Add MIBS that we distribute with the app.

1 files changed, 1075 insertions, 0 deletions

diff --git a/mibs/BRIDGE-MIB.txt b/mibs/BRIDGE-MIB.txt
new file mode 100644
index 0000000..fb94840
--- /dev/null
+++ b/mibs/BRIDGE-MIB.txt
@@ -0,0 +1,1075 @@
+BRIDGE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+           Counter, TimeTicks
+                   FROM RFC1155-SMI
+           mib-2
+                   FROM RFC1213-MIB
+           OBJECT-TYPE
+                   FROM RFC-1212
+           TRAP-TYPE
+                   FROM RFC-1215;
+
+-- All representations of MAC addresses in this MIB Module
+-- use, as a textual convention (i.e. this convention does
+-- not affect their encoding), the data type:
+MacAddress ::= OCTET STRING (SIZE (6))    -- a 6 octet address
+                                          -- in the
+                                          -- "canonical"
+                                          -- order
+-- defined by IEEE 802.1a, i.e., as if it were transmitted
+-- least significant bit first, even though 802.5 (in
+-- contrast to other n802.x protocols) requires MAC
+-- addresses to be transmitted most significant bit first.
+--
+-- 16-bit addresses, if needed, are represented by setting
+-- their upper 4 octets to all 0's, i.e., AAFF would be
+-- represented as 00000000AAFF.
+
+-- Similarly, all representations of Bridge-Id in this MIB
+-- Module use, as a textual convention (i.e. this
+-- convention does not affect their encoding), the data
+-- type:
+BridgeId ::= OCTET STRING (SIZE (8))   -- the
+                                       -- Bridge-Identifier
+                                       -- as used in the
+                                       -- Spanning Tree
+-- Protocol to uniquely identify a bridge.  Its first two
+-- octets (in network byte order) contain a priority
+-- value and its last 6 octets contain the MAC address
+-- used to refer to a bridge in a unique fashion
+-- (typically, the numerically smallest MAC address
+-- of all ports on the bridge).
+
+-- Several objects in this MIB module represent values of
+-- timers used by the Spanning Tree Protocol.  In this
+-- MIB, these timers have values in units of hundreths of
+-- a second (i.e. 1/100 secs).
+-- These timers, when stored in a Spanning Tree Protocol's
+-- BPDU, are in units of 1/256 seconds.  Note, however,
+-- that 802.1D-1990 specifies a settable granularity of
+-- no more than 1 second for these timers.  To avoid
+-- ambiguity, a data type is defined here as a textual
+-- convention and all representation of these timers
+-- in this MIB module are defined using this data type.  An
+-- algorithm is also defined for converting between the
+-- different units, to ensure a timer's value is not
+-- distorted by multiple conversions.
+-- The data type is:
+
+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
+
+-- To convert a Timeout value into a value in units of
+-- 1/256 seconds, the following algorithm should be used:
+--
+--      b  = floor( (n * 256) / 100)
+--
+-- where:
+--      floor   =  quotient [ignore remainder]
+--      n is the value in 1/100 second units
+--      b is the value in 1/256 second units
+--
+-- To convert the value from 1/256 second units back to
+-- 1/100 seconds, the following algorithm should be used:
+--
+--      n = ceiling( (b * 100) / 256)
+--
+-- where:
+--      ceiling =  quotient [if remainder is 0], or
+--                 quotient + 1 [if remainder is non-zero]
+--      n is the value in 1/100 second units
+--      b is the value in 1/256 second units
+--
+-- Note: it is important that the arithmetic operations are
+-- done in the order specified (i.e., multiply first, divide
+-- second).
+
+   dot1dBridge   OBJECT IDENTIFIER ::= { mib-2 17 }
+
+-- groups in the Bridge MIB
+
+dot1dBase     OBJECT IDENTIFIER ::= { dot1dBridge 1 }
+
+dot1dStp      OBJECT IDENTIFIER ::= { dot1dBridge 2 }
+
+dot1dSr       OBJECT IDENTIFIER ::= { dot1dBridge 3 }
+-- separately documented
+
+dot1dTp       OBJECT IDENTIFIER ::= { dot1dBridge 4 }
+
+dot1dStatic   OBJECT IDENTIFIER ::= { dot1dBridge 5 }
+
+-- the dot1dBase group
+
+-- Implementation of the dot1dBase group is mandatory for all
+-- bridges.
