diff options
Diffstat (limited to 'mibs/UDP-MIB.txt')
| -rw-r--r-- | mibs/UDP-MIB.txt | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/mibs/UDP-MIB.txt b/mibs/UDP-MIB.txt new file mode 100644 index 0000000..eab9338 --- /dev/null +++ b/mibs/UDP-MIB.txt @@ -0,0 +1,146 @@ +UDP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, + IpAddress, mib-2 FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; + +udpMIB MODULE-IDENTITY + LAST-UPDATED "9411010000Z" + ORGANIZATION "IETF SNMPv2 Working Group" + CONTACT-INFO + " Keith McCloghrie + + Postal: Cisco Systems, Inc. + 170 West Tasman Drive + San Jose, CA 95134-1706 + US + + Phone: +1 408 526 5260 + Email: kzm@cisco.com" + DESCRIPTION + "The MIB module for managing UDP implementations." + REVISION "9103310000Z" + DESCRIPTION + "The initial revision of this MIB module was part of MIB- + II." + ::= { mib-2 50 } + +-- the UDP group + +udp OBJECT IDENTIFIER ::= { mib-2 7 } + +udpInDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams delivered to UDP users." + ::= { udp 1 } + +udpNoPorts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received UDP datagrams for which there + was no application at the destination port." + ::= { udp 2 } + +udpInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received UDP datagrams that could not be + delivered for reasons other than the lack of an application + at the destination port." + ::= { udp 3 } + +udpOutDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams sent from this entity." + ::= { udp 4 } + +-- the UDP Listener table + +-- The UDP listener table contains information about this +-- entity's UDP end-points on which a local application is +-- currently accepting datagrams. + +udpTable OBJECT-TYPE + SYNTAX SEQUENCE OF UdpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing UDP listener information." + ::= { udp 5 } + +udpEntry OBJECT-TYPE + SYNTAX UdpEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular current UDP listener." + INDEX { udpLocalAddress, udpLocalPort } + ::= { udpTable 1 } + +UdpEntry ::= SEQUENCE { + udpLocalAddress IpAddress, + udpLocalPort INTEGER + } + +udpLocalAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local IP address for this UDP listener. In the case of + a UDP listener which is willing to accept datagrams for any + IP interface associated with the node, the value 0.0.0.0 is + used." + ::= { udpEntry 1 } + +udpLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local port number for this UDP listener." + ::= { udpEntry 2 } + +-- conformance information + +udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 } + +udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 } +udpMIBGroups OBJECT IDENTIFIER ::= { udpMIBConformance 2 } + +-- compliance statements + +udpMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities which + implement UDP." + MODULE -- this module + MANDATORY-GROUPS { udpGroup + } + ::= { udpMIBCompliances 1 } + +-- units of conformance + +udpGroup OBJECT-GROUP + OBJECTS { udpInDatagrams, udpNoPorts, + udpInErrors, udpOutDatagrams, + udpLocalAddress, udpLocalPort } + STATUS current + DESCRIPTION + "The udp group of objects providing for management of UDP + entities." + ::= { udpMIBGroups 1 } + +END |