Add new MIBs to rrdbot.

1 files changed, 1194 insertions, 0 deletions

diff --git a/mibs/UCD-SNMP-MIB.txt b/mibs/UCD-SNMP-MIB.txt
new file mode 100644
index 0000000..d33f8fd
--- /dev/null
+++ b/mibs/UCD-SNMP-MIB.txt
@@ -0,0 +1,1194 @@
+UCD-SNMP-MIB DEFINITIONS ::= BEGIN
+
+-- Design notes:
+--
+-- The design of this mib may seem unusual in parts, as it was
+-- designed for ease of numerical management routines.
+--
+-- In that light, most sub-sections of this mib have four common
+-- numerical oid consistencies:
+--
+-- 2021.ID.1   : an integer index value.  In scalers, this is always
+--               of value 1.  In tables it is a row index.
+-- 2021.ID.2   : a name of the script, process, etc. that this row represents.
+-- 2021.ID.100 : An error flag indicating if an error is present on
+--               that row (a threshold value was crossed, etc).
+-- 2021.ID.101 : An error string describing why the error flag is non-0.
+--
+-- These conventions enable managers to easy examine portions of the
+-- mib by setting the ID to the sub-section they are interested in
+-- monitoring, and then scanning the .100 value to check for an
+-- error(s), and get a more specific error message from .101 for the
+-- named check found in .2.
+--
+-- Row numbers between 2 and 100 are sub-section specific.
+--
+-- Mib sections utilizing the above conventions:
+--   Tables:  	procTable, execTable, diskTable, loadTable
+--   Scalers: 	memory, snmperrs
+
+
+IMPORTS
+    OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
+    Integer32, Opaque, enterprises, Counter32
+        FROM SNMPv2-SMI
+
+    TEXTUAL-CONVENTION, DisplayString, TruthValue
+	FROM SNMPv2-TC;
+
+ucdavis MODULE-IDENTITY
+    LAST-UPDATED "200101170000Z"
+    ORGANIZATION "University of California, Davis"
+    CONTACT-INFO
+	 "The ucd-snmp-coders mailing list is the best place
+	 to write for public questions about the ucd-snmp
+	 project: ucd-snmp-coders@ucd-snmp.ucdavis.edu
+
+         Primary Author: Wes Hardaker
+
+         postal:    IT-DCAS
+                    UCDavis
+                    Davis CA  95616
+         phone:     +1 530 754-7571
+         email:     wjhardaker@ucdavis.edu"
+    DESCRIPTION
+	"This file defines the private UCD SNMP MIB extensions."
+    REVISION	 "200101170000Z"
+    DESCRIPTION
+	"Added raw CPU and IO counters."
+    REVISION	 "9912090000Z"
+    DESCRIPTION
+	"SMIv2 version converted from older MIB definitions."
+    ::= { enterprises 2021 }
+
+-- Current UCD core mib table entries:
+--   prTable          OBJECT IDENTIFIER ::= { ucdavis   2 }
+--   memory           OBJECT IDENTIFIER ::= { ucdavis   4 }
+--   extTable         OBJECT IDENTIFIER ::= { ucdavis   8 }
+--   diskTable        OBJECT IDENTIFIER ::= { ucdavis   9 }
+--   loadTable        OBJECT IDENTIFIER ::= { ucdavis  10 }
+--   systemStats      OBJECT IDENTIFIER ::= { ucdavis  11 }
+--   ucdDemoMIB       OBJECT IDENTIFIER ::= { ucdavis  14 } - UCD-DEMO-MIB
+--   fileTable        OBJECT IDENTIFIER ::= { ucdavis  15 }
+--   version          OBJECT IDENTIFIER ::= { ucdavis 100 }
+--   snmperrs         OBJECT IDENTIFIER ::= { ucdavis 101 }
+--   mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 }
+
+-- Older mib table entries that were changed to new locations above:
+--   processes        OBJECT IDENTIFIER ::= { ucdavis   1 }
+--   exec             OBJECT IDENTIFIER ::= { ucdavis   3 }
+--   disk             OBJECT IDENTIFIER ::= { ucdavis   6 }
+--   load             OBJECT IDENTIFIER ::= { ucdavis   7 }
+
+-- Never implemented and removed from the mib:
+--   lockd            OBJECT IDENTIFIER ::= { ucdavis   5 }
+
+-- Branches for registering other UCD MIB modules:
+ucdInternal           OBJECT IDENTIFIER ::= { ucdavis 12 }
+ucdExperimental       OBJECT IDENTIFIER ::= { ucdavis 13 }
+
+-- OID values assigned in the ucdExperimental branch:
+--   ucdIpFwAccMIB    OBJECT IDENTIFIER ::= { ucdExperimental  1 } - UCD-IPFWACC-MIB
+--   ucdIpFilter      OBJECT IDENTIFIER ::= { ucdExperimental  2 } - UCD-IPFILTER-MIB
+--   wavelan          OBJECT IDENTIFIER ::= { ucdExperimental  3 } - WL-MIB
+--   ucdDlmodMIB      OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB
+--   ucdDiskIOMIB     OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB
+
+
+-- These are the returned values of the agent type.