+
+dot1dBaseBridgeAddress OBJECT-TYPE
+    SYNTAX  MacAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The MAC address used by this bridge when it must
+            be referred to in a unique fashion.   It is
+            recommended that this be the numerically smallest
+            MAC address of all ports that belong to this
+            bridge.  However it is only required to be unique.
+            When concatenated with dot1dStpPriority a unique
+            BridgeIdentifier is formed which is used in the
+            Spanning Tree Protocol."
+    REFERENCE
+            "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
+    ::= { dot1dBase 1 }
+
+dot1dBaseNumPorts OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of ports controlled by this bridging
+            entity."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.4.1.1.3"
+    ::= { dot1dBase 2 }
+
+dot1dBaseType OBJECT-TYPE
+    SYNTAX  INTEGER {
+                unknown(1),
+                transparent-only(2),
+                sourceroute-only(3),
+                srt(4)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Indicates what type of bridging this bridge can
+            perform.  If a bridge is actually performing a
+            certain type of bridging this will be indicated by
+            entries in the port table for the given type."
+    ::= { dot1dBase 3 }
+
+-- The Generic Bridge Port Table
+
+dot1dBasePortTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dBasePortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains generic information about
+            every port that is associated with this bridge.
+            Transparent, source-route, and srt ports are
+            included."
+    ::= { dot1dBase 4 }
+
+dot1dBasePortEntry OBJECT-TYPE
+    SYNTAX  Dot1dBasePortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of information for each port of the
+            bridge."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
+    INDEX  { dot1dBasePort }
+    ::= { dot1dBasePortTable 1 }
+
+Dot1dBasePortEntry ::=
+    SEQUENCE {
+        dot1dBasePort
+            INTEGER,
+        dot1dBasePortIfIndex
+            INTEGER,
+        dot1dBasePortCircuit
+
+            OBJECT IDENTIFIER,
+        dot1dBasePortDelayExceededDiscards
+            Counter,
+        dot1dBasePortMtuExceededDiscards
+            Counter
+    }
+
+dot1dBasePort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the port for which this entry
+            contains bridge management information."
+    ::= { dot1dBasePortEntry 1 }
+
+dot1dBasePortIfIndex OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the instance of the ifIndex object,
+            defined in MIB-II, for the interface corresponding
+            to this port."
+    ::= { dot1dBasePortEntry 2 }
+
+dot1dBasePortCircuit OBJECT-TYPE
+    SYNTAX  OBJECT IDENTIFIER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "For a port which (potentially) has the same value
+            of dot1dBasePortIfIndex as another port on the
+            same bridge, this object contains the name of an
+            object instance unique to this port.  For example,
+            in the case where multiple ports correspond one-
+            to-one with multiple X.25 virtual circuits, this
+            value might identify an (e.g., the first) object
+            instance associated with the X.25 virtual circuit
+            corresponding to this port.
+
+            For a port which has a unique value of
+            dot1dBasePortIfIndex, this object can have the
+            value { 0 0 }."
+    ::= { dot1dBasePortEntry 3 }
+
+dot1dBasePortDelayExceededDiscards OBJECT-TYPE
+    SYNTAX  Counter
+
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of frames discarded by this port due
+            to excessive transit delay through the bridge.  It
+            is incremented by both transparent and source
+            route bridges."
+    REFERENCE
+             "IEEE 802.1D-1990: Section 6.6.1.1.3"
+    ::= { dot1dBasePortEntry 4 }
+
+dot1dBasePortMtuExceededDiscards OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of frames discarded by this port due
+            to an excessive size.  It is incremented by both
+            transparent and source route bridges."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.6.1.1.3"
+    ::= { dot1dBasePortEntry 5 }
+
+-- the dot1dStp group
+
+-- Implementation of the dot1dStp group is optional.  It is
+-- implemented by those bridges that support the Spanning Tree
+-- Protocol.
+
+dot1dStpProtocolSpecification OBJECT-TYPE
+    SYNTAX  INTEGER {
+                unknown(1),
+                decLb100(2),
+                ieee8021d(3)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "An indication of what version of the Spanning
+            Tree Protocol is being run.  The value
+            'decLb100(2)' indicates the DEC LANbridge 100
+            Spanning Tree protocol.  IEEE 802.1d
+            implementations will return 'ieee8021d(3)'.  If
+            future versions of the IEEE Spanning Tree Protocol
+            are released that are incompatible with the
+            current version a new value will be defined."
