From 8b45597a9a24925b3a62c4fe793661bfbc682bcc Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Sat, 28 Jan 2006 00:00:04 +0000 Subject: Add MIBS that we distribute with the app. --- mibs/RIPv2-MIB.txt | 530 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 530 insertions(+) create mode 100644 mibs/RIPv2-MIB.txt (limited to 'mibs/RIPv2-MIB.txt') diff --git a/mibs/RIPv2-MIB.txt b/mibs/RIPv2-MIB.txt new file mode 100644 index 0000000..6c92fb5 --- /dev/null +++ b/mibs/RIPv2-MIB.txt @@ -0,0 +1,530 @@ + RIPv2-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, + TimeTicks, IpAddress FROM SNMPv2-SMI + TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + mib-2 FROM RFC1213-MIB; + + -- This MIB module uses the extended OBJECT-TYPE macro as + -- defined in [9]. + + rip2 MODULE-IDENTITY + LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994 + ORGANIZATION "IETF RIP-II Working Group" + CONTACT-INFO + " Fred Baker + Postal: Cisco Systems + 519 Lado Drive + Santa Barbara, California 93111 + Tel: +1 805 681 0115 + E-Mail: fbaker@cisco.com + + Postal: Gary Malkin + Xylogics, Inc. + 53 Third Avenue + Burlington, MA 01803 + + Phone: (617) 272-8140 + EMail: gmalkin@Xylogics.COM" + DESCRIPTION + "The MIB module to describe the RIP2 Version 2 Protocol" + ::= { mib-2 23 } + + -- RIP-2 Management Information Base + + -- the RouteTag type represents the contents of the + -- Route Domain field in the packet header or route entry. + -- The use of the Route Domain is deprecated. + + RouteTag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "the RouteTag type represents the contents of the Route Domain + field in the packet header or route entry" + SYNTAX OCTET STRING (SIZE (2)) + +--4.1 Global Counters + +-- The RIP-2 Globals Group. +-- Implementation of this group is mandatory for systems +-- which implement RIP-2. + +-- These counters are intended to facilitate debugging quickly +-- changing routes or failing neighbors + +rip2Globals OBJECT IDENTIFIER ::= { rip2 1 } + + rip2GlobalRouteChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of route changes made to the IP Route + Database by RIP. This does not include the refresh + of a route's age." + ::= { rip2Globals 1 } + + rip2GlobalQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of responses sent to RIP queries + from other systems." + ::= { rip2Globals 2 } + +--4.2 RIP Interface Tables + +-- RIP Interfaces Groups +-- Implementation of these Groups is mandatory for systems +-- which implement RIP-2. + +-- The RIP Interface Status Table. + + rip2IfStatTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rip2IfStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of subnets which require separate + status monitoring in RIP." + ::= { rip2 2 } + + rip2IfStatEntry OBJECT-TYPE + SYNTAX Rip2IfStatEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single Routing Domain in a single Subnet." + INDEX { rip2IfStatAddress } + ::= { rip2IfStatTable 1 } + + Rip2IfStatEntry ::= + SEQUENCE { + rip2IfStatAddress + IpAddress, + rip2IfStatRcvBadPackets + Counter32, + rip2IfStatRcvBadRoutes + Counter32, + rip2IfStatSentUpdates + Counter32, + rip2IfStatStatus + RowStatus + } + + rip2IfStatAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of this system on the indicated + subnet. For unnumbered interfaces, the value 0.0.0.N, + where the least significant 24 bits (N) is the ifIndex + for the IP Interface in network byte order." + ::= { rip2IfStatEntry 1 } + + rip2IfStatRcvBadPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of RIP response packets received by + the RIP process which were subsequently discarded + for any reason (e.g. a version 0 packet, or an + unknown command type)." + ::= { rip2IfStatEntry 2 } + + rip2IfStatRcvBadRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of routes, in valid RIP packets, + which were ignored for any reason (e.g. unknown + address family, or invalid metric)." + ::= { rip2IfStatEntry 3 } + + rip2IfStatSentUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of triggered RIP updates actually + sent on this interface. This explicitly does + NOT include full updates sent containing new + information." + ::= { rip2IfStatEntry 4 } + + rip2IfStatStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Writing