path: root/mibs/BEGEMOT-BRIDGE-MIB.txt

--
-- Copyright (C) 2006 Shteryana Shopova <syrinx@FreeBSD.org>
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
--    notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
--    notice, this list of conditions and the following disclaimer in the
--    documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $FreeBSD: src/usr.sbin/bsnmpd/modules/snmp_bridge/BEGEMOT-BRIDGE-MIB.txt,v 1.3.10.1 2009/08/03 08:13:06 kensmith Exp $
--

BEGEMOT-BRIDGE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Integer32, TimeTicks, mib-2
	FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus
	FROM SNMPv2-TC
    BridgeId, Timeout
	FROM BRIDGE-MIB
    InterfaceIndex FROM IF-MIB
    begemot
	FROM BEGEMOT-MIB;

begemotBridge MODULE-IDENTITY
    LAST-UPDATED "200708060000Z"
    ORGANIZATION "Sofia University St. Kliment Ohridski"
    CONTACT-INFO
	    "		Shteryana Shopova

	     Postal:	Faculty of Mathematics and Informatics
			5 James Bourchier Blvd.
			1164 Sofia
			Bulgaria

	     Fax:	+359 2 687 180

	     E-Mail:	syrinx@FreeBSD.org"
    DESCRIPTION
	    "The Begemot MIB for managing bridge interfaces."
    REVISION     "200708060000Z"
    DESCRIPTION
	     "Third revision adds begemotBridgeBasePortPrivate
	     object."
    REVISION     "200611210000Z"
    DESCRIPTION
	     "Second revision adds support for monitoring RSTP
	     specific variables."
    REVISION     "200607270000Z"
    DESCRIPTION
	    "Initial revision."
    ::= { begemot 205 }

-- ---------------------------------------------------------- --
BridgeIfName ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "16a"
    STATUS	current
    DESCRIPTION
	"Name of a bridge interface."
    SYNTAX	OCTET STRING (SIZE(1..16))

BridgeIfNameOrEmpty ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "16a"
    STATUS	current
    DESCRIPTION
	"Name of a bridge interface."
    SYNTAX	OCTET STRING (SIZE(0..16))

BridgePortId ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x.1x"
    STATUS	current
    DESCRIPTION
	"A port identifier that contains a bridge port's STP priority
	in the first octet and the port number in the second octet."
    SYNTAX	OCTET STRING (SIZE(2))

-- ---------------------------------------------------------- --
-- subtrees in the Begemot Bridge MIB
-- ---------------------------------------------------------- --
begemotBridgeNotifications	OBJECT IDENTIFIER ::= { begemotBridge 0 }

begemotBridgeBase		OBJECT IDENTIFIER ::= { begemotBridge 1 }

begemotBridgeStp		OBJECT IDENTIFIER ::= { begemotBridge 2 }

begemotBridgeTp			OBJECT IDENTIFIER ::= { begemotBridge 3 }

begemotBridgePf			OBJECT IDENTIFIER ::= { begemotBridge 4 }

begemotBridgeConfigObjects	OBJECT IDENTIFIER ::= { begemotBridge 5 }

-- ---------------------------------------------------------- --
-- the base Bridge interface table
-- ---------------------------------------------------------- --

begemotBridgeBaseTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeBaseEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains generic information for each
	bridge interface on the managed device."
    ::= { begemotBridgeBase 1 }

begemotBridgeBaseEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeBaseEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of information for the bridge interfaces on
	the managed device."
    INDEX  { begemotBridgeBaseName }
    ::= { begemotBridgeBaseTable 1 }