+
+    ::= { dot1dStp 1 }
+
+dot1dStpPriority OBJECT-TYPE
+    SYNTAX  INTEGER (0..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the write-able portion of the Bridge
+            ID, i.e., the first two octets of the (8 octet
+            long) Bridge ID.  The other (last) 6 octets of the
+            Bridge ID are given by the value of
+            dot1dBaseBridgeAddress."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.7"
+    ::= { dot1dStp 2 }
+
+dot1dStpTimeSinceTopologyChange OBJECT-TYPE
+    SYNTAX  TimeTicks
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The time (in hundredths of a second) since the
+            last time a topology change was detected by the
+            bridge entity."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.8.1.1.3"
+    ::= { dot1dStp 3 }
+
+dot1dStpTopChanges OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of topology changes detected by
+            this bridge since the management entity was last
+            reset or initialized."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.8.1.1.3"
+    ::= { dot1dStp 4 }
+
+dot1dStpDesignatedRoot OBJECT-TYPE
+    SYNTAX  BridgeId
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The bridge identifier of the root of the spanning
+            tree as determined by the Spanning Tree Protocol
+            as executed by this node.  This value is used as
+
+            the Root Identifier parameter in all Configuration
+            Bridge PDUs originated by this node."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.1"
+    ::= { dot1dStp 5 }
+
+dot1dStpRootCost OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The cost of the path to the root as seen from
+            this bridge."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.2"
+    ::= { dot1dStp 6 }
+
+dot1dStpRootPort OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the port which offers the
+            lowest cost path from this bridge to the root
+            bridge."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.3"
+    ::= { dot1dStp 7 }
+
+dot1dStpMaxAge OBJECT-TYPE
+    SYNTAX  Timeout
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum age of Spanning Tree Protocol
+            information learned from the network on any port
+            before it is discarded, in units of hundredths of
+            a second.  This is the actual value that this
+            bridge is currently using."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.4"
+    ::= { dot1dStp 8 }
+
+dot1dStpHelloTime OBJECT-TYPE
+    SYNTAX  Timeout
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+
+            "The amount of time between the transmission of
+            Configuration bridge PDUs by this node on any port
+            when it is the root of the spanning tree or trying
+            to become so, in units of hundredths of a second.
+            This is the actual value that this bridge is
+            currently using."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.5"
+    ::= { dot1dStp 9 }
+
+dot1dStpHoldTime OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This time value determines the interval length
+            during which no more than two Configuration bridge
+            PDUs shall be transmitted by this node, in units
+            of hundredths of a second."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.14"
+    ::= { dot1dStp 10 }
+
+dot1dStpForwardDelay OBJECT-TYPE
+    SYNTAX  Timeout
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "This time value, measured in units of hundredths
+            of a second, controls how fast a port changes its
+            spanning state when moving towards the Forwarding
+            state.  The value determines how long the port
+            stays in each of the Listening and Learning
+            states, which precede the Forwarding state.  This
+            value is also used, when a topology change has
+            been detected and is underway, to age all dynamic
+            entries in the Forwarding Database.  [Note that
+            this value is the one that this bridge is
+            currently using, in contrast to
+            dot1dStpBridgeForwardDelay which is the value that
+            this bridge and all others would start using
+            if/when this bridge were to become the root.]"
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.6"
+    ::= { dot1dStp 11 }
+
+dot1dStpBridgeMaxAge OBJECT-TYPE
+    SYNTAX  Timeout (600..4000)
+
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The value that all bridges use for MaxAge when
+            this bridge is acting as the root.  Note that
+            802.1D-1990 specifies that the range for this
+            parameter is related to the value of
+            dot1dStpBridgeHelloTime. The granularity of this
+            timer is specified by 802.1D-1990 to be 1 second.
