diff options
Diffstat (limited to 'mibs/NOTIFICATION-LOG-MIB.txt')
| -rw-r--r-- | mibs/NOTIFICATION-LOG-MIB.txt | 782 |
1 files changed, 782 insertions, 0 deletions
diff --git a/mibs/NOTIFICATION-LOG-MIB.txt b/mibs/NOTIFICATION-LOG-MIB.txt new file mode 100644 index 0000000..c60b7d2 --- /dev/null +++ b/mibs/NOTIFICATION-LOG-MIB.txt @@ -0,0 +1,782 @@ +NOTIFICATION-LOG-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Unsigned32, + TimeTicks, Counter32, Counter64, + IpAddress, Opaque, mib-2 FROM SNMPv2-SMI + TimeStamp, DateAndTime, + StorageType, RowStatus, + TAddress, TDomain FROM SNMPv2-TC + SnmpAdminString, SnmpEngineID FROM SNMP-FRAMEWORK-MIB + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; + +notificationLogMIB MODULE-IDENTITY + LAST-UPDATED "200011270000Z" -- 27 November 2000 + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO "Ramanathan Kavasseri + Cisco Systems, Inc. + 170 West Tasman Drive, + San Jose CA 95134-1706. + Phone: +1 408 527 2446 + Email: ramk@cisco.com" + DESCRIPTION + "The MIB module for logging SNMP Notifications, that is, Traps + + + and Informs." +-- Revision History + + REVISION "200011270000Z" -- 27 November 2000 + DESCRIPTION "This is the initial version of this MIB. + Published as RFC 3014" + ::= { mib-2 92 } + + +notificationLogMIBObjects OBJECT IDENTIFIER ::= { notificationLogMIB 1 } + +nlmConfig OBJECT IDENTIFIER ::= { notificationLogMIBObjects 1 } +nlmStats OBJECT IDENTIFIER ::= { notificationLogMIBObjects 2 } +nlmLog OBJECT IDENTIFIER ::= { notificationLogMIBObjects 3 } + +-- +-- Configuration Section +-- + +nlmConfigGlobalEntryLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of notification entries that may be held + in nlmLogTable for all nlmLogNames added together. A particular + setting does not guarantee that much data can be held. + + If an application changes the limit while there are + Notifications in the log, the oldest Notifications MUST be + discarded to bring the log down to the new limit - thus the + value of nlmConfigGlobalEntryLimit MUST take precedence over + the values of nlmConfigGlobalAgeOut and nlmConfigLogEntryLimit, + even if the Notification being discarded has been present for + fewer minutes than the value of nlmConfigGlobalAgeOut, or if + the named log has fewer entries than that specified in + nlmConfigLogEntryLimit. + + A value of 0 means no limit. + + Please be aware that contention between multiple managers + trying to set this object to different values MAY affect the + reliability and completeness of data seen by each manager." + DEFVAL { 0 } + ::= { nlmConfig 1 } + +nlmConfigGlobalAgeOut OBJECT-TYPE + SYNTAX Unsigned32 + + + UNITS "minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of minutes a Notification SHOULD be kept in a log + before it is automatically removed. + + If an application changes the value of nlmConfigGlobalAgeOut, + Notifications older than the new time MAY be discarded to meet the + new time. + + A value of 0 means no age out. + + Please be aware that contention between multiple managers + trying to set this object to different values MAY affect the + reliability and completeness of data seen by each manager." + DEFVAL { 1440 } -- 24 hours + ::= { nlmConfig 2 } + + +-- +-- Basic Log Configuration Table +-- + +nlmConfigLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF NlmConfigLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of logging control entries." + ::= { nlmConfig 3 } + +nlmConfigLogEntry OBJECT-TYPE + SYNTAX NlmConfigLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A logging control entry. Depending on the entry's storage type + entries may be supplied by the system or created and deleted by + applications using nlmConfigLogEntryStatus." + INDEX { nlmLogName } + ::= { nlmConfigLogTable 1 } + +NlmConfigLogEntry ::= SEQUENCE { + nlmLogName SnmpAdminString, + nlmConfigLogFilterName SnmpAdminString, + nlmConfigLogEntryLimit Unsigned32, + nlmConfigLogAdminStatus INTEGER, + + + nlmConfigLogOperStatus INTEGER, + nlmConfigLogStorageType StorageType, + nlmConfigLogEntryStatus RowStatus + } + +nlmLogName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The name of the log. + + An