BegemotBridgeBaseEntry ::= SEQUENCE {
    begemotBridgeBaseName			BridgeIfName,
    begemotBridgeBaseAddress			MacAddress,
    begemotBridgeBaseNumPorts			Integer32,
    begemotBridgeBaseType			INTEGER,
    begemotBridgeBaseStatus			RowStatus
}

begemotBridgeBaseName OBJECT-TYPE
    SYNTAX	BridgeIfName
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The name of the bridge interface for which this
	entry contains management information."
    ::= { begemotBridgeBaseEntry 1 }

begemotBridgeBaseAddress OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The MAC address of the bridge interface."
    ::= { begemotBridgeBaseEntry 2 }

begemotBridgeBaseNumPorts OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of ports, members of this bridge."
    ::= { begemotBridgeBaseEntry 3 }

begemotBridgeBaseType OBJECT-TYPE
    SYNTAX	INTEGER {
		    unknown(1),
		    transparent-only(2),
		    sourceroute-only(3),
		    srt(4)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Indicates what type of bridging this bridge can
	perform."
    ::= { begemotBridgeBaseEntry 4 }

begemotBridgeBaseStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"Used to create/destroy bridge interfaces on the
	managed device."
    ::= { begemotBridgeBaseEntry 5 }

-- ---------------------------------------------------------- --
-- the base Bridge ports table
-- ---------------------------------------------------------- --

begemotBridgeBasePortTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeBasePortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table containing generic information about ports,
	members of each bridge interface."
    ::= { begemotBridgeBase 2 }

begemotBridgeBasePortEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeBasePortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of information about a specific port, member of
	a bridge interface."
    INDEX { begemotBridgeBaseName, begemotBridgeBasePortIfIndex }
    ::= { begemotBridgeBasePortTable 1 }

BegemotBridgeBasePortEntry  ::= SEQUENCE {
    begemotBridgeBasePort			Integer32,
    begemotBridgeBasePortIfIndex		InterfaceIndex,
    begemotBridgeBaseSpanEnabled		INTEGER,
    begemotBridgeBasePortDelayExceededDiscards	Counter32,
    begemotBridgeBasePortMtuExceededDiscards	Counter32,
    begemotBridgeBasePortStatus			RowStatus,
    begemotBridgeBasePortPrivate		TruthValue
}

begemotBridgeBasePort OBJECT-TYPE
    SYNTAX	Integer32 (1..65535)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The system interface index of the interface corresponding
	to this port."
    ::= { begemotBridgeBasePortEntry 1 }

begemotBridgeBasePortIfIndex OBJECT-TYPE
    SYNTAX	InterfaceIndex
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The value of the instance of the ifIndex object,
	defined in IF-MIB, for the interface corresponding
	to this port."
    ::= { begemotBridgeBasePortEntry 2 }

begemotBridgeBaseSpanEnabled OBJECT-TYPE
    SYNTAX	INTEGER {
		    enabled(1),
		    disabled(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this objects reflects whether the port
	is a span port on the specified bridge interface."
    ::= { begemotBridgeBasePortEntry 3 }

begemotBridgeBasePortDelayExceededDiscards OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames discarded by this port due
	to excessive transit delay through the bridge."
    ::= { begemotBridgeBasePortEntry 4 }

begemotBridgeBasePortMtuExceededDiscards OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames discarded by this port due
	to an excessive size."
    ::= { begemotBridgeBasePortEntry 5 }

begemotBridgeBasePortStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"Used to control addition of member ports to or
	removal of member ports from a specified bridge."
    ::= { begemotBridgeBasePortEntry 6 }

begemotBridgeBasePortPrivate OBJECT-TYPE
    SYNTAX		TruthValue
    MAX-ACCESS		read-write
    STATUS		current
    DESCRIPTION
	"The value of this objects reflects whether the port
	has a PRIVATE flag set. A port with this flags set
	can only communicate with ports not having the
	PRIVATE flag set."
    ::= { begemotBridgeBasePortEntry 7 }

-- ---------------------------------------------------------- --
-- the Bridge interface STP table
-- ---------------------------------------------------------- --

begemotBridgeStpTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeStpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains Spanning Tree Protocol information
	for each bridge interface on the managed device."
    ::= { begemotBridgeStp 1 }

begemotBridgeStpEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeStpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of information about the Spanning Tree Protocol
	operation on a bridge interface."
    AUGMENTS { begemotBridgeBaseEntry }
    ::= { begemotBridgeStpTable 1 }