+            An agent may return a badValue error if a set is
+            attempted to a value which is not a whole number
+            of seconds."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.8"
+    ::= { dot1dStp 12 }
+
+dot1dStpBridgeHelloTime OBJECT-TYPE
+    SYNTAX  Timeout (100..1000)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The value that all bridges use for HelloTime when
+            this bridge is acting as the root.  The
+            granularity of this timer is specified by 802.1D-
+            1990 to be 1 second.  An agent may return a
+            badValue error if a set is attempted to a value
+            which is not a whole number of seconds."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.9"
+    ::= { dot1dStp 13 }
+
+dot1dStpBridgeForwardDelay OBJECT-TYPE
+    SYNTAX  Timeout (400..3000)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The value that all bridges use for ForwardDelay
+            when this bridge is acting as the root.  Note that
+            802.1D-1990 specifies that the range for this
+            parameter is related to the value of
+            dot1dStpBridgeMaxAge.  The granularity of this
+            timer is specified by 802.1D-1990 to be 1 second.
+            An agent may return a badValue error if a set is
+            attempted to a value which is not a whole number
+            of seconds."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.3.10"
+    ::= { dot1dStp 14 }
+
+-- The Spanning Tree Port Table
+
+dot1dStpPortTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dStpPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains port-specific information
+            for the Spanning Tree Protocol."
+    ::= { dot1dStp 15 }
+
+dot1dStpPortEntry OBJECT-TYPE
+    SYNTAX  Dot1dStpPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of information maintained by every port
+            about the Spanning Tree Protocol state for that
+            port."
+    INDEX   { dot1dStpPort }
+    ::= { dot1dStpPortTable 1 }
+
+Dot1dStpPortEntry ::=
+    SEQUENCE {
+        dot1dStpPort
+            INTEGER,
+        dot1dStpPortPriority
+            INTEGER,
+        dot1dStpPortState
+            INTEGER,
+        dot1dStpPortEnable
+            INTEGER,
+        dot1dStpPortPathCost
+            INTEGER,
+        dot1dStpPortDesignatedRoot
+            BridgeId,
+        dot1dStpPortDesignatedCost
+            INTEGER,
+        dot1dStpPortDesignatedBridge
+            BridgeId,
+        dot1dStpPortDesignatedPort
+            OCTET STRING,
+        dot1dStpPortForwardTransitions
+            Counter
+    }
+
+dot1dStpPort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the port for which this entry
+            contains Spanning Tree Protocol management
+            information."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.8.2.1.2"
+    ::= { dot1dStpPortEntry 1 }
+
+dot1dStpPortPriority OBJECT-TYPE
+    SYNTAX  INTEGER (0..255)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The value of the priority field which is
+            contained in the first (in network byte order)
+            octet of the (2 octet long) Port ID.  The other
+            octet of the Port ID is given by the value of
+            dot1dStpPort."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.1"
+    ::= { dot1dStpPortEntry 2 }
+
+dot1dStpPortState OBJECT-TYPE
+    SYNTAX  INTEGER {
+                disabled(1),
+                blocking(2),
+                listening(3),
+                learning(4),
+                forwarding(5),
+                broken(6)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port's current state as defined by
+            application of the Spanning Tree Protocol.  This
+            state controls what action a port takes on
+            reception of a frame.  If the bridge has detected
+            a port that is malfunctioning it will place that
+            port into the broken(6) state.  For ports which
+            are disabled (see dot1dStpPortEnable), this object
+            will have a value of disabled(1)."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.2"
+    ::= { dot1dStpPortEntry 3 }
+
+dot1dStpPortEnable OBJECT-TYPE
+    SYNTAX  INTEGER {
+                enabled(1),
+                disabled(2)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The enabled/disabled status of the port."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.2"
+    ::= { dot1dStpPortEntry 4 }
+
+dot1dStpPortPathCost OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The contribution of this port to the path cost of
+            paths towards the spanning tree root which include
+            this port.  802.1D-1990 recommends that the
+            default value of this parameter be in inverse
+            proportion to the speed of the attached LAN."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.3"
+    ::= { dot1dStpPortEntry 5 }
+
+dot1dStpPortDesignatedRoot OBJECT-TYPE
+    SYNTAX  BridgeId
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The unique Bridge Identifier of the Bridge
+            recorded as the Root in the Configuration BPDUs
+            transmitted by the Designated Bridge for the
+            segment to which the port is attached."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.4"
+    ::= { dot1dStpPortEntry 6 }
+
+dot1dStpPortDesignatedCost OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The path cost of the Designated Port of the
+            segment connected to this port.  This value is
+            compared to the Root Path Cost field in received
+
+            bridge PDUs."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.5"
+    ::= { dot1dStpPortEntry 7 }
+
+dot1dStpPortDesignatedBridge OBJECT-TYPE
+    SYNTAX  BridgeId
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The Bridge Identifier of the bridge which this
+            port considers to be the Designated Bridge for
+            this port's segment."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.6"
+    ::= { dot1dStpPortEntry 8 }
+
+dot1dStpPortDesignatedPort OBJECT-TYPE
+    SYNTAX  OCTET STRING (SIZE (2))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The Port Identifier of the port on the Designated
+            Bridge for this port's segment."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 4.5.5.7"
+    ::= { dot1dStpPortEntry 9 }
+
+dot1dStpPortForwardTransitions OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of times this port has transitioned
+            from the Learning state to the Forwarding state."