implementation may allow multiple named logs, up to some + implementation-specific limit (which may be none). A + zero-length log name is reserved for creation and deletion by + the managed system, and MUST be used as the default log name by + systems that do not support named logs." + ::= { nlmConfigLogEntry 1 } + +nlmConfigLogFilterName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A value of snmpNotifyFilterProfileName as used as an index + into the snmpNotifyFilterTable in the SNMP Notification MIB, + specifying the locally or remotely originated Notifications + to be filtered out and not logged in this log. + + A zero-length value or a name that does not identify an + existing entry in snmpNotifyFilterTable indicate no + Notifications are to be logged in this log." + DEFVAL { ''H } + ::= { nlmConfigLogEntry 2 } + +nlmConfigLogEntryLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of notification entries that can be held in + nlmLogTable for this named log. A particular setting does not + guarantee that that much data can be held. + + If an application changes the limit while there are + Notifications in the log, the oldest Notifications are discarded + to bring the log down to the new limit. + + + + A value of 0 indicates no limit. + + Please be aware that contention between multiple managers + trying to set this object to different values MAY affect the + reliability and completeness of data seen by each manager." + DEFVAL { 0 } + ::= { nlmConfigLogEntry 3 } + +nlmConfigLogAdminStatus OBJECT-TYPE + SYNTAX INTEGER { enabled(1), disabled(2) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Control to enable or disable the log without otherwise + disturbing the log's entry. + + Please be aware that contention between multiple managers + trying to set this object to different values MAY affect the + reliability and completeness of data seen by each manager." + DEFVAL { enabled } + ::= { nlmConfigLogEntry 4 } + +nlmConfigLogOperStatus OBJECT-TYPE + SYNTAX INTEGER { disabled(1), operational(2), noFilter(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational status of this log: + + disabled administratively disabled + + operational administratively enabled and working + + noFilter administratively enabled but either + nlmConfigLogFilterName is zero length + or does not name an existing entry in + snmpNotifyFilterTable" + ::= { nlmConfigLogEntry 5 } + +nlmConfigLogStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type of this conceptual row." + ::= { nlmConfigLogEntry 6 } + +nlmConfigLogEntryStatus OBJECT-TYPE + + + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Control for creating and deleting entries. Entries may be + modified while active. + + For non-null-named logs, the managed system records the security + credentials from the request that sets nlmConfigLogStatus + to 'active' and uses that identity to apply access control to + the objects in the Notification to decide if that Notification + may be logged." + ::= { nlmConfigLogEntry 7 } + +-- +-- Statistics Section +-- + +nlmStatsGlobalNotificationsLogged OBJECT-TYPE + SYNTAX Counter32 + UNITS "notifications" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Notifications put into the nlmLogTable. This + counts a Notification once for each log entry, so a Notification + put into multiple logs is counted multiple times." + ::= { nlmStats 1 } + +nlmStatsGlobalNotificationsBumped OBJECT-TYPE + SYNTAX Counter32 + UNITS "notifications" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of log entries discarded to make room for a new entry + due to lack of resources or the value of nlmConfigGlobalEntryLimit + or nlmConfigLogEntryLimit. This does not include entries discarded + due to the value of nlmConfigGlobalAgeOut." + ::= { nlmStats 2 } + +-- +-- Log Statistics Table +-- + +nlmStatsLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF NlmStatsLogEntry + MAX-ACCESS not-accessible + + + STATUS current + DESCRIPTION + "A table of Notification log statistics entries." + ::= { nlmStats 3 } + +nlmStatsLogEntry OBJECT-TYPE + SYNTAX NlmStatsLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Notification log statistics