BegemotBridgeStpEntry ::= SEQUENCE {
    begemotBridgeStpProtocolSpecification		INTEGER,
    begemotBridgeStpPriority				Integer32,
    begemotBridgeStpTimeSinceTopologyChange		TimeTicks,
    begemotBridgeStpTopChanges				Counter32,
    begemotBridgeStpDesignatedRoot			BridgeId,
    begemotBridgeStpRootCost				Integer32,
    begemotBridgeStpRootPort				Integer32,
    begemotBridgeStpMaxAge				Timeout,
    begemotBridgeStpHelloTime				Timeout,
    begemotBridgeStpHoldTime				Integer32,
    begemotBridgeStpForwardDelay			Timeout,
    begemotBridgeStpBridgeMaxAge			Timeout,
    begemotBridgeStpBridgeHelloTime			Timeout,
    begemotBridgeStpBridgeForwardDelay			Timeout,
    begemotBridgeStpVersion				INTEGER,
    begemotBridgeStpTxHoldCount				Integer32
}

begemotBridgeStpProtocolSpecification OBJECT-TYPE
    SYNTAX	INTEGER {
		    unknown(1),
		    decLb100(2),
		    ieee8021d(3)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The Spanning Tree Protocol version being run on the
	bridge interface. The value 'decLb100(2)' indicates the
	DEC LANbridge 100 Spanning Tree protocol, 'ieee8021d(3)'
	indicates the bridge is running IEEE 802.1D STP
	implementation."
    ::= { begemotBridgeStpEntry 1 }

begemotBridgeStpPriority OBJECT-TYPE
    SYNTAX	Integer32 (0..65535)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The priority value of the bridge interface forming the
	first two octets of the bridge identifier. Acceptable
	values are 0-61440, in steps of 4096."
    ::= { begemotBridgeStpEntry 2 }

begemotBridgeStpTimeSinceTopologyChange OBJECT-TYPE
    SYNTAX	TimeTicks
    UNITS	"centi-seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The time (in hundreds of a second) since a topology change
	was last detected by this bridge."
    ::= { begemotBridgeStpEntry 3 }

begemotBridgeStpTopChanges OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a topology change was detected by the
	bridge interface since the management entity was initialized
	or reset."
    ::= { begemotBridgeStpEntry 4 }

begemotBridgeStpDesignatedRoot OBJECT-TYPE
    SYNTAX	BridgeId
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The bridge identifier of the root of the spanning tree as
	calculated by the Spanning Tree Protocol."
    ::= { begemotBridgeStpEntry 5 }

begemotBridgeStpRootCost OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The cost of the path from this bridge to the root bridge."
    ::= { begemotBridgeStpEntry 6 }

begemotBridgeStpRootPort OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The port number of the port that offers the lowest
	cost path from this bridge to the root bridge of
	the spanning tree. If this bridge is the root bridge,
	this object shall have a value of zero."
    ::= { begemotBridgeStpEntry 7 }

begemotBridgeStpMaxAge OBJECT-TYPE
    SYNTAX	Timeout
    UNITS	"centi-seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The maximum age of Spanning Tree Protocol information
	received from the network on any port, before that
	information is discarded. This is the actual value that
	the bridge is currently using."
    ::= { begemotBridgeStpEntry 8 }

begemotBridgeStpHelloTime OBJECT-TYPE
    SYNTAX	Timeout
    UNITS	"centi-seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The amount of time between transmission of
	Configuration BPDUs by this bridge on any port,
	when it is the root of the spanning tree or is
	trying to become so. This is the actual value that
	this bridge is currently using."
    ::= { begemotBridgeStpEntry 9 }

begemotBridgeStpHoldTime OBJECT-TYPE
    SYNTAX	Integer32
    UNITS	"centi-seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"This time value determines the interval length
	during which no more than two Configuration BPDUs
	shall be transmitted by this node, in units of
	hundredths of a second."
    ::= { begemotBridgeStpEntry 10 }

begemotBridgeStpForwardDelay OBJECT-TYPE
    SYNTAX	Timeout
    UNITS	"centi-seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"This value, measured in units of hundredths of a second
	determines how long a port will stay consecutively in the
	Listening and Learning states before transitioning to
	Forwarding state.
	This is the actual value currently used by the bridge
	as opposed to begemotBridgeStpBridgeForwardDelay, which
	is the value this and all bridges participating in the
	spanning tree were to use, if this was the root bridge."
    ::= { begemotBridgeStpEntry 11 }

