor table contains information about this +-- entity's EGP neighbors. + +egpNeighTable OBJECT-TYPE + SYNTAX SEQUENCE OF EgpNeighEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The EGP neighbor table." + ::= { egp 5 } + +egpNeighEntry OBJECT-TYPE + SYNTAX EgpNeighEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information about this entity's relationship with + a particular EGP neighbor." + INDEX { egpNeighAddr } + ::= { egpNeighTable 1 } + +EgpNeighEntry ::= + SEQUENCE { + egpNeighState + INTEGER, + egpNeighAddr + IpAddress, + egpNeighAs + INTEGER, + egpNeighInMsgs + Counter, + egpNeighInErrs + Counter, + egpNeighOutMsgs + Counter, + egpNeighOutErrs + Counter, + egpNeighInErrMsgs + Counter, + egpNeighOutErrMsgs + Counter, + egpNeighStateUps + Counter, + egpNeighStateDowns + Counter, + egpNeighIntervalHello + INTEGER, + egpNeighIntervalPoll + INTEGER, + egpNeighMode + INTEGER, + egpNeighEventTrigger + INTEGER + } + +egpNeighState OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + acquisition(2), + down(3), + up(4), + cease(5) + } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The EGP state of the local system with respect to + this entry's EGP neighbor. Each EGP state is + represented by a value that is one greater than + the numerical value associated with said state in + RFC 904." + ::= { egpNeighEntry 1 } + +egpNeighAddr OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of this entry's EGP neighbor." + ::= { egpNeighEntry 2 } + +egpNeighAs OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The autonomous system of this EGP peer. Zero + should be specified if the autonomous system + number of the neighbor is not yet known." + ::= { egpNeighEntry 3 } + +egpNeighInMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP messages received without error + from this EGP peer." + ::= { egpNeighEntry 4 } + +egpNeighInErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP messages received from this EGP + peer that proved to be in error (e.g., bad EGP + checksum)." + ::= { egpNeighEntry 5 } + +egpNeighOutMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of locally generated EGP messages to + this EGP peer." + ::= { egpNeighEntry 6 } + +egpNeighOutErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of locally generated EGP messages not + sent to this EGP peer due to resource limitations + within an EGP entity." + ::= { egpNeighEntry 7 } + +egpNeighInErrMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP-defined error messages received + from this EGP peer." + ::= { egpNeighEntry 8 } + +egpNeighOutErrMsgs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP-defined error messages sent to + this EGP peer." + ::= { egpNeighEntry 9 } + +egpNeighStateUps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP state transitions to the UP + state with this EGP peer." + ::= { egpNeighEntry 10 } + +egpNeighStateDowns OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of EGP state transitions from the UP + state to any other state with this EGP peer." + ::= { egpNeighEntry 11 } + +egpNeighIntervalHello OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The interval between EGP Hello command + retransmissions (in hundredths of a second). This + represents the t1 timer as defined in RFC 904." + ::= { egpNeighEntry 12 } + +egpNeighIntervalPoll OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The interval between EGP poll command + + retransmissions (in hundredths of a second). This + represents the t3 timer as defined in RFC 904." + ::= { egpNeighEntry 13 } + +egpNeighMode OBJECT-TYPE + SYNTAX INTEGER { active(1), passive(2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The polling mode of this EGP entity, either + passive or active." + ::= { egpNeighEntry 14 } + +egpNeighEventTrigger OBJECT-TYPE + SYNTAX INTEGER { start(1), stop(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A control variable used to trigger operator- + initiated Start and Stop events. When read, this + variable always returns the most recent value that + egpNeighEventTrigger was set to. If it has not + been set since the last initialization of the + network management subsystem on the node, it + returns a value of `stop'. + + When set, this variable causes a Start or Stop + event on the specified neighbor, as specified on + pages 8-10 of RFC 904. Briefly, a Start event + causes an Idle peer to begin neighbor acquisition + and a non-Idle peer to reinitiate neighbor + acquisition. A stop event causes a non-Idle peer + to return to the Idle state until a Start event + occurs, either via egpNeighEventTrigger or + otherwise." + ::= { egpNeighEntry 15 } + +-- additional EGP objects + +egpAs OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The autonomous system number of this EGP entity." + ::= { egp 6 } + +-- the Transmission group + +-- Based on the transmission media underlying each interface +-- on a system, the corresponding portion of the Transmission +-- group is mandatory for that system. + +-- When Internet-standard definitions for managing +-- transmission media are defined, the transmission group is +-- used to provide a prefix for the names of those objects. + +-- Typically, such definitions reside in the experimental +-- portion of the MIB until they are "proven", then as a +-- part of the Internet standardization process, the +-- definitions are accordingly elevated and a new object +-- identifier, under the transmission group is defined. By +-- convention, the name assigned is: +-- +-- type OBJECT IDENTIFIER ::= { transmission number } +-- +-- where "type" is the symbolic value used for the media in +-- the ifType column of the ifTable object, and "number" is +-- the actual integer value corresponding to the symbol. + +-- the SNMP group + +-- Implementation of the SNMP group is mandatory for all +-- systems which support an SNMP protocol entity. Some of +-- the objects defined below will be zero-valued in those +-- SNMP implementations that are optimized to support only +-- those functions specific to either a management agent or +-- a management station. In particular, it should be +-- observed that the objects below refer to an SNMP