+    ::= { dot1dStpPortEntry 10 }
+
+-- the dot1dTp group
+
+-- Implementation of the dot1dTp group is optional.  It is
+-- implemented by those bridges that support the transparent
+-- bridging mode.  A transparent or SRT bridge will implement
+-- this group.
+
+dot1dTpLearnedEntryDiscards OBJECT-TYPE
+    SYNTAX  Counter
+
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The total number of Forwarding Database entries,
+            which have been or would have been learnt, but
+            have been discarded due to a lack of space to
+            store them in the Forwarding Database.  If this
+            counter is increasing, it indicates that the
+            Forwarding Database is regularly becoming full (a
+            condition which has unpleasant performance effects
+            on the subnetwork).  If this counter has a
+            significant value but is not presently increasing,
+            it indicates that the problem has been occurring
+            but is not persistent."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.7.1.1.3"
+    ::= { dot1dTp 1 }
+
+dot1dTpAgingTime OBJECT-TYPE
+    SYNTAX   INTEGER (10..1000000)
+    ACCESS   read-write
+    STATUS   mandatory
+    DESCRIPTION
+            "The timeout period in seconds for aging out
+            dynamically learned forwarding information.
+            802.1D-1990 recommends a default of 300 seconds."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.7.1.1.3"
+    ::= { dot1dTp 2 }
+
+--  The Forwarding Database for Transparent Bridges
+
+dot1dTpFdbTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dTpFdbEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains information about unicast
+            entries for which the bridge has forwarding and/or
+            filtering information.  This information is used
+            by the transparent bridging function in
+            determining how to propagate a received frame."
+    ::= { dot1dTp 3 }
+
+dot1dTpFdbEntry OBJECT-TYPE
+    SYNTAX  Dot1dTpFdbEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Information about a specific unicast MAC address
+            for which the bridge has some forwarding and/or
+            filtering information."
+    INDEX   { dot1dTpFdbAddress }
+    ::= { dot1dTpFdbTable 1 }
+
+Dot1dTpFdbEntry ::=
+    SEQUENCE {
+        dot1dTpFdbAddress
+            MacAddress,
+        dot1dTpFdbPort
+            INTEGER,
+        dot1dTpFdbStatus
+            INTEGER
+    }
+
+dot1dTpFdbAddress OBJECT-TYPE
+    SYNTAX  MacAddress
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "A unicast MAC address for which the bridge has
+            forwarding and/or filtering information."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
+    ::= { dot1dTpFdbEntry 1 }
+
+dot1dTpFdbPort OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "Either the value '0', or the port number of the
+            port on which a frame having a source address
+            equal to the value of the corresponding instance
+            of dot1dTpFdbAddress has been seen.  A value of
+            '0' indicates that the port number has not been
+            learned but that the bridge does have some
+            forwarding/filtering information about this
+            address (e.g. in the dot1dStaticTable).
+            Implementors are encouraged to assign the port
+            value to this object whenever it is learned even
+            for addresses for which the corresponding value of
+            dot1dTpFdbStatus is not learned(3)."
+    ::= { dot1dTpFdbEntry 2 }
+
+dot1dTpFdbStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),
+                invalid(2),
+                learned(3),
+                self(4),
+                mgmt(5)
+            }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The status of this entry.  The meanings of the
+            values are:
+              other(1)   : none of the following.  This would
+                           include the case where some other
+                           MIB object (not the corresponding
+                           instance of dot1dTpFdbPort, nor an
+                           entry in the dot1dStaticTable) is
+                           being used to determine if and how
+                           frames addressed to the value of
+                           the corresponding instance of
+                           dot1dTpFdbAddress are being
+                           forwarded.