begemotBridgeStpBridgeMaxAge OBJECT-TYPE
    SYNTAX	Timeout (600..4000)
    UNITS	"centi-seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value that all bridges participating in the
	spanning tree would use for MaxAge if this bridge
	was the root of the spanning tree."
    ::= { begemotBridgeStpEntry 12 }

begemotBridgeStpBridgeHelloTime OBJECT-TYPE
    SYNTAX	Timeout (100..1000)
    UNITS	"centi-seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value that all bridges participating in the
	spanning tree would use for HelloTime if this
	bridge was the root of the spanning tree."
    ::= { begemotBridgeStpEntry 13 }

begemotBridgeStpBridgeForwardDelay OBJECT-TYPE
    SYNTAX	Timeout (400..3000)
    UNITS	"centi-seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value that all bridges participating in the
	spanning tree would use for ForwardDelay if this
	bridge was the root of the spanning tree."
    ::= { begemotBridgeStpEntry 14 }

begemotBridgeStpVersion OBJECT-TYPE
    SYNTAX	INTEGER {
		    stpCompatible(0),
		    rstp(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The version of Spanning Tree Protocol the bridge is
	currently running.  The value 'stpCompatible(0)'
	indicates the Spanning Tree Protocol specified in
	IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
	Spanning Tree Protocol specified in IEEE 802.1w and
	clause 17 of 802.1D-2004.  The values are directly from
	the IEEE standard.  New values may be defined as future
	versions of the protocol become available.

	The value of this object MUST be retained across
	reinitializations of the management system."
    DEFVAL	{ rstp }
    ::= { begemotBridgeStpEntry 15 }

begemotBridgeStpTxHoldCount OBJECT-TYPE
    SYNTAX	Integer32 (1..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value used by the Port Transmit state machine to limit
	the maximum transmission rate of BPDUs on the bridge interface.

	The value of this object MUST be retained across
	reinitializations of the management system."
    DEFVAL	{ 3 }
    ::= { begemotBridgeStpEntry 16 }

-- ---------------------------------------------------------- --
-- the Bridge STP ports table
-- ---------------------------------------------------------- --

begemotBridgeStpPortTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeStpPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table containing Spanning Tree Protocol information
	about the members of each bridge interface."
    ::= { begemotBridgeStp 2 }

begemotBridgeStpPortEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeStpPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of Spanning Tree Protocol information about
	a specific member of a bridge interface."
    INDEX  { begemotBridgeBaseName,  begemotBridgeBasePortIfIndex }
    ::= { begemotBridgeStpPortTable 1 }

BegemotBridgeStpPortEntry  ::= SEQUENCE {
    begemotBridgeStpPort			Integer32,
    begemotBridgeStpPortPriority		Integer32,
    begemotBridgeStpPortState			INTEGER,
    begemotBridgeStpPortEnable			INTEGER,
    begemotBridgeStpPortPathCost		Integer32,
    begemotBridgeStpPortDesignatedRoot		BridgeId,
    begemotBridgeStpPortDesignatedCost		Integer32,
    begemotBridgeStpPortDesignatedBridge	BridgeId,
    begemotBridgeStpPortDesignatedPort		BridgePortId,
    begemotBridgeStpPortForwardTransitions	Counter32
}

begemotBridgeStpPort OBJECT-TYPE
    SYNTAX	Integer32 (1..65535)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The system interface index of the interface corresponding
	to this port, for which the management entity has Spanning
	Tree Protocol information."
    ::= { begemotBridgeStpPortEntry 1 }

begemotBridgeStpPortPriority OBJECT-TYPE
    SYNTAX	Integer32 (0..255)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The STP priority of this port that is contained in the first
	octet of its Port Identifier. The second octet contains the
	value of begemotBridgeStpPort."
    ::= { begemotBridgeStpPortEntry 2 }

begemotBridgeStpPortState OBJECT-TYPE
    SYNTAX	INTEGER {
		    disabled(1),
		    blocking(2),
		    listening(3),
		    learning(4),
		    forwarding(5),
		    broken(6)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The current state of the port as defined by the operation
	of the Spanning Tree Protocol. If the Spanning Tree Protocol
	is administratively disabled on the port, this object shall
	have value disabled(1). A value of broken(6) does not correspond
	to any legal state of a port, and if present should indicate
	error in the operation of either the Spanning Tree Protocol
	implementation running on the device or the management entity."
    ::= { begemotBridgeStpPortEntry 3 }