entry." + AUGMENTS { nlmConfigLogEntry } + ::= { nlmStatsLogTable 1 } + +NlmStatsLogEntry ::= SEQUENCE { + nlmStatsLogNotificationsLogged Counter32, + nlmStatsLogNotificationsBumped Counter32 +} + +nlmStatsLogNotificationsLogged OBJECT-TYPE + SYNTAX Counter32 + UNITS "notifications" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of Notifications put in this named log." + ::= { nlmStatsLogEntry 1 } + +nlmStatsLogNotificationsBumped OBJECT-TYPE + SYNTAX Counter32 + UNITS "notifications" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of log entries discarded from this named log to make + room for a new entry due to lack of resources or the value of + nlmConfigGlobalEntryLimit or nlmConfigLogEntryLimit. This does not + include entries discarded due to the value of + nlmConfigGlobalAgeOut." + ::= { nlmStatsLogEntry 2 } + + +-- +-- Log Section +-- + +-- +-- Log Table +-- + +nlmLogTable OBJECT-TYPE + SYNTAX SEQUENCE OF NlmLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of Notification log entries. + + It is an implementation-specific matter whether entries in this + table are preserved across initializations of the management + system. In general one would expect that they are not. + + Note that keeping entries across initializations of the + management system leads to some confusion with counters and + TimeStamps, since both of those are based on sysUpTime, which + resets on management initialization. In this situation, + counters apply only after the reset and nlmLogTime for entries + made before the reset MUST be set to 0." + ::= { nlmLog 1 } + +nlmLogEntry OBJECT-TYPE + SYNTAX NlmLogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Notification log entry. + + Entries appear in this table when Notifications occur and pass + filtering by nlmConfigLogFilterName and access control. They are + removed to make way for new entries due to lack of resources or + the values of nlmConfigGlobalEntryLimit, nlmConfigGlobalAgeOut, or + nlmConfigLogEntryLimit. + + If adding an entry would exceed nlmConfigGlobalEntryLimit or system + resources in general, the oldest entry in any log SHOULD be removed + to make room for the new one. + + If adding an entry would exceed nlmConfigLogEntryLimit the oldest + entry in that log SHOULD be removed to make room for the new one. + + Before the managed system puts a locally-generated Notification + into a non-null-named log it assures that the creator of the log + has access to the information in the Notification. If not it + does not log that Notification in that log." + INDEX { nlmLogName, nlmLogIndex } + ::= { nlmLogTable 1 } + + + +NlmLogEntry ::= SEQUENCE { + nlmLogIndex Unsigned32, + nlmLogTime TimeStamp, + nlmLogDateAndTime DateAndTime, + nlmLogEngineID SnmpEngineID, + nlmLogEngineTAddress TAddress, + nlmLogEngineTDomain TDomain, + nlmLogContextEngineID SnmpEngineID, + nlmLogContextName SnmpAdminString, + nlmLogNotificationID OBJECT IDENTIFIER +} + +nlmLogIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A monotonically increasing integer for the sole purpose of + indexing entries within the named log. When it reaches the + maximum value, an extremely unlikely event, the agent wraps the + value back to 1." + ::= { nlmLogEntry 1 } + +nlmLogTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the entry was placed in the log. If + the entry occurred before the most recent management system + initialization this object value MUST be set to zero." + ::= { nlmLogEntry 2 } + +nlmLogDateAndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local date and time when the entry was logged, instantiated + only by systems that have date and time capability." + ::= { nlmLogEntry 3 } + +nlmLogEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The identification of the SNMP engine at which the Notification + + + originated. + + If the log can contain Notifications from only one engine + or the Trap is in SNMPv1 format, this object is a zero-length + string." + ::= { nlmLogEntry 4 } + +nlmLogEngineTAddress OBJECT-TYPE + SYNTAX TAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transport service address of the SNMP engine from which the + Notification was received, formatted