invalid has the effect of deleting + this interface." + ::= { rip2IfStatEntry 5 } + +-- The RIP Interface Configuration Table. + + rip2IfConfTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rip2IfConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of subnets which require separate + configuration in RIP." + ::= { rip2 3 } + + rip2IfConfEntry OBJECT-TYPE + SYNTAX Rip2IfConfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Single Routing Domain in a single Subnet." + INDEX { rip2IfConfAddress } + ::= { rip2IfConfTable 1 } + + Rip2IfConfEntry ::= + SEQUENCE { + rip2IfConfAddress + IpAddress, + rip2IfConfDomain + RouteTag, + rip2IfConfAuthType + INTEGER, + rip2IfConfAuthKey + OCTET STRING (SIZE(0..16)), + rip2IfConfSend + INTEGER, + rip2IfConfReceive + INTEGER, + rip2IfConfDefaultMetric + INTEGER, + rip2IfConfStatus + RowStatus, + rip2IfConfSrcAddress + IpAddress + } + + rip2IfConfAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of this system on the indicated + subnet. For unnumbered interfaces, the value 0.0.0.N, + where the least significant 24 bits (N) is the ifIndex + for the IP Interface in network byte order." + ::= { rip2IfConfEntry 1 } + + rip2IfConfDomain OBJECT-TYPE + SYNTAX RouteTag + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Value inserted into the Routing Domain field + of all RIP packets sent on this interface." + DEFVAL { '0000'h } + ::= { rip2IfConfEntry 2 } + + rip2IfConfAuthType OBJECT-TYPE + SYNTAX INTEGER { + noAuthentication (1), + simplePassword (2), + md5 (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of Authentication used on this + interface." + DEFVAL { noAuthentication } + ::= { rip2IfConfEntry 3 } + + rip2IfConfAuthKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value to be used as the Authentication Key + whenever the corresponding instance of + rip2IfConfAuthType has a value other than + noAuthentication. A modification of the corresponding + instance of rip2IfConfAuthType does not modify + the rip2IfConfAuthKey value. If a string shorter + than 16 octets is supplied, it will be left- + justified and padded to 16 octets, on the right, + with nulls (0x00). + + Reading this object always results in an OCTET + STRING of length zero; authentication may not + be bypassed by reading the MIB object." + DEFVAL { ''h } + ::= { rip2IfConfEntry 4 } + + rip2IfConfSend OBJECT-TYPE + SYNTAX INTEGER { + doNotSend (1), + ripVersion1 (2), + rip1Compatible (3), + ripVersion2 (4), + ripV1Demand (5), + ripV2Demand (6) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "What the router sends on this interface. + ripVersion1 implies sending RIP updates compliant + with RFC 1058. rip1Compatible implies + broadcasting RIP-2 updates using RFC 1058 route + subsumption rules. ripVersion2 implies + multicasting RIP-2 updates. ripV1Demand indicates + the use of Demand RIP on a WAN interface under RIP + Version 1 rules. ripV2Demand indicates the use of + Demand RIP on a WAN interface under Version 2 rules." + DEFVAL { rip1Compatible } + ::= { rip2IfConfEntry 5 } + + rip2IfConfReceive OBJECT-TYPE + SYNTAX INTEGER { + rip1 (1), + rip2 (2), + rip1OrRip2 (3), + doNotRecieve (4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This indicates which version of RIP updates + are to be accepted. Note that rip2 and + rip1OrRip2 implies reception of multicast + packets." + DEFVAL { rip1OrRip2 } + ::= { rip2IfConfEntry 6 } + + rip2IfConfDefaultMetric OBJECT-TYPE + SYNTAX INTEGER ( 0..15 ) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable indicates the metric that is to + be used for the default route entry in RIP updates + originated on this interface. A value of zero + indicates that no default route should be + originated; in this case, a default route via + another router may be propagated." + ::= { rip2IfConfEntry 7 } + + rip2IfConfStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Writing invalid has the effect of deleting + this interface." + ::= { rip2IfConfEntry 8 } + + rip2IfConfSrcAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The IP Address this system will use as a source + address on this interface. If it is a numbered + interface, this MUST be the same value as + rip2IfConfAddress. On unnumbered interfaces, + it