begemotBridgeStpPortEnable OBJECT-TYPE
    SYNTAX	INTEGER {
		    enabled(1),
		    disabled(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The administrative Spanning Tree Protocol state of the
	port - value of enabled(1) indicates that the port is
	participating in the Spanning Tree Protocol operation."
    ::= { begemotBridgeStpPortEntry 4 }

begemotBridgeStpPortPathCost OBJECT-TYPE
    SYNTAX	Integer32 (1..65535)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The contribution of the path through this port, when the port
	is the Root Port, to the total cost of the path to the root
	bridge for this bridge."
    ::= { begemotBridgeStpPortEntry 5 }

begemotBridgeStpPortDesignatedRoot OBJECT-TYPE
    SYNTAX	BridgeId
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The unique Bridge Identifier of the bridge recorded as the
	root in the Root Identifier parameter of Configuration BPDUs
	transmitted by the Designated Bridge for the LAN to which
	the port is attached."
    ::= { begemotBridgeStpPortEntry 6 }

begemotBridgeStpPortDesignatedCost OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"For a Designated port, the path cost (equal to the Root
	Path Cost of the bridge) offered to the LAN to which the
	port is attached otherwise the cost of the path to the Root
	offered by the Designated Port on the LAN to which this
	Port is attached."
    ::= { begemotBridgeStpPortEntry 7 }

begemotBridgeStpPortDesignatedBridge OBJECT-TYPE
    SYNTAX	BridgeId
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The unique Bridge Identifier of the bridge to which the
	port belongs, in the case when the port is a designated
	port, otherwise the bridge believed to be the Designated
	Bridge for the LAN to which this port is attached."
    ::= { begemotBridgeStpPortEntry 8 }

begemotBridgeStpPortDesignatedPort OBJECT-TYPE
    SYNTAX	BridgePortId
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The Port Identifier of the Bridge port, on the Designated
	Bridge, through which the Designated Bridge transmits the
	Configuration Message information stored by this port."
    ::= { begemotBridgeStpPortEntry 9 }

begemotBridgeStpPortForwardTransitions OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times this port has transitioned
	from the Learning state to the Forwarding state."
    ::= { begemotBridgeStpPortEntry 10 }

-- ---------------------------------------------------------- --
-- the Bridge STP extended ports table
-- ---------------------------------------------------------- --

begemotBridgeStpExtPortTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeStpExtPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains port-specific Rapid Spanning Tree
	information for the bridge interface members."
    ::= { begemotBridgeStp 3 }

begemotBridgeStpExtPortEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeStpExtPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of Rapid Spanning Tree information maintained by
	each bridge interface member."
    AUGMENTS    { begemotBridgeStpPortEntry }
    ::= { begemotBridgeStpExtPortTable 1 }

BegemotBridgeStpExtPortEntry ::= SEQUENCE {
    begemotBridgeStpPortProtocolMigration	TruthValue,
    begemotBridgeStpPortAdminEdgePort		TruthValue,
    begemotBridgeStpPortOperEdgePort		TruthValue,
    begemotBridgeStpPortAdminPointToPoint	INTEGER,
    begemotBridgeStpPortOperPointToPoint	TruthValue,
    begemotBridgeStpPortAdminPathCost		Integer32
}

begemotBridgeStpPortProtocolMigration OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"When operating in RSTP (version 2) mode, writing true(1)
	to this object forces this port to transmit RSTP BPDUs.
	Any other operation on this object has no effect and
	it always returns false(2) when read."
    ::= { begemotBridgeStpExtPortEntry 1 }

begemotBridgeStpPortAdminEdgePort OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The administrative value of the Edge Port parameter. A
	value of true(1) indicates that this port should be
	assumed as an edge-port, and a value of false(2) indicates
	that this port should be assumed as a non-edge-port.
	Setting this object will also cause the corresponding
	instance of begemotBridgeStpPortOperEdgePort to change to
	the same value.  Note that even when this object's value
	is true, the value of the corresponding instance of
	begemotBridgeStpPortOperEdgePort can be false if a BPDU
	has been received.