according to the corresponding + value of nlmLogEngineTDomain. This is used to identify the source + of an SNMPv1 trap, since an nlmLogEngineId cannot be extracted + from the SNMPv1 trap pdu. + + This object MUST always be instantiated, even if the log + can contain Notifications from only one engine. + + Please be aware that the nlmLogEngineTAddress may not uniquely + identify the SNMP engine from which the Notification was received. + For example, if an SNMP engine uses DHCP or NAT to obtain + ip addresses, the address it uses may be shared with other + network devices, and hence will not uniquely identify the + SNMP engine." + ::= { nlmLogEntry 5 } + +nlmLogEngineTDomain OBJECT-TYPE + SYNTAX TDomain + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the kind of transport service by which a Notification + was received from an SNMP engine. nlmLogEngineTAddress contains + the transport service address of the SNMP engine from which + this Notification was received. + + Possible values for this object are presently found in the + Transport Mappings for SNMPv2 document (RFC 1906 [8])." + ::= { nlmLogEntry 6 } + +nlmLogContextEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + "If the Notification was received in a protocol which has a + contextEngineID element like SNMPv3, this object has that value. + Otherwise its value is a zero-length string." + ::= { nlmLogEntry 7 } + +nlmLogContextName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the SNMP MIB context from which the Notification came. + For SNMPv1 Traps this is the community string from the Trap." + ::= { nlmLogEntry 8 } + +nlmLogNotificationID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The NOTIFICATION-TYPE object identifier of the Notification that + occurred." + ::= { nlmLogEntry 9 } + +-- +-- Log Variable Table +-- + +nlmLogVariableTable OBJECT-TYPE + SYNTAX SEQUENCE OF NlmLogVariableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of variables to go with Notification log entries." + ::= { nlmLog 2 } + +nlmLogVariableEntry OBJECT-TYPE + SYNTAX NlmLogVariableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A Notification log entry variable. + + Entries appear in this table when there are variables in + the varbind list of a Notification in nlmLogTable." + INDEX { nlmLogName, nlmLogIndex, nlmLogVariableIndex } + ::= { nlmLogVariableTable 1 } + +NlmLogVariableEntry ::= SEQUENCE { + + + nlmLogVariableIndex Unsigned32, + nlmLogVariableID OBJECT IDENTIFIER, + nlmLogVariableValueType INTEGER, + nlmLogVariableCounter32Val Counter32, + nlmLogVariableUnsigned32Val Unsigned32, + nlmLogVariableTimeTicksVal TimeTicks, + nlmLogVariableInteger32Val Integer32, + nlmLogVariableOctetStringVal OCTET STRING, + nlmLogVariableIpAddressVal IpAddress, + nlmLogVariableOidVal OBJECT IDENTIFIER, + nlmLogVariableCounter64Val Counter64, + nlmLogVariableOpaqueVal Opaque +} + +nlmLogVariableIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A monotonically increasing integer, starting at 1 for a given + nlmLogIndex, for indexing variables within the logged + Notification." + ::= { nlmLogVariableEntry 1 } + +nlmLogVariableID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The variable's object identifier." + ::= { nlmLogVariableEntry 2 } + +nlmLogVariableValueType OBJECT-TYPE + SYNTAX INTEGER { counter32(1), unsigned32(2), timeTicks(3), + integer32(4), ipAddress(5), octetString(6), + objectId(7), counter64(8), opaque(9) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the value. One and only one of the value + objects that follow must be instantiated, based on this type." + ::= { nlmLogVariableEntry 3 } + +nlmLogVariableCounter32Val OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + "The value when nlmLogVariableType is 'counter32'." + ::= { nlmLogVariableEntry 4 } + +nlmLogVariableUnsigned32Val OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'unsigned32'." + ::= { nlmLogVariableEntry 5 } + +nlmLogVariableTimeTicksVal OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'timeTicks'." + ::= { nlmLogVariableEntry 6 } + +nlmLogVariableInteger32Val OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'integer32'." + ::= { nlmLogVariableEntry 