+              invalid(2) : this entry is not longer valid
+                           (e.g., it was learned but has since
+                           aged-out), but has not yet been
+                           flushed from the table.
+              learned(3) : the value of the corresponding
+                           instance of dot1dTpFdbPort was
+                           learned, and is being used.
+              self(4)    : the value of the corresponding
+                           instance of dot1dTpFdbAddress
+                           represents one of the bridge's
+                           addresses.  The corresponding
+                           instance of dot1dTpFdbPort
+                           indicates which of the bridge's
+                           ports has this address.
+              mgmt(5)    : the value of the corresponding
+                           instance of dot1dTpFdbAddress is
+                           also the value of an existing
+                           instance of dot1dStaticAddress."
+    ::= { dot1dTpFdbEntry 3 }
+
+--  Port Table for Transparent Bridges
+
+dot1dTpPortTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dTpPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table that contains information about every
+            port that is associated with this transparent
+            bridge."
+    ::= { dot1dTp 4 }
+
+dot1dTpPortEntry OBJECT-TYPE
+    SYNTAX  Dot1dTpPortEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A list of information for each port of a
+            transparent bridge."
+    INDEX   { dot1dTpPort }
+    ::= { dot1dTpPortTable 1 }
+
+Dot1dTpPortEntry ::=
+    SEQUENCE {
+        dot1dTpPort
+            INTEGER,
+        dot1dTpPortMaxInfo
+            INTEGER,
+        dot1dTpPortInFrames
+            Counter,
+        dot1dTpPortOutFrames
+            Counter,
+        dot1dTpPortInDiscards
+            Counter
+    }
+
+dot1dTpPort OBJECT-TYPE
+    SYNTAX  INTEGER (1..65535)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The port number of the port for which this entry
+            contains Transparent bridging management
+            information."
+    ::= { dot1dTpPortEntry 1 }
+
+-- It would be nice if we could use ifMtu as the size of the
+-- largest INFO field, but we can't because ifMtu is defined
+-- to be the size that the (inter-)network layer can use which
+-- can differ from the MAC layer (especially if several layers
+-- of encapsulation are used).
+
+dot1dTpPortMaxInfo OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The maximum size of the INFO (non-MAC) field that
+            this port will receive or transmit."
+    ::= { dot1dTpPortEntry 2 }
+
+dot1dTpPortInFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of frames that have been received by
+            this port from its segment. Note that a frame
+            received on the interface corresponding to this
+            port is only counted by this object if and only if
+            it is for a protocol being processed by the local
+            bridging function, including bridge management
+            frames."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.6.1.1.3"
+    ::= { dot1dTpPortEntry 3 }
+
+dot1dTpPortOutFrames OBJECT-TYPE
+    SYNTAX  Counter
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The number of frames that have been transmitted
+            by this port to its segment.  Note that a frame
+            transmitted on the interface corresponding to this
+            port is only counted by this object if and only if
+            it is for a protocol being processed by the local
+            bridging function, including bridge management
+            frames."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.6.1.1.3"
+    ::= { dot1dTpPortEntry 4 }
+
+dot1dTpPortInDiscards OBJECT-TYPE
+    SYNTAX   Counter
+    ACCESS   read-only
+    STATUS   mandatory
+    DESCRIPTION
+            "Count of valid frames received which were
+            discarded (i.e., filtered) by the Forwarding
+            Process."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.6.1.1.3"
+    ::= { dot1dTpPortEntry 5 }
+-- The Static (Destination-Address Filtering) Database
+
+-- Implementation of this group is optional.