	The value of this object MUST be retained across
	reinitializations of the management system."
    ::= { begemotBridgeStpExtPortEntry 2 }

begemotBridgeStpPortOperEdgePort OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operational value of the Edge Port parameter. The
	object is initialized to the value of the corresponding
	instance of begemotBridgeStpPortAdminEdgePort. When the
	corresponding instance of begemotBridgeStpPortAdminEdgePort
	is set, this object will be changed as well. This object
	will also be changed to false on reception of a BPDU."
    ::= { begemotBridgeStpExtPortEntry 3 }

begemotBridgeStpPortAdminPointToPoint OBJECT-TYPE
    SYNTAX	INTEGER {
		    forceTrue(0),
		    forceFalse(1),
		    auto(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The administrative point-to-point status of the LAN segment
	attached to this port, using the enumeration values of the
	IEEE 802.1w clause.  A value of forceTrue(0) indicates
	that this port should always be treated as if it is
	connected to a point-to-point link. A value of
	forceFalse(1) indicates that this port should be treated as
	having a shared media connection.  A value of auto(2)
	indicates that this port is considered to have a
	point-to-point link if it is an Aggregator and all of its
	members are aggregatable, or if the MAC entity
	is configured for full duplex operation, either through
	auto-negotiation or by management means.  Manipulating this
	object changes the underlying adminPortToPortMAC.

	The value of this object MUST be retained across
	reinitializations of the management system."
    ::= { begemotBridgeStpExtPortEntry 4 }

begemotBridgeStpPortOperPointToPoint OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operational point-to-point status of the LAN segment
	attached to this port. It indicates whether a port is
	considered to have a point-to-point connection.
	If adminPointToPointMAC is set to auto(2), then the value
	of operPointToPointMAC is determined in accordance with the
	specific procedures defined for the MAC entity concerned,
	as defined in IEEE 802.1w, clause 6.5. The value is
	determined dynamically; that is, it is re-evaluated whenever
	the value of adminPointToPointMAC changes, and whenever
	the specific procedures defined for the MAC entity evaluates
	a change in its point-to-point status."
    ::= { begemotBridgeStpExtPortEntry 5 }

begemotBridgeStpPortAdminPathCost OBJECT-TYPE
    SYNTAX	Integer32 (0..200000000)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The administratively assigned value for the contribution
	of this port to the path cost of paths toward the spanning
	tree root.

	Writing a value of '0' assigns the automatically calculated
	default Path Cost value to the port. If the default Path
	Cost is being used, this object returns '0' when read.

	This complements the object begemotBridgeStpPortPathCost or
	begemotBridgeStpPortPathCost32, which returns the operational
	value of the path cost.

	The value of this object MUST be retained across
	reinitializations of the management system."
    ::= { begemotBridgeStpExtPortEntry 6 }

-- ---------------------------------------------------------- --
-- the Bridge interface Transparent bridging table
-- ---------------------------------------------------------- --

begemotBridgeTpTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeTpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information regarding transparent
	bridging for each bridge interface on the managed device."
    ::= { begemotBridgeTp 1 }

begemotBridgeTpEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeTpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of information regarding transparent bridging
	on a bridge interface."
    AUGMENTS { begemotBridgeBaseEntry }
    ::= { begemotBridgeTpTable 1 }

BegemotBridgeTpEntry ::= SEQUENCE {
    begemotBridgeTpLearnedEntryDiscards		Counter32,
    begemotBridgeTpAgingTime			Integer32,
    begemotBridgeTpMaxAddresses			Integer32
}

begemotBridgeTpLearnedEntryDiscards OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The total number of Forwarding Database entries that would
	have been learnt, but have been discarded due to Forwarding
	Address Table having reached it's maximum entries limit."
    ::= { begemotBridgeTpEntry 1 }

begemotBridgeTpAgingTime OBJECT-TYPE
    SYNTAX	Integer32 (10..1000000)
    UNITS	"seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The timeout period in seconds before aging out
        dynamically learnt forwarding entries."
    ::= { begemotBridgeTpEntry 2 }

begemotBridgeTpMaxAddresses OBJECT-TYPE
    SYNTAX	Integer32 (1..10000)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The maximum number of entires that this bridge can
	learn in it's Forwarding Address Table and use for
	making forwarding decisions."
    ::= { begemotBridgeTpEntry 3 }