+-- returned to:  .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0
+
+ucdSnmpAgent      OBJECT IDENTIFIER ::= { ucdavis 250 }
+hpux9             OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 }
+hpux10            OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 }
+sunos4            OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 }
+solaris           OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 }
+osf               OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 }
+ultrix            OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 }
+netbsd1           OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 }
+freebsd           OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 }
+irix              OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 }
+linux             OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 }
+bsdi              OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 }
+openbsd           OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 }
+unknown           OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 }
+
+--
+-- Define the Float Textual Convention
+--   This definition was written by David Perkins.
+--
+
+Float ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "A single precision floating-point number.  The semantics
+         and encoding are identical for type 'single' defined in
+         IEEE Standard for Binary Floating-Point,
+         ANSI/IEEE Std 754-1985.
+         The value is restricted to the BER serialization of
+         the following ASN.1 type:
+             FLOATTYPE ::= [120] IMPLICIT FloatType
+         (note: the value 120 is the sum of '30'h and '48'h)
+         The BER serialization of the length for values of
+         this type must use the definite length, short
+         encoding form.
+
+         For example, the BER serialization of value 123
+         of type FLOATTYPE is '9f780442f60000'h.  (The tag
+         is '9f78'h; the length is '04'h; and the value is
+         '42f60000'h.) The BER serialization of value
+         '9f780442f60000'h of data type Opaque is
+         '44079f780442f60000'h. (The tag is '44'h; the length
+         is '07'h; and the value is '9f780442f60000'h."
+    SYNTAX Opaque (SIZE (7))
+
+--
+-- Process table checks
+--
+
+prTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF PrEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"A table containing information on running
+	 programs/daemons configured for monitoring in the
+	 snmpd.conf file of the agent.  Processes violating the
+	 number of running processes required by the agent's
+	 configuration file are flagged with numerical and
+	 textual errors."
+    ::= { ucdavis 2 }
+
+prEntry OBJECT-TYPE
+    SYNTAX	PrEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+        "An entry containing a process and its statistics."
+    INDEX	{ prIndex }
+    ::= { prTable  1 }
+
+PrEntry ::= SEQUENCE {
+    prIndex		Integer32,
+    prNames		DisplayString,
+    prMin		Integer32,
+    prMax		Integer32,
+    prCount		Integer32,
+    prErrorFlag		Integer32,
+    prErrMessage	DisplayString,
+    prErrFix		Integer32,
+    prErrFixCmd		DisplayString
+}
+
+prIndex OBJECT-TYPE
+    SYNTAX	Integer32 (0..65535)
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Reference Index for each observed process."
+    ::= { prEntry 1 }
+
+prNames OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The process name we're counting/checking on."
+    ::= { prEntry 2 }
+
+prMin OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The minimum number of processes that should be
+	 running.  An error flag is generated if the number of
+	 running processes is < the minimum."
+    ::= { prEntry 3 }
+
+prMax OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The maximum number of processes that should be
+	 running.  An error flag is generated if the number of
+	 running processes is > the maximum."