7 } + +nlmLogVariableOctetStringVal OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'octetString'." + ::= { nlmLogVariableEntry 8 } + +nlmLogVariableIpAddressVal OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'ipAddress'. + Although this seems to be unfriendly for IPv6, we + have to recognize that there are a number of older + MIBs that do contain an IPv4 format address, known + as IpAddress. + + IPv6 addresses are represented using TAddress or + InetAddress, and so the underlying datatype is + + + OCTET STRING, and their value would be stored in + the nlmLogVariableOctetStringVal column." + ::= { nlmLogVariableEntry 9 } + +nlmLogVariableOidVal OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'objectId'." + ::= { nlmLogVariableEntry 10 } + +nlmLogVariableCounter64Val OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'counter64'." + ::= { nlmLogVariableEntry 11 } + +nlmLogVariableOpaqueVal OBJECT-TYPE + SYNTAX Opaque + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value when nlmLogVariableType is 'opaque'." + ::= { nlmLogVariableEntry 12 } + + +-- +-- Conformance +-- + +notificationLogMIBConformance OBJECT IDENTIFIER ::= + { notificationLogMIB 3 } +notificationLogMIBCompliances OBJECT IDENTIFIER ::= + { notificationLogMIBConformance 1 } +notificationLogMIBGroups OBJECT IDENTIFIER ::= + { notificationLogMIBConformance 2 } + +-- Compliance + +notificationLogMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement + the Notification Log MIB." + MODULE -- this module + + + MANDATORY-GROUPS { + notificationLogConfigGroup, + notificationLogStatsGroup, + notificationLogLogGroup + } + + OBJECT nlmConfigGlobalEntryLimit + SYNTAX Unsigned32 (0..4294967295) + MIN-ACCESS read-only + DESCRIPTION + "Implementations may choose a limit and not allow it to be + changed or may enforce an upper or lower bound on the + limit." + + OBJECT nlmConfigLogEntryLimit + SYNTAX Unsigned32 (0..4294967295) + MIN-ACCESS read-only + DESCRIPTION + "Implementations may choose a limit and not allow it to be + changed or may enforce an upper or lower bound on the + limit." + + OBJECT nlmConfigLogEntryStatus + MIN-ACCESS read-only + DESCRIPTION + "Implementations may disallow the creation of named logs." + + GROUP notificationLogDateGroup + DESCRIPTION + "This group is mandatory on systems that keep wall clock + date and time and should not be implemented on systems that + do not have a wall clock date." + + ::= { notificationLogMIBCompliances 1 } + +-- Units of Conformance + +notificationLogConfigGroup OBJECT-GROUP + OBJECTS { + nlmConfigGlobalEntryLimit, + nlmConfigGlobalAgeOut, + nlmConfigLogFilterName, + nlmConfigLogEntryLimit, + nlmConfigLogAdminStatus, + nlmConfigLogOperStatus, + nlmConfigLogStorageType, + nlmConfigLogEntryStatus + } + + + STATUS current + DESCRIPTION + "Notification log configuration management." + ::= { notificationLogMIBGroups 1 } + +notificationLogStatsGroup OBJECT-GROUP + OBJECTS { + nlmStatsGlobalNotificationsLogged, + nlmStatsGlobalNotificationsBumped, + nlmStatsLogNotificationsLogged, + nlmStatsLogNotificationsBumped + } + STATUS current + DESCRIPTION + "Notification log statistics." + ::= { notificationLogMIBGroups 2 } + +notificationLogLogGroup OBJECT-GROUP + OBJECTS { + nlmLogTime, + nlmLogEngineID, + nlmLogEngineTAddress, + nlmLogEngineTDomain, + nlmLogContextEngineID, + nlmLogContextName, + nlmLogNotificationID, + nlmLogVariableID, + nlmLogVariableValueType, + nlmLogVariableCounter32Val, + nlmLogVariableUnsigned32Val, + nlmLogVariableTimeTicksVal, + nlmLogVariableInteger32Val, + nlmLogVariableOctetStringVal, + nlmLogVariableIpAddressVal, + nlmLogVariableOidVal, + nlmLogVariableCounter64Val, + nlmLogVariableOpaqueVal + } + STATUS current + DESCRIPTION + "Notification log data." + ::= { notificationLogMIBGroups 3 } + +notificationLogDateGroup OBJECT-GROUP + OBJECTS { + nlmLogDateAndTime + } + STATUS current + + + DESCRIPTION + "Conditionally mandatory notification log data. + This group is mandatory on systems that keep wall + clock date and time and should not be implemented + on systems that do not have a wall clock date." + ::= { notificationLogMIBGroups 4 } + +END |