-- ---------------------------------------------------------- --
--  The Forwarding Database for Transparent Bridging interfaces
-- ---------------------------------------------------------- --

begemotBridgeTpFdbTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeTpFdbEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information about unicast entries
	for which the bridge interfaces have forwarding and/or
	filtering information. This information is used by the
	bridge interfaces to make forwarding decisions."
    ::= { begemotBridgeTp 2 }

begemotBridgeTpFdbEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeTpFdbEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Information about a specific unicast MAC address
	for which the bridge interface has some forwarding
	and/or filtering information."
    INDEX   { begemotBridgeBaseName, begemotBridgeTpFdbAddress }
    ::= { begemotBridgeTpFdbTable 1 }

BegemotBridgeTpFdbEntry ::= SEQUENCE {
    begemotBridgeTpFdbAddress			MacAddress,
    begemotBridgeTpFdbPort			Integer32,
    begemotBridgeTpFdbStatus			INTEGER
}

begemotBridgeTpFdbAddress OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"A unicast MAC address for which the bridge has which the
	bridge interface has some forwarding and/or filtering
	information."
    ::= { begemotBridgeTpFdbEntry 1 }

begemotBridgeTpFdbPort OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The port number of the bridge port on which a frame having
	a source address equal to the value of the corresponding
	instance of begemotBridgeTpFdbAddress has been seen."
    ::= { begemotBridgeTpFdbEntry 2 }

begemotBridgeTpFdbStatus OBJECT-TYPE
    SYNTAX	INTEGER {
		    other(1),
		    invalid(2),
		    learned(3),
		    self(4),
		    mgmt(5)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The status of this entry.  The meanings of the
	values are:
	    other(1) - none of the following.
	    invalid(2) - this entry is no longer valid (e.g.,
		it was learned but has since aged out), but has
		not yet been flushed from the table.
	    learned(3) - the value of the corresponding instance
		of begemotBridgeTpFdbPort was learned, and is being
		used.
	    self(4) - the value of the corresponding instance of
		begemotBridgeTpFdbAddress represents one of the
		bridge's addresses.  The corresponding instance of
		begemotBridgeTpFdbPort indicates which of the bridge's
		ports has this address.
	    mgmt(5) - the value of the corresponding instance of
		begemotBridgeTpFdbAddress has been added to the
		bridge's Forwarding Database by some management
		means."
    ::= { begemotBridgeTpFdbEntry 3 }

-- ---------------------------------------------------------- --
--  Ports table for Transparent Bridging interfaces
-- ---------------------------------------------------------- --

begemotBridgeTpPortTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF BegemotBridgeTpPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information about every bridge port,
	member of a bridge interface, associated with the transparent
	bridging function of the bridge."
    ::= { begemotBridgeTp 3 }

begemotBridgeTpPortEntry OBJECT-TYPE
    SYNTAX	BegemotBridgeTpPortEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of information about every bridge port, member of a
	bridge interface, associated with the bridge's transparent
	bridging function."
    INDEX  { begemotBridgeBaseName,  begemotBridgeBasePortIfIndex }
    ::= { begemotBridgeTpPortTable 1 }

BegemotBridgeTpPortEntry  ::= SEQUENCE {
    begemotBridgeTpPort				Integer32,
    begemotBridgeTpPortMaxInfo			Integer32,
    begemotBridgeTpPortInFrames			Counter32,
    begemotBridgeTpPortOutFrames		Counter32,
    begemotBridgeTpPortInDiscards		Counter32
}

begemotBridgeTpPort OBJECT-TYPE
    SYNTAX	Integer32 (1..65535)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The system interface index of the port for which this entry
	contains Transparent bridging management information."
    ::= { begemotBridgeTpPortEntry 1 }