+    ::= { prEntry 4 }
+
+prCount OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The number of current processes running with the name
+	 in question."
+    ::= { prEntry 5 }
+
+prErrorFlag OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"A Error flag to indicate trouble with a process.  It
+	 goes to 1 if there is an error, 0 if no error."
+    ::= { prEntry 100 }
+
+prErrMessage OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"An error message describing the problem (if one exists)."
+    ::= { prEntry 101 }
+
+prErrFix OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Setting this to one will try to fix the problem if
+	 the agent has been configured with a script to call
+	 to attempt to fix problems automatically using remote
+	 snmp operations."
+    ::= { prEntry 102 }
+
+prErrFixCmd OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The command that gets run when the prErrFix column is
+	 set to 1."
+    ::= { prEntry 103 }
+
+
+
+extTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF ExtEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"A table of extensible commands returning output and
+	 result codes.  These commands are configured via the
+	 agent's snmpd.conf file."
+    ::= { ucdavis 8 }
+
+extEntry OBJECT-TYPE
+    SYNTAX     ExtEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An entry containing an extensible script/program and its output."
+    INDEX      { extIndex }
+    ::= { extTable  1 }
+
+ExtEntry ::= SEQUENCE {
+    extIndex		Integer32,
+    extNames		DisplayString,
+    extCommand		DisplayString,
+    extResult		Integer32,
+    extOutput		DisplayString,
+    extErrFix		Integer32,
+    extErrFixCmd	DisplayString
+}
+
+extIndex OBJECT-TYPE
+    SYNTAX	Integer32 (0..65535)
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Reference Index for extensible scripts.  Simply an
+	 integer row number."
+    ::= { extEntry 1 }
+
+extNames OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"A Short, one name description of the extensible command."
+    ::= { extEntry 2 }
+
+extCommand OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The command line to be executed."
+    ::= { extEntry 3 }
+
+extResult OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The result code (exit status) from the executed command."
+    ::= { extEntry 100 }
+
+extOutput OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The first line of output of the executed command."
+    ::= { extEntry 101 }
+
+extErrFix OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Setting this to one will try to fix the problem if
+	 the agent has been configured with a script to call
+	 to attempt to fix problems automatically using remote
+	 snmp operations."
+    ::= { extEntry 102 }
+
+extErrFixCmd OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The command that gets run when the extErrFix column is
+	 set to 1."
+    ::= { extEntry 103 }
+
+--
+-- Memory usage/watch reporting.
+-- Not supported on all systems!
+-- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture.
+--
+memory OBJECT IDENTIFIER ::= { ucdavis 4 }
+
+memIndex OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Bogus Index.  This should always return the integer 0."
+    ::= { memory 1 }
+
+memErrorName OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Bogus Name. This should always return the string 'swap'."
+    ::= { memory 2 }
+
+memTotalSwap OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Swap Size configured for the host."
+    ::= { memory 3 }
+
+memAvailSwap OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Available Swap Space on the host."
+    ::= { memory 4 }
+
+memTotalReal OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Real/Physical Memory Size on the host."
+    ::= { memory 5 }
+
+memAvailReal OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Available Real/Physical Memory Space on the host."
+    ::= { memory 6 }
+
+memTotalSwapTXT OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total virtual memory used by text."
+    ::= { memory 7 }
+
+memAvailSwapTXT OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Active virtual memory used by text."
+    ::= { memory 8 }
+
+memTotalRealTXT OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Real/Physical Memory Size used by text."
+    ::= { memory 9 }
+
+memAvailRealTXT OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Active Real/Physical Memory Space used by text."
+    ::= { memory 10 }
+
+memTotalFree OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Available Memory on the host"
+    ::= { memory 11 }
+
+memMinimumSwap OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Minimum amount of free swap required to be free
+	 or else memErrorSwap is set to 1 and an error string is
+	 returned memSwapErrorMsg."