+
+dot1dStaticTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF Dot1dStaticEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "A table containing filtering information
+            configured into the bridge by (local or network)
+            management specifying the set of ports to which
+            frames received from specific ports and containing
+            specific destination addresses are allowed to be
+            forwarded.  The value of zero in this table as the
+            port number from which frames with a specific
+            destination address are received, is used to
+            specify all ports for which there is no specific
+            entry in this table for that particular
+            destination address.  Entries are valid for
+            unicast and for group/broadcast addresses."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.7.2"
+    ::= { dot1dStatic 1 }
+
+dot1dStaticEntry OBJECT-TYPE
+    SYNTAX  Dot1dStaticEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+            "Filtering information configured into the bridge
+            by (local or network) management specifying the
+            set of ports to which frames received from a
+            specific port and containing a specific
+            destination address are allowed to be forwarded."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 6.7.2"
+    INDEX   { dot1dStaticAddress, dot1dStaticReceivePort }
+    ::= { dot1dStaticTable 1 }
+
+Dot1dStaticEntry ::=
+    SEQUENCE {
+        dot1dStaticAddress
+            MacAddress,
+        dot1dStaticReceivePort
+            INTEGER,
+        dot1dStaticAllowedToGoTo
+            OCTET STRING,
+        dot1dStaticStatus
+            INTEGER
+    }
+
+dot1dStaticAddress OBJECT-TYPE
+    SYNTAX  MacAddress
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The destination MAC address in a frame to which
+            this entry's filtering information applies.  This
+            object can take the value of a unicast address, a
+            group address or the broadcast address."
+    REFERENCE
+            "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
+    ::= { dot1dStaticEntry 1 }
+
+dot1dStaticReceivePort OBJECT-TYPE
+    SYNTAX  INTEGER
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "Either the value '0', or the port number of the
+            port from which a frame must be received in order
+            for this entry's filtering information to apply.
+            A value of zero indicates that this entry applies
+            on all ports of the bridge for which there is no
+            other applicable entry."
+    ::= { dot1dStaticEntry 2 }
+
+dot1dStaticAllowedToGoTo OBJECT-TYPE
+    SYNTAX  OCTET STRING
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "The set of ports to which frames received from a
+            specific port and destined for a specific MAC
+
+            address, are allowed to be forwarded.  Each octet
+            within the value of this object specifies a set of
+            eight ports, with the first octet specifying ports
+            1 through 8, the second octet specifying ports 9
+            through 16, etc.  Within each octet, the most
+            significant bit represents the lowest numbered
+            port, and the least significant bit represents the
+            highest numbered port.  Thus, each port of the
+            bridge is represented by a single bit within the
+            value of this object.  If that bit has a value of
+            '1' then that port is included in the set of
+            ports; the port is not included if its bit has a
+            value of '0'.  (Note that the setting of the bit
+            corresponding to the port from which a frame is
+            received is irrelevant.)  The default value of
+            this object is a string of ones of appropriate
+            length."
+    ::= { dot1dStaticEntry 3 }
+
+dot1dStaticStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                other(1),
+                invalid(2),
+                permanent(3),
+                deleteOnReset(4),
+                deleteOnTimeout(5)
+            }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+            "This object indicates the status of this entry.
+            The default value is permanent(3).
+                 other(1) - this entry is currently in use but
+                      the conditions under which it will
+                      remain so are different from each of the
+                      following values.
+                 invalid(2) - writing this value to the object
+                      removes the corresponding entry.
+                 permanent(3) - this entry is currently in use
+                      and will remain so after the next reset
+                      of the bridge.
+                 deleteOnReset(4) - this entry is currently in
+                      use and will remain so until the next
+                      reset of the bridge.
+                 deleteOnTimeout(5) - this entry is currently
+                      in use and will remain so until it is
+                      aged out."
+
+    ::= { dot1dStaticEntry 4 }
+
+-- Traps for use by Bridges
+
+-- Traps for the Spanning Tree Protocol
+
+newRoot TRAP-TYPE
+    ENTERPRISE  dot1dBridge
+    DESCRIPTION
+            "The newRoot trap indicates that the sending agent
+            has become the new root of the Spanning Tree; the
+            trap is sent by a bridge soon after its election
+            as the new root, e.g., upon expiration of the
+            Topology Change Timer immediately subsequent to
+            its election.  Implementation of this trap is
+            optional."
+    ::= 1
+
+topologyChange TRAP-TYPE
+    ENTERPRISE  dot1dBridge
+    DESCRIPTION
+            "A topologyChange trap is sent by a bridge when
+            any of its configured ports transitions from the
+            Learning state to the Forwarding state, or from
+            the Forwarding state to the Blocking state.  The
+            trap is not sent if a newRoot trap is sent for the
+            same transition.  Implementation of this trap is
+            optional."
+    ::= 2
+
+END