must be the value of rip2IfConfAddress for + some interface on the system." + ::= { rip2IfConfEntry 9 } + +--4.3 Peer Table + +-- Peer Table + +-- The RIP Peer Group +-- Implementation of this Group is Optional + +-- This group provides information about active peer +-- relationships intended to assist in debugging. An +-- active peer is a router from which a valid RIP +-- updated has been heard in the last 180 seconds. + + rip2PeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF Rip2PeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of RIP Peers." + ::= { rip2 4 } + + rip2PeerEntry OBJECT-TYPE + SYNTAX Rip2PeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information regarding a single routing peer." + INDEX { rip2PeerAddress, rip2PeerDomain } + ::= { rip2PeerTable 1 } + + Rip2PeerEntry ::= + SEQUENCE { + rip2PeerAddress + IpAddress, + rip2PeerDomain + RouteTag, + rip2PeerLastUpdate + TimeTicks, + rip2PeerVersion + INTEGER, + rip2PeerRcvBadPackets + Counter32, + rip2PeerRcvBadRoutes + Counter32 + } + + rip2PeerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address that the peer is using as its source + address. Note that on an unnumbered link, this may + not be a member of any subnet on the system." + ::= { rip2PeerEntry 1 } + + rip2PeerDomain OBJECT-TYPE + SYNTAX RouteTag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value in the Routing Domain field in RIP + packets received from the peer. As domain suuport + is deprecated, this must be zero." + ::= { rip2PeerEntry 2 } + + rip2PeerLastUpdate OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the most recent + RIP update was received from this system." + ::= { rip2PeerEntry 3 } + + rip2PeerVersion OBJECT-TYPE + SYNTAX INTEGER ( 0..255 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The RIP version number in the header of the + last RIP packet received." + ::= { rip2PeerEntry 4 } + + rip2PeerRcvBadPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of RIP response packets from this + peer discarded as invalid." + ::= { rip2PeerEntry 5 } + + + rip2PeerRcvBadRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of routes from this peer that were + ignored because the entry format was invalid." + ::= { rip2PeerEntry 6 } + +-- conformance information + +rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 } + +rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 } +rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 } + +-- compliance statements +rip2Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement " + MODULE -- this module + MANDATORY-GROUPS { + rip2GlobalGroup, + rip2IfStatGroup, + rip2IfConfGroup, + rip2PeerGroup + } + GROUP rip2GlobalGroup + DESCRIPTION + "This group defines global controls for RIP-II systems." + GROUP rip2IfStatGroup + DESCRIPTION + "This group defines interface statistics for RIP-II systems." + GROUP rip2IfConfGroup + DESCRIPTION + "This group defines interface configuration for RIP-II systems." + GROUP rip2PeerGroup + DESCRIPTION + "This group defines peer information for RIP-II systems." + ::= { rip2Compliances 1 } + +-- units of conformance + +rip2GlobalGroup OBJECT-GROUP + OBJECTS { + rip2GlobalRouteChanges, + rip2GlobalQueries + } + STATUS current + DESCRIPTION + "This group defines global controls for RIP-II systems." + ::= { rip2Groups 1 } +rip2IfStatGroup OBJECT-GROUP + OBJECTS { + rip2IfStatAddress, + rip2IfStatRcvBadPackets, + rip2IfStatRcvBadRoutes, + rip2IfStatSentUpdates, + rip2IfStatStatus + } + STATUS current + DESCRIPTION + "This group defines interface statistics for RIP-II systems." + ::= { rip2Groups 2 } +rip2IfConfGroup OBJECT-GROUP + OBJECTS { + rip2IfConfAddress, + rip2IfConfAuthType, + rip2IfConfAuthKey, + rip2IfConfSend, + rip2IfConfReceive, + rip2IfConfDefaultMetric, + rip2IfConfStatus, + rip2IfConfSrcAddress + } + STATUS current + DESCRIPTION + "This group defines interface configuration for RIP-II systems." + ::= { rip2Groups 3 } +rip2PeerGroup OBJECT-GROUP + OBJECTS { + rip2PeerAddress, + rip2PeerDomain, + rip2PeerLastUpdate, + rip2PeerVersion, + rip2PeerRcvBadPackets, + rip2PeerRcvBadRoutes + } + STATUS current + DESCRIPTION + "This group defines peer information for RIP-II systems." + ::= { rip2Groups 4 } +END -- cgit v1.2.3