+    ::= { memory 12 }
+
+memShared OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Shared Memory"
+    ::= { memory 13 }
+
+memBuffer OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Buffered Memory"
+    ::= { memory 14 }
+
+memCached OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total Cached Memory"
+    ::= { memory 15 }
+
+memSwapError OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Error flag.  1 indicates very little swap space left"
+    ::= { memory 100 }
+
+memSwapErrorMsg OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Error message describing the Error Flag condition"
+    ::= { memory 101 }
+
+
+dskTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF DskEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"Disk watching information.  Partions to be watched
+	 are configured by the snmpd.conf file of the agent."
+    ::= { ucdavis 9 }
+
+dskEntry OBJECT-TYPE
+    SYNTAX     DskEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "An entry containing a disk and its statistics."
+    INDEX      { dskIndex }
+    ::= { dskTable  1 }
+
+DskEntry ::= SEQUENCE {
+    dskIndex		Integer32,
+    dskPath		DisplayString,
+    dskDevice		DisplayString,
+    dskMinimum		Integer32,
+    dskMinPercent	Integer32,
+    dskTotal		Integer32,
+    dskAvail		Integer32,
+    dskUsed		Integer32,
+    dskPercent		Integer32,
+    dskPercentNode	Integer32,
+    dskErrorFlag	Integer32,
+    dskErrorMsg		DisplayString
+}
+
+dskIndex OBJECT-TYPE
+    SYNTAX	Integer32 (0..65535)
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Integer reference number (row number) for the disk mib."
+    ::= { dskEntry 1 }
+
+dskPath OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Path where the disk is mounted."
+    ::= { dskEntry 2 }
+
+dskDevice OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Path of the device for the partition"
+    ::= { dskEntry 3 }
+
+dskMinimum OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Minimum space required on the disk (in kBytes) before the
+         errors are triggered.  Either this or dskMinPercent is
+         configured via the agent's snmpd.conf file."
+    ::= { dskEntry 4 }
+
+dskMinPercent OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Percentage of minimum space required on the disk before the
+         errors are triggered.  Either this or dskMinimum is
+         configured via the agent's snmpd.conf file."
+    ::= { dskEntry 5 }
+
+dskTotal OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Total size of the disk/partion (kBytes)"
+    ::= { dskEntry 6 }
+
+dskAvail OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Available space on the disk"
+    ::= { dskEntry 7 }
+
+dskUsed OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Used space on the disk"
+    ::= { dskEntry 8 }
+
+dskPercent OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Percentage of space used on disk"
+    ::= { dskEntry 9 }
+
+dskPercentNode OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Percentage of inodes used on disk"
+    ::= { dskEntry 10 }
+
+dskErrorFlag OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Error flag signaling that the disk or partition is under
+	 the minimum required space configured for it."
+    ::= { dskEntry 100 }
+
+dskErrorMsg OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"A text description providing a warning and the space left
+	 on the disk."
+    ::= { dskEntry 101 }
+
+laTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF LaEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"Load average information."
+    ::= { ucdavis 10 }
+
+laEntry OBJECT-TYPE
+    SYNTAX	LaEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"An entry containing a load average and its values."
+    INDEX	{ laIndex }
+    ::= { laTable  1 }
+
+LaEntry ::= SEQUENCE {
+    laIndex		Integer32,
+    laNames		DisplayString,
+    laLoad		DisplayString,
+    laConfig		DisplayString,
+    laLoadInt		Integer32,
+    laLoadFloat		Float,
+    laErrorFlag		Integer32,
+    laErrMessage	DisplayString
+}
+
+laIndex OBJECT-TYPE
+    SYNTAX	Integer32 (0..3)
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"reference index/row number for each observed loadave."
+    ::= { laEntry 1 }
+
+laNames OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The list of loadave names we're watching."
+    ::= { laEntry 2 }
+
+laLoad OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The 1,5 and 10 minute load averages (one per row)."
+    ::= { laEntry 3 }
+
+laConfig OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The watch point for load-averages to signal an
+	 error.  If the load averages rises above this value,
+	 the laErrorFlag below is set."
+    ::= { laEntry 4 }
+
+laLoadInt OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The 1,5 and 10 minute load averages as an integer.
+	 This is computed by taking the floating point
+	 loadaverage value and multiplying by 100, then
+	 converting the value to an integer."
