From fc9ee15902d0dc811bb56d65179c93231f05403c Mon Sep 17 00:00:00 2001 From: Stef Walter Date: Sat, 24 Oct 2009 16:34:22 +0000 Subject: Add more MIB files from FreeBSD and BSNMP --- mibs/RSTP-MIB.txt | 325 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 325 insertions(+) create mode 100644 mibs/RSTP-MIB.txt (limited to 'mibs/RSTP-MIB.txt') diff --git a/mibs/RSTP-MIB.txt b/mibs/RSTP-MIB.txt new file mode 100644 index 0000000..26c1ee7 --- /dev/null +++ b/mibs/RSTP-MIB.txt @@ -0,0 +1,325 @@ +-- +-- Copyright (C) The Internet Society (2005). +-- +-- This document is subject to the rights, licenses and restrictions +-- contained in BCP 78, and except as set forth therein, the authors +-- retain all their rights. +-- +-- This document and the information contained herein are provided on an +-- "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS +-- OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET +-- ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, +-- INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE +-- INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED +-- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +-- +-- $FreeBSD: src/usr.sbin/bsnmpd/modules/snmp_bridge/RSTP-MIB.txt,v 1.1.12.1 2009/08/03 08:13:06 kensmith Exp $ +-- + +RSTP-MIB DEFINITIONS ::= BEGIN + +-- ------------------------------------------------------------- +-- MIB for IEEE 802.1w Rapid Spanning Tree Protocol +-- ------------------------------------------------------------- + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2 + FROM SNMPv2-SMI + TruthValue + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + dot1dStp, dot1dStpPortEntry + FROM BRIDGE-MIB; + +rstpMIB MODULE-IDENTITY + LAST-UPDATED "200512070000Z" + ORGANIZATION "IETF Bridge MIB Working Group" + CONTACT-INFO + "Email: Bridge-mib@ietf.org" + DESCRIPTION + "The Bridge MIB Extension module for managing devices + that support the Rapid Spanning Tree Protocol defined + by IEEE 802.1w. + + Copyright (C) The Internet Society (2005). This version of + this MIB module is part of RFC 4318; See the RFC itself for + full legal notices." + + REVISION "200512070000Z" + DESCRIPTION + "The initial version of this MIB module as published in + RFC 4318." + ::= { mib-2 134 } + +-- ---------------------------------------------------------- -- +-- subtrees in the RSTP-MIB +-- ---------------------------------------------------------- -- + +rstpNotifications OBJECT IDENTIFIER ::= { rstpMIB 0 } +rstpObjects OBJECT IDENTIFIER ::= { rstpMIB 1 } +rstpConformance OBJECT IDENTIFIER ::= { rstpMIB 2 } + +-- ------------------------------------------------------------- +-- Addition to the dot1dStp group +-- ------------------------------------------------------------- + +dot1dStpVersion OBJECT-TYPE + SYNTAX INTEGER { + stpCompatible(0), + rstp(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The version of Spanning Tree Protocol the bridge is + currently running. The value 'stpCompatible(0)' + indicates the Spanning Tree Protocol specified in + IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid + Spanning Tree Protocol specified in IEEE 802.1w and + clause 17 of 802.1D-2004. The values are directly from + the IEEE standard. New values may be defined as future + versions of the protocol become available. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1w clause 14.8.1, 17.12, 17.16.1" + DEFVAL { rstp } + ::= { dot1dStp 16 } + +dot1dStpTxHoldCount OBJECT-TYPE + SYNTAX Integer32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value used by the Port Transmit state machine to limit + the maximum transmission rate. + + The value of this object MUST be retained across + reinitializations of the management system." + + REFERENCE + "IEEE 802.1w clause 17.16.6" + DEFVAL { 3 } + ::= { dot1dStp 17 } + +-- +-- { dot1dStp 18 } was used to represent dot1dStpPathCostDefault +-- in an earlier version of this MIB. It has since been +-- obsoleted, and should not be used. +-- + +dot1dStpExtPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1dStpExtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table that contains port-specific Rapid Spanning Tree + information." + ::= { dot1dStp 19 } + +dot1dStpExtPortEntry OBJECT-TYPE + SYNTAX Dot1dStpExtPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Rapid Spanning Tree information maintained by + each port." + AUGMENTS { dot1dStpPortEntry } + ::= { dot1dStpExtPortTable 1 } + +Dot1dStpExtPortEntry ::= + SEQUENCE { + dot1dStpPortProtocolMigration + TruthValue, + dot1dStpPortAdminEdgePort + TruthValue, + dot1dStpPortOperEdgePort + TruthValue, + dot1dStpPortAdminPointToPoint + INTEGER, + dot1dStpPortOperPointToPoint + TruthValue, + dot1dStpPortAdminPathCost + Integer32 + } + +dot1dStpPortProtocolMigration OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When operating in RSTP (version 2) mode, writing true(1) + to this object forces this port to transmit RSTP BPDUs. + Any other operation on this object has no effect and + it always returns false(2) when read." + REFERENCE + "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26" + ::= { dot1dStpExtPortEntry 1 } + +dot1dStpPortAdminEdgePort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative value of the Edge Port parameter. A + value of true(1) indicates that this port should be + assumed as an edge-port, and a value of false(2) indicates + that this port should be assumed as a non-edge-port. + Setting this object will also cause the corresponding + instance of dot1dStpPortOperEdgePort to change to the + same value. Note that even when this object's value + is true, the value of the corresponding instance of + dot1dStpPortOperEdgePort can be false if a BPDU has + been received. + + The value of this object MUST be retained across + reinitializations of the management system." + + REFERENCE + "IEEE 802.1t clause 14.8.2, 18.3.3" + ::= { dot1dStpExtPortEntry 2 } + +dot1dStpPortOperEdgePort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational value of the Edge Port parameter. The + object is initialized to the value of the corresponding + instance of dot1dStpPortAdminEdgePort. When the + corresponding instance of dot1dStpPortAdminEdgePort is + set, this object will be changed as well. This object + will also be changed to false on reception of a BPDU." + + REFERENCE + "IEEE 802.1t clause 14.8.2, 18.3.4" + ::= { dot1dStpExtPortEntry 3 } + +dot1dStpPortAdminPointToPoint OBJECT-TYPE + SYNTAX INTEGER { + forceTrue(0), + forceFalse(1), + auto(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative point-to-point status of the LAN segment + attached to this port, using the enumeration values of the + IEEE 802.1w clause. A value of forceTrue(0) indicates + that this port should always be treated as if it is + connected to a point-to-point link. A value of + forceFalse(1) indicates that this port should be treated as + having a shared media connection. A value of auto(2) + indicates that this port is considered to have a + point-to-point link if it is an Aggregator and all of its + members are aggregatable, or if the MAC entity + is configured for full duplex operation, either through + auto-negotiation or by management means. Manipulating this + object changes the underlying adminPortToPortMAC. + + The value of this object MUST be retained across + reinitializations of the management system." + + REFERENCE + "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" + ::= { dot1dStpExtPortEntry 4 } + +dot1dStpPortOperPointToPoint OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational point-to-point status of the LAN segment + attached to this port. It indicates whether a port is + considered to have a point-to-point connection. + If adminPointToPointMAC is set to auto(2), then the value + of operPointToPointMAC is determined in accordance with the + specific procedures defined for the MAC entity concerned, + as defined in IEEE 802.1w, clause 6.5. The value is + determined dynamically; that is, it is re-evaluated whenever + the value of adminPointToPointMAC changes, and whenever + the specific procedures defined for the MAC entity evaluate + a change in its point-to-point status." + REFERENCE + "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2" + ::= { dot1dStpExtPortEntry 5 } + +dot1dStpPortAdminPathCost OBJECT-TYPE + SYNTAX Integer32 (0..200000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administratively assigned value for the contribution + of this port to the path cost of paths toward the spanning + tree root. + + Writing a value of '0' assigns the automatically calculated + default Path Cost value to the port. If the default Path + Cost is being used, this object returns '0' when read. + + This complements the object dot1dStpPortPathCost or + dot1dStpPortPathCost32, which returns the operational value + of the path cost. + + The value of this object MUST be retained across + reinitializations of the management system." + REFERENCE + "IEEE 802.1D-1998: Section 8.5.5.3" + ::= { dot1dStpExtPortEntry 6 } + +-- ------------------------------------------------------------- +-- rstpMIB - Conformance Information +-- ------------------------------------------------------------- + +rstpGroups OBJECT IDENTIFIER ::= { rstpConformance 1 } + +rstpCompliances OBJECT IDENTIFIER ::= { rstpConformance 2 } + +-- ------------------------------------------------------------- +-- Units of conformance +-- ------------------------------------------------------------- + +rstpBridgeGroup OBJECT-GROUP + OBJECTS { + dot1dStpVersion, + dot1dStpTxHoldCount + } + STATUS current + DESCRIPTION + "Rapid Spanning Tree information for the bridge." + ::= { rstpGroups 1 } + +rstpPortGroup OBJECT-GROUP + OBJECTS { + dot1dStpPortProtocolMigration, + dot1dStpPortAdminEdgePort, + dot1dStpPortOperEdgePort, + dot1dStpPortAdminPointToPoint, + dot1dStpPortOperPointToPoint, + dot1dStpPortAdminPathCost + } + STATUS current + DESCRIPTION + "Rapid Spanning Tree information for individual ports." + ::= { rstpGroups 2 } + +-- ------------------------------------------------------------- +-- Compliance statements +-- ------------------------------------------------------------- + +rstpCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for device support of Rapid + Spanning Tree Protocol (RSTP) bridging services." + MODULE + MANDATORY-GROUPS { + rstpBridgeGroup, + rstpPortGroup + } + ::= { rstpCompliances 1 } + +END -- cgit v1.2.3