entity, +-- and there may be several SNMP entities residing on a +-- managed node (e.g., if the node is hosting acting as +-- a management station). + +snmpInPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of Messages delivered to the + SNMP entity from the transport service." + ::= { snmp 1 } + +snmpOutPkts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Messages which were + passed from the SNMP protocol entity to the + transport service." + ::= { snmp 2 } + +snmpInBadVersions OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Messages which were + delivered to the SNMP protocol entity and were for + an unsupported SNMP version." + ::= { snmp 3 } + +snmpInBadCommunityNames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Messages delivered to + the SNMP protocol entity which used a SNMP + community name not known to said entity." + ::= { snmp 4 } + +snmpInBadCommunityUses OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Messages delivered to + the SNMP protocol entity which represented an SNMP + operation which was not allowed by the SNMP + community named in the Message." + ::= { snmp 5 } + +snmpInASNParseErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of ASN.1 or BER errors + encountered by the SNMP protocol entity when + decoding received SNMP Messages." + ::= { snmp 6 } + +-- { snmp 7 } is not used + +snmpInTooBigs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + delivered to the SNMP protocol entity and for + which the value of the error-status field is + `tooBig'." + ::= { snmp 8 } + +snmpInNoSuchNames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + delivered to the SNMP protocol entity and for + which the value of the error-status field is + `noSuchName'." + ::= { snmp 9 } + +snmpInBadValues OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + delivered to the SNMP protocol entity and for + which the value of the error-status field is + `badValue'." + ::= { snmp 10 } + +snmpInReadOnlys OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number valid SNMP PDUs which were + delivered to the SNMP protocol entity and for + which the value of the error-status field is + `readOnly'. It should be noted that it is a + protocol error to generate an SNMP PDU which + contains the value `readOnly' in the error-status + field, as such this object is provided as a means + of detecting incorrect implementations of the + + SNMP." + ::= { snmp 11 } + +snmpInGenErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + delivered to the SNMP protocol entity and for + which the value of the error-status field is + `genErr'." + ::= { snmp 12 } + +snmpInTotalReqVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of MIB objects which have been + retrieved successfully by the SNMP protocol entity + as the result of receiving valid SNMP Get-Request + and Get-Next PDUs." + ::= { snmp 13 } + +snmpInTotalSetVars OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of MIB objects which have been + altered successfully by the SNMP protocol entity + as the result of receiving valid SNMP Set-Request + PDUs." + ::= { snmp 14 } + +snmpInGetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Request PDUs which + have been accepted and processed by the SNMP + protocol entity." + ::= { snmp 15 } + +snmpInGetNexts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Next PDUs which have + been accepted and processed by the SNMP protocol + entity." + ::= { snmp 16 } + +snmpInSetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Set-Request PDUs which + have been accepted and processed by the SNMP + protocol entity." + ::= { snmp 17 } + +snmpInGetResponses OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Response PDUs which + have been accepted and processed by the SNMP + protocol entity." + ::= { snmp 18 } + +snmpInTraps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Trap PDUs which have + been accepted and processed by the SNMP protocol + entity." + ::= { snmp 19 } + +snmpOutTooBigs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + generated by the SNMP protocol entity and for + which the value of the error-status field is + `tooBig.'" + ::= { snmp 20 } + +snmpOutNoSuchNames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + generated by the SNMP protocol entity and for + which the value of the error-status is + `noSuchName'." + ::= { snmp 21 } + +snmpOutBadValues OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + generated by the SNMP protocol entity and for + which the value of the error-status field is + `badValue'." + ::= { snmp 22 } + +-- { snmp 23 } is not used + +snmpOutGenErrs OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP PDUs which were + generated by the SNMP protocol entity and for + which the value of the error-status field is + `genErr'." + ::= { snmp 24 } + +snmpOutGetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Request PDUs which + have been generated by the SNMP protocol entity." + ::= { snmp 25 } + +snmpOutGetNexts OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Next PDUs which have + been generated by the SNMP protocol entity." + ::= { snmp 26 } + +snmpOutSetRequests OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Set-Request PDUs which + have been generated by the SNMP protocol entity." + ::= { snmp 27 } + +snmpOutGetResponses OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Get-Response PDUs which + have been generated by the SNMP protocol entity." + ::= { snmp 28 } + +snmpOutTraps OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of SNMP Trap PDUs which have + been generated by the SNMP protocol entity." + ::= { snmp 29 } + +snmpEnableAuthenTraps OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates whether the SNMP agent process is + permitted to generate authentication-failure + traps. The value of this object overrides any + configuration information; as such, it provides a + means whereby all authentication-failure traps may + be disabled. + + Note that it is strongly recommended that this + object be stored in non-volatile memory so that it + remains constant between re-initializations of the + network management system." + ::= { snmp 30 } + +END -- cgit v1.2.3