+    ::= { laEntry 5 }
+
+laLoadFloat OBJECT-TYPE
+    SYNTAX	Float
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The 1,5 and 10 minute load averages as an opaquely
+	 wrapped floating point number."
+    ::= { laEntry 6 }
+
+laErrorFlag OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"A Error flag to indicate the load-average has crossed
+	 its threshold value defined in the snmpd.conf file.
+	 It is set to 1 if the threshold is crossed, 0 otherwise."
+    ::= { laEntry 100 }
+
+laErrMessage OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"An error message describing the load-average and its
+	 surpased watch-point value."
+    ::= { laEntry 101 }
+
+
+version	OBJECT IDENTIFIER ::= { ucdavis 100 }
+
+versionIndex OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Index to mib (always 0)"
+    ::= { version 1 }
+
+versionTag OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"CVS tag keyword"
+    ::= { version 2 }
+
+versionDate OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Date string from RCS keyword"
+    ::= { version 3 }
+
+versionCDate OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Date string from ctime() "
+    ::= { version 4 }
+
+versionIdent OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Id string from RCS keyword"
+    ::= { version 5 }
+
+versionConfigureOptions OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Options passed to the configure script when this agent was built."
+    ::= { version 6 }
+
+versionClearCache OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Set to 1 to clear the exec cache, if enabled"
+    ::= { version 10 }
+
+versionUpdateConfig OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Set to 1 to read-read the config file(s)."
+    ::= { version 11 }
+
+versionRestartAgent OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Set to 1 to restart the agent."
+    ::= { version 12 }
+
+versionDoDebugging OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-write
+    STATUS	current
+    DESCRIPTION
+	"Set to 1 to turn debugging statements on in the agent or 0
+	 to turn it off."
+    ::= { version 20 }
+
+
+snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }
+
+snmperrIndex OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Bogus Index for snmperrs (always 0)."
+    ::= { snmperrs 1 }
+
+snmperrNames OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"snmp"
+    ::= { snmperrs 2 }
+
+snmperrErrorFlag OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"A Error flag to indicate trouble with the agent.  It
+	 goes to 1 if there is an error, 0 if no error."
+    ::= { snmperrs 100 }
+
+snmperrErrMessage OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"An error message describing the problem (if one exists)."
+    ::= { snmperrs 101 }
+
+
+mrTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF MrEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"A table displaying all the oid's registered by mib modules in
+	 the agent.  Since the agent is modular in nature, this lists
+	 each module's OID it is responsible for and the name of the module"
+    ::= { ucdavis 102 }
+
+mrEntry OBJECT-TYPE
+    SYNTAX	MrEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"An entry containing a registered mib oid."
+    INDEX	{ IMPLIED mrIndex }
+    ::= { mrTable 1 }
+
+MrEntry ::= SEQUENCE {
+    mrIndex		OBJECT IDENTIFIER,
+    mrModuleName	DisplayString
+}
+
+mrIndex OBJECT-TYPE
+    SYNTAX	OBJECT IDENTIFIER
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The registry slot of a mibmodule."
+    ::= { mrEntry  1 }
+
+mrModuleName OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The module name that registered this OID."
+    ::= { mrEntry  2 }
+
+systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }
+
+ssIndex OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Reference Index for each observed systemStat (1)."
+    ::= { systemStats 1 }
+
+ssErrorName OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The list of systemStats names (vmstat) we're Counting."
+    ::= { systemStats 2 }
+
+ssSwapIn OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Amount of memory swapped in from disk (kB/s)."
+    ::= { systemStats 3 }
+
+ssSwapOut OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Amount of memory swapped to disk (kB/s)."
+    ::= { systemStats 4 }
+
+ssIOSent OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Blocks sent to a block device (blocks/s)."
+    ::= { systemStats 5 }
+
+ssIOReceive OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Blocks received from a block device (blocks/s)."
+    ::= { systemStats 6 }
+
+ssSysInterrupts OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The number of interrupts per second, including the clock."
+    ::= { systemStats 7 }
+
+ssSysContext OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"The number of context switches per second."
+    ::= { systemStats 8 }
+
+ssCpuUser OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"percentages of user CPU time."
