From 8b45597a9a24925b3a62c4fe793661bfbc682bcc Mon Sep 17 00:00:00 2001
From: Stef Walter <stef@memberwebs.com>
Date: Sat, 28 Jan 2006 00:00:04 +0000
Subject: Add MIBS that we distribute with the app.

---
 mibs/UDP-MIB.txt | 146 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 mibs/UDP-MIB.txt

(limited to 'mibs/UDP-MIB.txt')

diff --git a/mibs/UDP-MIB.txt b/mibs/UDP-MIB.txt
new file mode 100644
index 0000000..eab9338
--- /dev/null
+++ b/mibs/UDP-MIB.txt
@@ -0,0 +1,146 @@
+UDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+    IpAddress, mib-2                   FROM SNMPv2-SMI
+    MODULE-COMPLIANCE, OBJECT-GROUP    FROM SNMPv2-CONF;
+
+udpMIB MODULE-IDENTITY
+    LAST-UPDATED "9411010000Z"
+    ORGANIZATION "IETF SNMPv2 Working Group"
+    CONTACT-INFO
+            "        Keith McCloghrie
+
+             Postal: Cisco Systems, Inc.
+                     170 West Tasman Drive
+                     San Jose, CA  95134-1706
+                     US
+
+             Phone:  +1 408 526 5260
+             Email:  kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module for managing UDP implementations."
+    REVISION      "9103310000Z"
+    DESCRIPTION
+            "The initial revision of this MIB module was part of MIB-
+            II."
+    ::= { mib-2 50 }
+
+-- the UDP group
+
+udp      OBJECT IDENTIFIER ::= { mib-2 7 }
+
+udpInDatagrams OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of UDP datagrams delivered to UDP users."
+    ::= { udp 1 }
+
+udpNoPorts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of received UDP datagrams for which there
+            was no application at the destination port."
+    ::= { udp 2 }
+
+udpInErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of received UDP datagrams that could not be
+            delivered for reasons other than the lack of an application
+            at the destination port."
+    ::= { udp 3 }
+
+udpOutDatagrams OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of UDP datagrams sent from this entity."
+    ::= { udp 4 }
+
+-- the UDP Listener table
+
+-- The UDP listener table contains information about this
+-- entity's UDP end-points on which a local application is
+-- currently accepting datagrams.
+
+udpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF UdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A table containing UDP listener information."
+    ::= { udp 5 }
+
+udpEntry OBJECT-TYPE
+    SYNTAX      UdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Information about a particular current UDP listener."
+    INDEX   { udpLocalAddress, udpLocalPort }
+    ::= { udpTable 1 }
+
+UdpEntry ::= SEQUENCE {
+        udpLocalAddress  IpAddress,
+        udpLocalPort     INTEGER
+    }
+
+udpLocalAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The local IP address for this UDP listener.  In the case of
+            a UDP listener which is willing to accept datagrams for any
+            IP interface associated with the node, the value 0.0.0.0 is
+            used."
+    ::= { udpEntry 1 }
+
+udpLocalPort OBJECT-TYPE
+    SYNTAX      INTEGER (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The local port number for this UDP listener."
+    ::= { udpEntry 2 }
+
+-- conformance information
+
+udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 }
+
+udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 }
+udpMIBGroups      OBJECT IDENTIFIER ::= { udpMIBConformance 2 }
+
+-- compliance statements
+
+udpMIBCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMPv2 entities which
+            implement UDP."
+    MODULE  -- this module
+        MANDATORY-GROUPS { udpGroup
+                           }
+    ::= { udpMIBCompliances 1 }
+
+-- units of conformance
+
+udpGroup OBJECT-GROUP
+    OBJECTS   { udpInDatagrams, udpNoPorts,
+                udpInErrors, udpOutDatagrams,
+                udpLocalAddress, udpLocalPort }
+    STATUS    current
+    DESCRIPTION
+            "The udp group of objects providing for management of UDP
+            entities."
+    ::= { udpMIBGroups 1 }
+
+END
-- 
cgit v1.2.3