begemotBridgeTpPortMaxInfo OBJECT-TYPE
    SYNTAX	Integer32
    UNITS	"bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The maximum size of the INFO (non-MAC) field that this port
	will receive or transmit."
    ::= { begemotBridgeTpPortEntry 2 }

begemotBridgeTpPortInFrames OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that have been received by this
	port from its segment.  Note that a frame received on the
	interface corresponding to this port is only counted by
	this object if and only if it is for a protocol being
	processed by the local bridging function, including
	bridge management frames."
    ::= { begemotBridgeTpPortEntry 3 }

begemotBridgeTpPortOutFrames OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that have been transmitted by this
	port to its segment.  Note that a frame transmitted on
	the interface corresponding to this port is only counted
	by this object if and only if it is for a protocol being
	processed by the local bridging function, including
	bridge management frames."
    ::= { begemotBridgeTpPortEntry 4 }

begemotBridgeTpPortInDiscards OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Count of received valid frames that were discarded
	(i.e., filtered) by the Forwarding Process."
    ::= { begemotBridgeTpPortEntry  5 }

-- ---------------------------------------------------------- --
-- the begemotBridgePf objects
-- ---------------------------------------------------------- --

begemotBridgePfilStatus OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Indicates whether packet filtering by some firewall
	package is enabled on the bridge interface."
    ::= { begemotBridgePf 1 }

begemotBridgePfilMembers OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"A value of true(1) indicates that packet filtering is
	enabled on both incoming and outgoing bridge member
	interfaces."
    ::= { begemotBridgePf 2 }

begemotBridgePfilIpOnly OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This value controls the handling of non-IP packets which
	are not passed on for further processing to a firewall
	package. A value of false(0) indicates that all non-IP
	Ethernet frames are passed unconditionally."
    ::= { begemotBridgePf 3 }

begemotBridgeLayer2PfStatus OBJECT-TYPE
    SYNTAX	INTEGER {
		    enabled(1),
		    disabled(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This value indicates whether layer2 filtering by a
	firewall package is enabled for bridge interfaces."
    ::= { begemotBridgePf 4 }

-- ---------------------------------------------------------- --
-- the begemotBridgeConfigObjects objects
-- ---------------------------------------------------------- --

begemotBridgeDefaultBridgeIf OBJECT-TYPE

    SYNTAX	BridgeIfNameOrEmpty
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The name of the bridge interface that will be managed
	via objects in IETF BRIDGE-MIB (RFC4188). If the
	object's value is set to an empty string, bridge interfaces
	will only be managed via objects in this MIB module."
    DEFVAL	{ "bridge0" }
    ::= { begemotBridgeConfigObjects 1 }

begemotBridgeDataUpdate OBJECT-TYPE

    SYNTAX	Timeout (1..300)
    UNITS       "seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The maximum age in seconds of the cached data."
    DEFVAL	{ 10 }
    ::= { begemotBridgeConfigObjects 2 }

begemotBridgeDataPoll OBJECT-TYPE

    SYNTAX	Timeout (1..3600)
    UNITS       "seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The polling rate of data when the module is idle."
    DEFVAL	{ 300 }
    ::= { begemotBridgeConfigObjects 3 }

-- ---------------------------------------------------------- --
-- Notifications for the Spanning Tree Protocol
-- ---------------------------------------------------------- --

begemotBridgeNewRoot NOTIFICATION-TYPE
    OBJECTS	{ begemotBridgeBaseName }
    STATUS	current
    DESCRIPTION
	"The begemotBridgeNewRoot trap indicates that one of the
	bridge interfaces on the sending agent's device has
	become the new root of the spanning tree topology it is
	participating in."
    ::= { begemotBridgeNotifications 1 }

begemotBridgeTopologyChange NOTIFICATION-TYPE
    OBJECTS	{ begemotBridgeBaseName }
    STATUS	current
    DESCRIPTION
	"A begemotBridgeTopologyChange trap is send when a member
	port on one of the bridge interfaces, monitored by the agent,
	transitions from the Learning state to the Forwarding state,
	or from the Forwarding state to the Blocking state. The trap
	is not sent if a begemotBridgeNewRoot trap is sent for the
	same transition."
    ::= { begemotBridgeNotifications 2 }

END