+    ::= { systemStats 9 }
+
+ssCpuSystem OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"percentages of system CPU time."
+    ::= { systemStats 10 }
+
+ssCpuIdle OBJECT-TYPE
+    SYNTAX	Integer32
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"percentages of idle CPU time."
+    ::= { systemStats 11 }
+
+-- The agent only implements those of the following counters that the
+-- kernel supports! Don't expect all to be present.
+
+ssCpuRawUser OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "user CPU time."
+    ::= { systemStats 50 }
+
+ssCpuRawNice OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "nice CPU time."
+    ::= { systemStats 51 }
+
+ssCpuRawSystem OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "system CPU time."
+    ::= { systemStats 52 }
+
+ssCpuRawIdle OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "idle CPU time."
+    ::= { systemStats 53 }
+
+ssCpuRawWait OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "iowait CPU time. This is primarily a SysV thingie"
+    ::= { systemStats 54 }
+
+ssCpuRawKernel OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "kernel CPU time."
+    ::= { systemStats 55 }
+
+ssCpuRawInterrupt OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "interruptlevel CPU time. This is primarily a BSD thingie"
+    ::= { systemStats 56 }
+
+ssIORawSent OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of requests sent to a block device"
+    ::= { systemStats 57 }
+
+ssIORawReceived OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of interrupts processed"
+    ::= { systemStats 58 }
+
+ssRawInterrupts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of requests received from a block device"
+    ::= { systemStats 59 }
+
+ssRawContexts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of context switches"
+    ::= { systemStats 60 }
+
+-- possibly used in the future:
+--
+-- ssErrorFlag OBJECT-TYPE
+--     SYNTAX	   Integer32
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "Error flag."
+--     ::= { systemStats 100 }
+--
+-- ssErrMessage OBJECT-TYPE
+--     SYNTAX      DisplayString
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "Error message describing the errorflag condition."
+--     ::= { systemStats 101 }
+
+
+ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 }
+
+ucdStart NOTIFICATION-TYPE
+    STATUS	current
+    DESCRIPTION
+	""
+    ::= { ucdTraps 1 }
+
+ucdShutdown	NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION
+	"This trap is sent when the agent terminates"
+    ::= { ucdTraps 2 }
+
+--
+-- File Table:  monitor a list of files to check for a maximum size.
+--
+
+fileTable OBJECT-TYPE
+    SYNTAX	SEQUENCE OF FileEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"Table of monitored files."
+    ::= { ucdavis 15 }
+
+fileEntry OBJECT-TYPE
+    SYNTAX	FileEntry
+    MAX-ACCESS	not-accessible
+    STATUS	current
+    DESCRIPTION
+	"Entry of file"
+    INDEX	{ fileIndex }
+    ::= { fileTable 1 }
+
+FileEntry ::= SEQUENCE {
+    fileIndex		Integer32,
+    fileName		DisplayString,
+    fileSize		Integer32,
+    fileMax		Integer32,
+    fileErrorFlag	TruthValue,
+    fileErrorMsg	DisplayString
+}
+
+fileIndex OBJECT-TYPE
+    SYNTAX	Integer32 (0..2147483647)
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Index of file"
+    ::= { fileEntry 1 }
+
+fileName OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Filename"
+    ::= { fileEntry 2 }
+
+fileSize OBJECT-TYPE
+    SYNTAX	Integer32
+    UNITS       "kB"
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Size of file (kB)"
+    ::= { fileEntry 3 }
+
+fileMax	OBJECT-TYPE
+    SYNTAX	Integer32
+    UNITS       "kB"
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Limit of filesize (kB)"
+    ::= { fileEntry 4 }
+
+fileErrorFlag OBJECT-TYPE
+    SYNTAX	TruthValue
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Limit exceeded flag"
+    ::= { fileEntry 100 }
+
+fileErrorMsg OBJECT-TYPE
+    SYNTAX	DisplayString
+    MAX-ACCESS	read-only
+    STATUS	current
+    DESCRIPTION
+	"Filesize error message"
+    ::= { fileEntry 101 }
+
+END